• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.132-139
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue (HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.6
• /
• pp.421-428
• /
• 2015

An important trend in the sustainment of military aircraft is the transition from preventative maintenance to condition based maintenance (CBM). For CBM, it is essential that the actual system condition can be measured and the measured condition can be reliably extrapolated to a convenient moment in the future in order to facilitate the planning process while maintaining flight safety. Much research effort is currently being made for the development of technologies that enable CBM, including structural health monitoring (SHM) systems. Great progress has already been made in sensors, sensor networks, data acquisition, models and algorithms, data fusion/mining techniques, etc. However, the transition of these technologies into service is very slow. This is because business cases are difficult to define and the certification of the SHM systems is very challenging. This paper describes a possibility for fielding a SHM system on legacy military aircraft with a minimum amount of certification issues and with a good prospect of a positive return on investment. For appropriate areas in the airframe the application of SHM will reconcile the fail-safety and slow crack growth damage tolerance approaches that can be used for safeguarding the continuing airworthiness of these areas, combining the benefits of both approaches and eliminating the drawbacks.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1110-1122
• /
• 2018

This paper proposes an alternative method to evaluate the effect of wind power to the power system stability with small disturbance. Alternatively, available techniques for stability analysis of a power system based on deterministic methods are less accurate for high penetration of wind power. Numerical simulations of random behaviors are computationally expensive. A stochastic stability index (SSI) is proposed for the power system stability evaluation based on the theory of stochastic stability and energy function, specifically the stochastic derivative of the relative well-defined energy function and the critical energy. The SSI is implemented on the modified nine-bus system including wind turbines under different conditions. A doubly-fed induction generator (DFIG) wind turbine is characterized and modeled using measured wind data from several sites in Thailand. Each of the obtained wind power data is analyzed. The wind power effect is modeled considering the aggregated effect of wind turbines. With the proposed method, the system behavior is properly predicted and the stability is quantitatively evaluated with less computational effort compared with conventional numerical simulation methods.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.871-876
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue(HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1075-1080
• /
• 2022

Recently, the effort is continuously applied in machine learning and deep learning algorithm which is represented as artificial intelligence algorithm in the varies field such as prediction, classification and clustering. In this paper, we propose detection algorithm for un-peeling status of PCB protection film by using Dectron2. We use 42 images of data as training and 19 images of data as testing based on 61 images which was taken under the condition of a critical reflection angel of 42.8°. As a result, we get 16 images that was detected and 3 images that was not detected among 19 images of testing data.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.309-323
• /
• 2005

Dynamic stiffness of subsurface materials is one of the most important geotechnical parameters in predicting deformational behavior of structures as well as practicing seismic design and performance evaluation. In an effort to measure the parameter efficiently and accurately, various borehole seismic testing techniques have been, thus, developed and used during past several decades. Moreover, recent rush of underground-space projects and increasing size of structures put more stress on reliable site investigation techniques in estimating stiffness of rock mass. In this paper, a new technique called 'in-hole seismic test' has been implemented to measure the dynamic stiffness of rock masses at subsurface foundations and tunnel-faces. The reliance of in-hole seismic test was evaluated by comparing the testing results at several rock sites with those of other borehole techniques and the technique tunnls out to be an efficient and accurate in-situ testing technique.

• Journal of KIISE:Software and Applications
• /
• v.26 no.9
• /
• pp.1105-1113
• /
• 1999

객체 지향 소프트웨어의 확장과 더불어 소프트웨어의 재사용성의 중요도가 부각되면서 소프트웨어를 콤포넌트 단위로 구현하는 추세이다. 따라서 콤포넌트 기반의 소프트웨어 개발에서의 통합 테스트가 중요한 이슈로 떠오르고 있다. 그러나 콤포넌트들의 통합 테스트에 대한 연구는 미흡한 상태이다. 본 논문에서는 UML을 기반으로 체계적인 통합 테스트 모형을 제안하고. 나아가 본 논문에서는 "멀티미디어 정보처리 시스템"의 사례를 본 논문의 콤포넌트 통합 테스트 모형에 적용한 결과를 분석하여 기술한다. 콤포넌트 통합 테스트 모형은 UML(Unified Modeling Language)의 순서도(sequence diagram)와 협력도(collaboration diagram)를 이용하여 전체 시스템에서 UML의 사건흐름을 구성하는 콤포넌트들 사이의 인터페이스 영역에 존재하는 오류들을 추출한다. 그리고 UML을 기반으로 통합 테스트를 수행함으로써, 테스트 준비 작업을 줄이고, 기존의 UML 지원 도구들과 연계하여 테스트 자동화 도구의 구현을 앞당길 수 있다. 또한 시스템의 순차적 흐름 뿐 아니라, 동시에 수행되는 흐름에 대한 정보까지 모두 수용하여 테스트함으로써, 콤포넌트 기반의 분산 환경의 특성에 적합하다. Abstract As the object-oriented approach to software development becomes more mature, software development from pre-existing, independently developed components becomes an important aim of software engineering. Therefore, integration testing becomes an important aspect of component-based software development. However, there has been little work done in the area of the component-based integration testing. In this paper, we propose the "component integration test model" which is based on UML. Furthermore, we describe a case study on "Multimedia Information Processing System" conducted to analyse the result from which our model is applied. Our model extracts the faults, which exist in interfaces of components, using sequence diagram and collaboration diagram of UML(Unified Modeling Language). As our model is based on UML, the preparation effort for testing is reduced and its test-tools can be implemented more easily through linking existing UML tool. And our model accepts the information of concurrent flow represented by collaboration diagram as well as sequential flow, so it is more suitable to component-based distributed environment.based distributed environment.

• Journal of the Korean Home Economics Association
• /
• v.41 no.11
• /
• pp.135-150
• /
• 2003

This research was to verity the effects of ICT teaching method in high school home economics. The research questions for this study were as follows: 1. Is the ICT teaching method effective in increasing students' interest in home economics and consciousness on traditional culture in teaming the unit of ‘Korean traditional culture of home life’？ 2. Is the ICT teaching method effective in improving students' achievement test and performance assessment in teaming the unit of ‘Korean traditional culture of home life’？ This study is carried out with following procedure: developing the homepage and lesson plans for ICT teaching, constructing questionnaire, and testing its reliability, pre-testing, treatment for 8 weeks, and post-testing. Two groups were arranged for 8 weeks experiment from May 7,2001 through June 30,2001. Sixteen hours of ICT teaching and 8 hours of traditional lecture for experiment group whereas 8 hours of ICT teaching and 16 hours of traditional lecture for comparison group were input. SAS program was used for statistical analysis, and independent sample t-test and matched pairs t-test were peformed for answering research questions. The results of this study were as following: 1. Sixteen hours of ICT teaching and 8 hours of traditional lecture for experiment group was effective in increasing consciousness on traditional culture and performance assessment. 2. Eight hours of ICT teaching and 16 hours of traditional lecture for comparison group was not effective in learning home economics. This means that at least 2 hours of ICT teaching is demanding for effective learning. This study concluded that ICT teaching will be effectively applied in high school home economic with well developed ICT teaching materials. And home economics educators should continuously put effort in developing curricular, teaching materials, and teaching methods to raise students' interest in home economics.

• YAKHAK HOEJI
• /
• v.55 no.6
• /
• pp.446-450
• /
• 2011

As an effort to find a new scaffold for ${\alpha}$-glucosidase inhibition, we have prepared total 11 phenylalkylated piperazine derivatives and tested their ${\alpha}$-glucosidase inhibitory activities. Compounds 8 ($IC_{50}=2.73{\pm}0.075mM$) possessing two 3-methoxyphenethyl group on 1,4-position of piperazine showed comparable potency to acarbose used as reference. But other compounds were inactive to ${\alpha}$-glucosidase. The result indicated that proper substituents on the piperazine can engender ${\alpha}$-glucosidase inhibitory activities on the piperazine derivatives.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.651-658
• /
• 2002

This paper suggests the scenario composition supporting method, which can be used to perform integration test based on specification, and implemented a scenario composition supporting tool. To compose scenario for object-oriented integration testing, requirement specification, Process definition table and program to table relation diagram are used. In addition, requirement trace table is created. It can check user's requirements, quickly and exactly, dividing former three fables into the stages of requirement analysis, design, and test. The output of scenario composition supporting tool plays a guide part in composing scenario. This tool can reduce scenario composition effort of quality for the checking team and prevent an omission of requirement and input of errors during the test.