• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.5-13
• /
• 2012

This research have investigated the application and the injection effect of the alkaline silicasol grouting materia (which is) recently developed. To compare the engineering characteristics of the alkaline silicasol which is formed with 3D-gel and the sodium silicate, it have studied the strength and environmental effects through the laboratory test, and field application was investigated with a review of the injection effect and waterproof through the field test. As a result of the laboratory test, unconfined compression strength of alkaline silicasol was 5 times more than sodium silicate. As a result of the leaching test, a total amount of the eluviated elements was very small, it considered the environment-friendly material. As a result of the field test, considerable reduction of the coefficient of permeability at the hydraulic layer was confirmed, and it could secure that the coefficient of permeability showed a lower than standard value of $10^{-5}cm/sec$.

• Industrial Engineering and Management Systems
• /
• v.13 no.1
• /
• pp.43-51
• /
• 2014

This study presents an application of adaptive particle swarm optimization (APSO) to solving the bi-level job-shop scheduling problem (JSP). The test problem presented here is $10{\times}10$ JSP (ten jobs and ten machines) with tribottleneck machines formulated as a bi-level formulation. APSO is used to solve the test problem and the result is compared with the result solved by basic PSO. The results of the test problem show that the results from APSO are significantly different when compared with the result from basic PSO in terms of the upper level objective value and the iteration number in which the best solution is first identified, but there is no significant difference in the lower objective value. These results confirmed that the quality of solutions from APSO is better than the basic PSO. Moreover, APSO can be used directly on a new problem instance without the exercise to select parameters.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.676-682
• /
• 2009

The idler wheel installed at the front side of the newly developed tracked vehicle didn't meet the durability requirement by showing the crack failure near the jointed region at the wheel during the field test. To find the crack developing mechanism we constructed finite element model for the idler wheel representing the behavior of interface between each suspension units, material properties from the material test data and actual loading conditions. This paper shows a result that maximum von Mises stress near the bolt hole on the outer rim is higher than inner idler coressponding to the actual test result and that result was reversed by adopting the reinforcement outside of the outer rim.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.748-756
• /
• 2005

The Purpose of this writing is a presentation of small turbine efficiency measuring method, applicable new technology, and several analysis result for real turbine. Measurement methods of hydraulic efficiency written in here are extracted from small turbine applicable international code(IEC, ASME). It includes brief synopsis of 'Current meter method' and 4 other methods and ASFM as a new small turbine applicable technology. And several analysis of test result are for recently performed domestic small turbine result in korea. Through this presentation of extracted code, I hope that it make other small turbine concerner be familiar to perform an efficiency test. for small turbine. And, some analysis of that, make other to feel the importance of efficiency test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.364-369
• /
• 2012

The vehicle sound classified into driving sound due to power-train, operating sound due to electric motor like sunroof, door lock and electronic sound. These vehicle sound has various features depend on the characteristic of sound that user required. And it based on cultural and regional difference of user. In this study, the user required vehicle sound characteristics for luxury sedan was investigated in overall viewpoint. And virtual target sound was developed through the result of user preference investigation. Next, Jury test was carried out in Germany, USA and Korea for evaluating the target sound. And the regional and individual difference of preference was analyzed through the result of jury test. This result of research will be contributed to design of vehicle sound quality and target sound setting.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1731-1733
• /
• 1998

This report is the first intermediate report of a series of field test result of large high voltage motors. Major specimens were 3.3/6.6kV class pump motor that was installed and operated for public water service by KOWACO(KOrea WAter resources COperation). The capacity of specimen motors were in range of several hundred kVA. Until now, we get the 22 field test result by testing technique discribed in IEEE standards and discharge-map technique reported by Japanese engineers. The test result were varied very wide range, and there was a tendency according to insulation material and manufacture.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2006-2010
• /
• 2008

This paper deal with the improvement performance and test result of traction motor for Bimodal low floor vehicles that are CNG(Compressed Natural Gas) hybrid bus. The improvement performance concept of the traction motor is studied in terms of electrical characteristics and mechanical construction. Finally, this paper introduces the result of the traction motor test for low floor vehicles, and mentioned the detail design concept of traction motor.

• Education of Primary School Mathematics
• /
• v.3 no.1
• /
• pp.37-45
• /
• 1999

This paper investigates the comparative effectiveness of two kinds of instructional methods in transfer of mathematics learning: one based on the situated cognition, ie. situated learning and the other based on traditional learning. Two classes of second graders studied the instruction about 3-digit addition and subtraction. After that, they completed two written tests and a real situation test. As a result. no significant differences were found between the two group's performance on the written test 1 and real situation test. But the situated learning group performed significantly better on the performance of story problem than traditional group. This result indicated that the situated learning made improvement in transfer of mathematic loaming. As a result of interviews with 12 children, the situated loaming group's children were able to use contextual resources in solving real situation as well as story problems.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.10
• /
• pp.894-900
• /
• 2000

The experimental study for performance improvement of aluminum/freon22 grooved heat pipe was carried out. Arterial wick was used for performance improvement of heat pipe. The experimental result was compared with screen covered grooved wick heat pipe. And also, performance test of grooved wick thermosyphon inserted straight wire in the center of grooved pipe was carried out. This result was compared with the performance test result of grooved wick thermosyphon. The operation limit of artery inserted grooved heat pipe was slightly extended, but thermal resistance of this heat pipe was twice as large as that of screen covered grooved heat pipe. In case of thermosyphon, the operation limit of grooved thermosyphon inserted straight wire in the center of grooved pipe was slightly extended, but thermal resistance was increased, comparing with that of the grooved thermosyphon.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.15-18
• /
• 2004

In this paper, it is implemented the monitoring system for TV advertisement using video watermark. The functions of an advertisement monitoring system are automatically monitoring for the time, length, and index of the on-air advertisement, saving the log data, and reporting the monitoring result. The performance of the video watermark used in this paper is tested for TV advertisement monitoring. This test includes LAB test and field test. LAB test is done in laboratory environment and field test in actually broadcasting environment. LAB test includes PSNR, distortion measure in image, and the watermark detection rate in the various attack environment such as AD/DA(analog to digital and digital to analog) conversion, noise addition, and MPEG compression The result of LAB test is good for the TV advertisement monitoring. KOBACO and SBS are participated in the field test. The watermark detection rate is 100% in both the real-time processing and the saved file processing. The average deviation of the watermark detection time is 0.2 second, which is good because the permissible average error is 0.5 second.