• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.357-360
• /
• 2004

We developed in the present study molecular imprinted polymers (MIPs), using single templates (pentoxifylline, caffeine and theophylline) and mixed-templates (pentoxifylline-caffeine, pentoxifylline-theophylline and caffeine-theophylline). The MIPs were prepared with methacrylic acid (MAA) as the monomer, ethylene glycol dimetharylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The obtained polymer particles (particle size after grinding was about 25-35 ${\mu}$m) were packed into a HPLC column (3.9 mm i.d. ${\times}$ 150 mm). The selectivity and chromatographic characteristics of the MIPs were studied using acetonitrile as the mobile phase at a flow rate of 0.8 mL/min. UV detector wavelength was set at 270 nm. Different single template MIPs showed different molecular recognitions to the templates and the structurally analogues, according to the rigidity and steric hindrance of the compounds. Recognition was improved on the mixed-template MIPs as a result of the cooperation or sum effect of the templates, whereas on the pentoxifylline-theophylline imprinted polymer, the highest selectivity and affinity were obtained. Separations of the test compounds on different polymers were also investigated.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.337-343
• /
• 2020

This study investigated the low temperature sintering with various templates of Bi-based lead-free piezoelectric ceramics. The effects of using CuO-coated Na_0.5Bi_4.5Ti₄O₁₅ templates on the sintering behavior as well as the dielectric, ferroelectric, and piezoelectric properties of Bi_1/2(Na_0.78K_0.22)_1/2TiO₃ (BNKT) ceramics have been examined. In comparison with the specimens sintered with the Na_0.5Bi_4.5Ti₄O₁₅ templates without CuO coating, those sintered with the CuO-coated Na_0.5Bi_4.5Ti₄O₁₅ templates showed larger template sizes as well as a larger electric field induced strain (S_max/E_max) of 422 pm/V after sintering at temperatures as low as 975℃. These results are promising for low-cost multilayer ceramic actuator applications.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.639-645
• /
• 2012

Embossed $TiO_2$ thin films with high surface areas are achieved using soft-templates composed of monolayer polystyrene beads. The form of links between the beads in the templates is controlled by varying the $O_2$ plasma etching time on the templates, resulting in various templates with close-linked, nano-linked, and isolated beads. Room-temperature deposition of $TiO_2$ on the plasma-treated templates and calcination at $550^{\circ}C$ result in embossed films with tailored links between anatase $TiO_2$ hollow hemispheres. Although all the embossed films have similar surface areas, the sensitivity of films with nano-linked $TiO_2$ hollow hemispheres to 500 ppm CO and ethanol gases are much higher than that of films with close-linked and isolated hollow hemispheres, and the detection limits of them are as low as 0.6 ppm for CO and 0.1 ppm for ethanol. The strong correlation of sensitivity with the form of links between hollow hemispheres reveals the critical role of potential barriers formed at the links. The facile, large-scale, and on-chip fabrication of embossed $TiO_2$ films with nano-linked hollow hemispheres on Si substrate and the high sensitivity without the aid of additives give us a sustainable competitive advantage over various methods for the fabrication of highly sensitive $TiO_2$-based sensors.

• 디지털콘텐츠학회 논문지
• /
• 제19권9호
• /
• pp.1653-1662
• /
• 2018

본 연구는 화장품 앱이 제공하는 가상 메이크업 템플릿과 메이크업 룩의 관계를 조사하였다. 한국의 20대 및 30대 여성 34명을 대상으로 설문조사한 결과, 19개 가상 메이크업 템플릿중 'Bella', 'Hilary', 'Cara' 등 3개를 가장 선호하며, 이에 상응하는 메이크업 룩은 각각 '섹시', '클래식', '내추럴'인 것으로 조사되었다. 전문가의 정성적 평가와 통계적 분석에 의한 정량적 평가를 통해 이들은 메이크업 템플릿과 유사한 메이크업 룩을 선호하고, 전반적으로 고명도의 연한 피부색과 중명도의 밝은 입술색을 선호하는 것으로 분석되었다.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.493-499
• /
• 2007

본 연구에서는 UV photo-lithography 방식의 particle replication in non-wetting templates(PRINT) 법을 이용하여 약물 전달에 운반체로 사용되는 $3{\mu}m{\times}3{\mu}m{\times}2{\mu}m$ 사이즈의 균일한 고분자 하이드로젤 입자를 제조하였다. 몰드(mold)와 기재(substrate)는 PRINT 방식을 통하여 탄성을 지닌 perfluoropolyethers(PFPE)로 제작하였으며 이를 반복적으로 사용할 수 있도록 하였다. 제작된 입자는 점착성이 있는 수용성 고분자를 이용하여 회수하였다. 입자의 주요 성분은 생분해성 고분자인 poly(ethylene glycol) diacrylate(PEG-diA)이며, 세포 uptake에 적합하도록 aminoethylacrylate(AEM)와 2-acryloxyethyltrimethyl ammonium chloride(AETMAC)를 첨가하였다. 본 연구를 통해 균일하고 원하는 크기의 생체분해성 고분자 입자를 제작하는 PRINT 기술이 약물 전달 및 유전자 전달에 필요한 수송체인 비바이럴 벡터를 제작하기 위한 효과적인 기술임을 제시하였다.

• ETRI Journal
• /
• 제31권5호
• /
• pp.628-630
• /
• 2009

Recently, Ratha and others proposed a cancelable biometrics scheme which transforms an original fingerprint template into a new one using a noninvertible transformation. However, we show that the original template is recovered by a dictionary attack if two transformed templates originating from it are revealed. In our attack, we simulate the transformation and construct a set of possible pre-images for each transformed template. Then, we find the correct pre-image by computing the intersection of these sets. We present an algorithm implementing this idea as well as successful experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.839-844
• /
• 2003

This paper presents a method to segment wafer ID marks on poor quality images under uncontrolled lighting conditions of the semiconductor process. The active multiple templates matching method is suggested to search ID areas on wafers and segment them into meaningful regions and it would have been impossible to recognize characters using general OCR algorithms. This active template model is designed by applying a snake model that is used for active contour tracking. Active multiple template model searches character areas and segments them into single characters optimally, tracking each character that can vary in a flexible manner according to string configurations. Applying active multiple templates, the optimization of the snake energy is done using Greedy algorithm, to maximize its efficiency by automatically controlling each template gap. These vary according to the configuration of character string. Experimental results using wafer images from real FA environment are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2486-2491
• /
• 2003

This paper presents a method to segment object ID marks on poor quality images under uncontrolled lighting conditions of FA inspection process. The method is based on multiple templates and normalized gray-level correlation (NGC) method. We propose a multiple template method, called as ATM (Active Template Model) which uses combinational relation of multiple templates from model templates to match and segment several characters of the inspection images. Conventional Snakes algorithm provides a good methodology to model the functional of ATM. To increase the computation speed to segment the ID mark regions, we introduce the Dynamic Programming based algorithm. Experimental results using images from real FA environment are presented.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.664-669
• /
• 2004

Anodic aluminum oxide (AAO) with pores of various diameter, density, and thickness values was obtained through control of the anodization parameters including voltage, temperature, pore widening time, anodization time, etc. The pore diameter was controlled by a pore widening in an etchant, and alumina templates having stepped nano-channels were fabricated by repetition of anodization and pore widening processes. Stepped carbon nanotubes (CNTs) were then grown on the stepped AAO templates by pyrolysis of acetylene without using the catalyst. High-resolution transmission electron microscopy images revealed that CNTs have a multi-wall structure made of graphite flakes of several nm sizes. The current-voltage characteristic of the sloped and linear CNTs were also examined.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.580-584
• /
• 2011

Corner positioning templates are proposed in order to detect the accurate positions of corners that are extracted using 4-directional edge labeling. Top-down and bottom-up directional labeling are used to label the edge segments with four kinds of labels according to their directions. The points whose labels have changed are then determined as corners. The exact positions of the missing corners due to the disconnected edges are detected through the corner positioning templates that are determined according to the labels of start-points and end-points after the two-pass edge labeling. Experiment results show that the proposed method can detect the exact positions of the real corners.