• 대기
• /
• 제17권1호
• /
• pp.17-26
• /
• 2007

The station relocations, the replacement of instruments, and the change of a procedure for calculating derived climatic quantities from observations are well-known nonclimatic factors that seriously contaminate the worthwhile results in climate study. Prior to embarking on the climatological analysis, therefore, the quality and homogeneity of the utilized data sets should be properly evaluated with metadata. According to the metadata of the Korea Meteorological Administration (KMA), there have been plenty of changes in the procedure computing the daily mean values of temperature, humidity, etc, since 1904. For routine climatological work, it is customary to compute approximate daily mean values for individual days from values observed at fixed hours. In the KMA, fixed hours were totally 5 times changed: at four-hourly, four-hourly interval with additional 12 hour, eight-hourly, six-hourly, three-hourly intervals. In this paper, the homogeneity in the daily mean temperature dataset of the KMA was assessed with the consistency and efficiency of point estimators. We used the daily mean calculated from the 24 hourly readings as a potential true value. Approximate daily means computed from temperatures observed at different fixed hours have statistically different properties. So this inhomogeneity in KMA climate data should be kept in mind if you want to analysis secular aspects of Korea climate using this data set.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.65-69
• /
• 2018

Due to large in-field current carrying capacity and strong mechanical strength, a REBCO wire has been regarded as a viable high temperature superconductor (HTS) option for high field MRI and > 1 GHz (>23.5 T) NMR magnets. However, a REBCO magnet is well known to have an inherent problem of field inhomogeneity, so-called 'Screening Current induced magnetic Field (SCF)'. Recently, 'field shaking' and 'current overshoot operation' techniques have been successfully demonstrated to mitigate the SCF and enhance the field homogeneity by experiments. To investigate the effectiveness of current overshooting operation technique, a numerical simulation is conducted for a test REBCO magnet composed of a stack of double pancake coils using '2D edge-element magnetic field formulation' combined with 'domain homogenization' scheme. The simulation result demonstrates that an appropriate amount of current overshoot can negate the SCF. To verify the simulation results, current overshoot experiments are conducted for the REBCO magnet in liquid nitrogen. Experimental results also demonstrate the possible application of current overshoot technique to mitigate the SCF and enhance the field homogeneity.

• 한국환경농학회지
• /
• 제35권3호
• /
• pp.223-233
• /
• 2016

BACKGROUND: This study was to develop a analytical reference material including twenty pesticides in tomato. To use it for proficiency test, the suitability of homogeneity, storage stability, assigned values and uncertainty for analytical reference material were important.METHODS AND RESULTS: In order to develop a analytical reference material of tomato for multi-residue analysis of pesticides, twenty-pesticides were treated in tomato and the samples were frozen and homogenized. The homogeneity, stability, assigned value and uncertainty were calculated according to the requirements of the KS A ISO Guide 35, KS Q ISO 13528 and EURL-PT protocol. The values of the within-bottle standard variation(s_wb) and the between-bottle standard variation(s_bb) were 0.9~6.5% of assigned value and the uncertainty(u*_bb) due to inhomogeneity was also calculated as 0.6~1.9% for all pesticides. This indicated that it was satisfactory to be used as a analytical reference material. The storage stabilities of twenty-pesticides at room temperature and freezing conditions were assessed according to the requirement of the KS Q ISO Guide 35. All pesticides were stable at room temperature (20~30℃) for 8 days and freezing (-20℃) for 23 days.CONCLUSION: The feasibility of analytical reference material for pesticide multi-residue analysis in a tomato matrix was investigated. Homogeneity of within/between-bottle, uncertainty and stabilities at room temperature and freezing condition were satisfactory for a use of proficiency test and quality control. From these results, a analytical reference material would be applicable to monitor the proficiency test of pesticide analysis organizations to improve the reliability and consistency.

• 대한원격탐사학회지
• /
• 제24권6호
• /
• pp.571-581
• /
• 2008

한반도의 서해에서 해무는 봄과 여름에 자주 발생한다. 본 연구의 목적은 MODIS 위성 영상을 사용하여 해무를 탐지하는 데 있다 하층운의 운정 표면은 불균질한 반면에 해무의 표면은 균질한 특징이 있으므로, 하층운과 해무의 균질성을 이용한 해무 탐지 방법이 제시되었다. 11 um의 밝기온도(BT), 3.7um와 11um의 밝기온도차(BTD)는 하층운으로부터 해무를 구별하는데 유용하였다. 안개/하층운 지역의 밝기 온도와 맑은 지역에서의 밝기 온도의 차이를 이용한 방법과 안개/하층운 지역에서 밝기 온도와 밝기온도차의 표준편차 임계값을 이용한 방법은 안개와 하층운을 구별하는데 적용될 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2013

We transformed the shape of a YBCO sample with striation to reduce hysteresis and ac losses. And we chose several points to analyze in detail and visualized superconducting properties like critical transition temperature, distribution of the magnetic field, distribution of the current density and hysteresis in a non-destructive manner based on Low Temperature Scanning Laser Hall Probe Microscopy (LTSLHPM) to examine the homogeneity of the sample.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.103-106
• /
• 1990

The purpose of this study was to determine if homogeneity of the resin associated with benchcuring could be obtained in the curing unit as the water increased from room temperature to curing temperature. The results of the experiment were as follows : 1. Long periods of bench-curing are not necessary. 2. Bench-curing can take place in the water bath of the curing unit. When this procedure is used, the water should be far enough below the temerature at which active polymerization of the resin proceeds to allow the bench-curing to occur.

• 분석과학
• /
• 제5권1호
• /
• pp.103-110
• /
• 1992

본 연구에서는 고온용 Al-Ti 합금을 제조하기 위하여 복합금속분말의 화학적 균질성과 합금내에 형성되는 미세한 분산상에 대하여 조사하였다. Al-Ti 복합금속분말의 화학적 균질성은 400rpm의 회전속도로 10시간 이상 기계적 합금화하였을 때 나타났으며 MA Al-Ti 합금의 화학분석결과, Ti 함량은 8.2wt.%, 탄소 함량은 1.135wt.%, 그리고 산소 함량은 0.233wt.%였으며, 특히 탄소 함량은 스테아린산의 공정 제어제 중에 있는 약 90% 정도의 탄소가 최종적으로 합금 시편에 혼입되었음을 알 수 있었다. TEM 분석을 통하여 MA Al-Ti 합금의 기지조직내에 구형의 250nm 크기인 $Al_3Ti$ 금속간 화합물상과 침상형태의 폭 50nm, 길이 150nm 크기인 $Al_4C_3$ 탄화물상의 형성을 관찰하였으며 구형 모양을 갖는 약 20nm 크기의 $Al_2O_3$ 탄화물상들이 이 합금의 입내 및 입계에 균일하게 분포되었음을 알 수 있었다.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.250-257
• /
• 1998

The synthesis of titanium silicides ($Ti_3Si$, $TiSi_2$, $Ti_5Si_4$, $Ti_5Si_3$ and TiSi) by mechanical alloying has been investigated. Rapid, self-propagating high-temperature synthesis (SHS) reactions were observed to produce the last three phases during room-temperature high-energy ball milling of elemental powders. Such reactions appeared to be ignited by mechanical impact in an intimate, fine powder mixture formed after a critical milling period. During the high-energy ball milling, the repeated impact at contact points leads to a local concentration of energy which may ignite a self-propagating reaction. From in-situ thermal analysis, each critical milling period for the formation of $Ti_5Si_4$, $Ti_5Si_3$ and TiSi was observed to be 22, 35.5 and 53.5 min, respectively. $Ti_3Si$ and $TiSi_2$, however, have not been produced even till the milling period of 360 min due to lack of the homogeneity of the powder mixtures. The formation of titanium silicides by mechanical alloying and the relevant reaction rates appeared to depend upon the critical milling period, the homogeneity of the powder mixtures, and the heat of formation of the products involved.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.312-317
• /
• 2011

NMR over 1 GHz (23.5 T) level has difficulties in design and fabrication with only low temperature superconducting (LTS) wire because of its material characteristics such as the decay of critical current under the magnetic field. Because High temperature superconducting (HTS) tape has a good performance under the extremely high magnetic field, it has been developed for high-field magnet over 23.5 T. In this paper, the LTS magnet was made for applying magnetic fields externally and the HTS coil was designed and fabricated. The electromagnetic field analysis has been done with respect to the structure and the operating current of the LTS and HTS coil. Considering to the field homogeneity and the center field, the design parameters which is suitable for the HTS coil were found. The HTS insert coil was impregnated with epoxy resin in order to prevent the movement of winding during energizing the magnet. The hybrid magnet (LTS/HTS) magnet was fabricated and tested based on the design parameters. The experimental result shows that the LTS background magnet and the HTS insert coil can be operated stable beyond 220 A and 210 A. The final value 4.32 T at the center was acquired.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.150-153
• /
• 2000

NMR researches are required high field and high homogeneous super-conducting magnet. Thus superconducting magnets for NMR applications are designed with minimization of coil winding volume satisfied constraints such as field strength, field homogeneity, etc. In this paper, we are discussed optimal design of high field super-conducting magnet for NMR applications. For a design example, we designed unshielded superconducting magnet for 600MHz NMR spectrometer with 100mm room temperature bore size and obtained 14.1011[T] field strength and 1.33 ppm field homogeneity.