• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.45-53
• /
• 1973

1. The sericin solubility increased rapidly as the increase of water M-alkalinity. 2. The acidity of the treated water was nutralized at the over 25ppm of M-alkalinity. 3. The more M-alkalinity of the sample water is, the more M-alkalinity was found after cocoon treat. 4. The total hardness of sample water seemed to be droped as M-alkalinity increased. 5. The sericin solubility also seemed to be droped as the increase of water acidity. 6. In case of treat finish with cocoon, the acidity and total hardness seemed to increase as the acidity of the water increased, but M-alkalinity was nutralized at 20~40 ppm of water acidity or the M-alkalinity could not be found in case over 40ppm of acidity. 7. In case increase of iron component with sample water, sericin solubility seemed to drop down, and mangan component showed the same nature but dull drop. 8. After cocoon was treated with water, acidity, M-alkalinity and total hardness were increased by the extraction from cocoon shell because of pH and treating temperature but not because of iron componnent. Mangan component, however, affected as to increase of acidity and total hardness but to decrease for M-alkalinity. 9. In case change of M-alkalinity and total hardness, sericin solubility has increased also. 10. In case constant pH and total hardness, the more M-alkalinity is, the more sericin solubility was found. 11. In case constant pH, total hardness, and M-alkalinity, the more acidity is, the less sericin solubility was found. 12. In case constant pH(6.8) and M-alkalinity, the more total hardness is, the less sericin solubility was found. 13. Though the combination of water, high solubility water, medium solubility water and low solubility water were prepared. The high solubility water desolved sericin 2.2% more than low solubility water. And the medium solubility water desolved sericin as much as 2.4~2.9%. 14. It was found that the most important factors for filature water are pH, M-alkalinity, acidity and total hardness which may need more words for optimum filature water development. 15. In case of repeat use of water, the buffer action of water has increased so that the sericin solubility to be decreased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.207-211
• /
• 1996

This study was conducted in the sandy loam soil to find out the effects of fly ash and zeolite applications on saving of irrigation water which was required great quantities during the cultivation days of dry seeded rice. Total water loss was reduced so rapidly in the early growth stage that n was the least in the 18th day after irrigation. After that day it was increasd due to the growth development and the rising temperature. In the daily mean of decreasing water level during the whole irrigation days, control was 47.7mm but the treatments of fly ash and zeolite were 31.8mm and 35.8mm respectively Amounts of the presumed irrigation water of fly ash and zeolite treatments were lower about 29.1% and 20.9%. respectively than that of control during the whole irrigation days These gaps between control and amendment treatments were greater in the early growth stage than in the late stage Hardness, bulk density and the ratio of solid phase in the soil after experiment were the highest in the fly ash treatment and those of control and zeolite treatments were showed the same trends each other. Amounts of water percoration of control and zeolite treatments in the soil were increased 8.2% and 2.6% respectively in comparision with those in the soil after amendment application, but that of fly ash treatment was decreased 42.5%, In contrast to the water percoration of control in the soil after experiment, those of fly ash and zeolite treatments were decreased 76% and 32%.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.95-103
• /
• 2012

The objective of this study was to develop models for the predict of the milk properties (fat, protein, SNF, lactose, MUN) of unhomogenized milk using the visible and near-infrared (NIR) spectroscopic technique. A total of 180 milk samples were collected from dairy farms. To determine optimal measurement temperature, the temperatures of the milk samples were kept at three levels ($5^{\circ}C$, $20^{\circ}C$, and $40^{\circ}C$). A spectrophotometer was used to measure the reflectance spectra of the milk samples. Multilinear-regression (MLR) models with stepwise method were developed for the selection of the optimal wavelength. The preprocessing methods were used to minimize the spectroscopic noise, and the partial-least-square (PLS) models were developed to prediction of the milk properties of the unhomogenized milk. The PLS results showed that there was a good correlation between the predicted and measured milk properties of the samples at $40^{\circ}C$ and at 400~2,500 nm. The optimal-wavelength range of fat and protein were 1,600~1,800 nm, and normalization improved the prediction performance. The SNF and lactose were optimized at 1,600~1,900 nm, and the MUN at 600~800 nm. The best preprocessing method for SNF, lactose, and MUN turned out to be smoothing, MSC, and second derivative. The Correlation coefficients between the predicted and measured fat, protein, SNF, lactose, and MUN were 0.98, 0.90, 0.82, 0.75, and 0.61, respectively. The study results indicate that the models can be used to assess milk quality.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.374-381
• /
• 2015

Occurrences of coastal dredged materials are ever increasing due to port construction, navigational course maintenance and dredging of polluted coastal sediments. Ocean dumping of the coastal dredged materials has become virtually prohibited as London Treaty will be enacted as of the year 2012. It will be necessary to treat and recycle the dredged materials that may carry organic pollutants and heavy metals in a reasonable and effective process: collection of the dredged materials, liquid and solid separation, and treatment of organic compounds and heavy metals. In this study we have developed a continuous bioreactor system that can treat a mixture of silt and particulate organic matter using a microbial consortium (BM-S-1). The steady-state operation conditions were: pH (7.4-7.5), temperature ($16^{\circ}C$), DO (7.5-7.9), and salt concentration (3.4-3.7%). The treatment efficiencies of SCOD, T-N and T-P of the mixture were 95-96%, 92-99%, and 79-97%. The system was also effective in removal of heavy metals such as Zn, Ni, and Cr. Levels of MLSS during three months operation period were 11,000-19,000 mg/L. Interestingly, there was little sludge generated during this period of operation. The augmented microbial consortium seemed to be quite active in the removal of the organic component (30%) present in the dredged material in association with indigenous bacteria. The dominant phyla in the treatment processes were Proteobacteria and Bacteroidetes while dominant genii were Marinobacterium, Flaviramulus, Formosa, Alteromonadaceae_uc, Flavobacteriaceae_uc. These results will contribute to a development of a successful bioremediation technology for various coastal and river sediments with a high content of organic matter, inorganic nutrients and heavy metals, leading to a successful reuse of the polluted dredged sediments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.122-130
• /
• 2013

This work proposes a 12b 100MS/s 45nm CMOS four-step pipeline ADC for high-speed digital communication systems requiring high resolution, low power, and small size. The input SHA employs a gate-bootstrapping circuit to sample wide-band input signals with an accuracy of 12 bits or more. The input SHA and MDACs adopt two-stage op-amps with a gain-boosting technique to achieve the required DC gain and high signal swing range. In addition, cascode and Miller frequency-compensation techniques are selectively used for wide bandwidth and stable signal settling. The cascode current mirror minimizes current mismatch by channel length modulation and supply variation. The finger width of current mirrors and amplifiers is laid out in the same size to reduce device mismatch. The proposed supply- and temperature-insensitive current and voltage references are implemented on chip with optional off-chip reference voltages for various system applications. The prototype ADC in a 45nm CMOS demonstrates the measured DNL and INL within 0.88LSB and 1.46LSB, respectively. The ADC shows a maximum SNDR of 61.0dB and a maximum SFDR of 74.9dB at 100MS/s, respectively. The ADC with an active die area of $0.43mm^2$ consumes 29.8mW at 100MS/s and a 1.1V supply.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2007

The morphology of gonad and reproductive cycle of ribbed gunnel (Dictyosoma burgeri) were investigated on the basis of histological observation. The specimens were monthly sampled in the coastal waters of Jeju from November 2001 to February 2003. The ovaries and testis of this species are categorized as cystovarian and lobule type, respectively. The gonadosomatic index (GSI) of female increased in November and maintained high values from December to February. The GSI of male was similar to that of female although it was decreased in February. The reproductive cycle can be grouped into the following successive stage in the ovary: growth (October to November), mature (November to February), spawning (January to February), and degenerating and recovery (March to September). And in the testis, the stage observed were: multiplication (August to November), growth (November to January), mature and spawning (November to February), and degenerating and recovery (January to September). The minimum maturation size of D. burgeri was over 15.0 cm and fecundity ranged from 2,194 to 6,581 eggs. The relationship between the fecundity and fish body was calculated in the fecundity (F) equation as: $F=0.4057TL^{3.1425}$ ($R^2=0.7621$) for total length (TL); $F=149.88BW^{0.9579}$ ($R^2=0.7982$) for body weight (BW), respectively. The fecundity was correlated positively with TL and BW. The histological observations of the gonads suggested that major spawning of this species probably occurs between January to February, when low water temperature ($13{\pm}0.3^{\circ}C$) period.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.107-108
• /
• 2008

The spectacular development of AMLCDs, been made possible by a-Si:H technology, still faces two major drawbacks due to the intrinsic structure of a-Si:H, namely a low mobility and most important a shift of the transfer characteristics of the TFTs when submitted to bias stress. This has lead to strong research in the crystallization of a-Si:H films by laser and furnace annealing to produce polycrystalline silicon TFTs. While these devices show improved mobility and stability, they suffer from uniformity over large areas and increased cost. In the last decade we have focused on microcrystalline silicon (${\mu}c$-Si:H) for bottom gate TFTs, which can hopefully meet all the requirements for mass production of large area AMOLED displays [1,2]. In this presentation we will focus on the transfer of a deposition process based on the use of $SiF_4$-Ar-$H_2$ mixtures from a small area research laboratory reactor into an industrial gen 1 AKT reactor. We will first discuss on the optimization of the process conditions leading to fully crystallized films without any amorphous incubation layer, suitable for bottom gate TFTS, as well as on the use of plasma diagnostics to increase the deposition rate up to 0.5 nm/s [3]. The use of silicon nanocrystals appears as an elegant way to circumvent the opposite requirements of a high deposition rate and a fully crystallized interface [4]. The optimized process conditions are transferred to large area substrates in an industrial environment, on which some process adjustment was required to reproduce the material properties achieved in the laboratory scale reactor. For optimized process conditions, the homogeneity of the optical and electronic properties of the ${\mu}c$-Si:H films deposited on $300{\times}400\;mm$ substrates was checked by a set of complementary techniques. Spectroscopic ellipsometry, Raman spectroscopy, dark conductivity, time resolved microwave conductivity and hydrogen evolution measurements allowed demonstrating an excellent homogeneity in the structure and transport properties of the films. On the basis of these results, optimized process conditions were applied to TFTs, for which both bottom gate and top gate structures were studied aiming to achieve characteristics suitable for driving AMOLED displays. Results on the homogeneity of the TFT characteristics over the large area substrates and stability will be presented, as well as their application as a backplane for an AMOLED display.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1017-1024
• /
• 2011

Korean wheat semolina (FS: fine semolina) with similar characteristics to durum wheat semolina was substituted at rates of 0, 10, 20, 30, 40, and 50% in pasta dough and the physical and cooking characteristics were investigated for making optimal pasta. Water absorption of the dough increased with the 10, 20, and 30% substitution ratio of FS. Development times were high with >30% substituted FS. This result positively influenced an increase in production and the preparation of the fresh noodle pasta. Furthermore, soft textured fresh noodles could be made due to the decrease in stability and increased weakness of the >30% substituted FS. The amylograph gelatinization characteristics of Korean wheat semolina exhibited an increase of gelatinization temperature and decrease of maximum viscosity when compared with durum wheat. The handling property of the dough showed more than 4 points in all sample groups. Weight and volume decreased and turbidity and cooking loss increased according to the increasing amount of substituted FS. However, samples with ${\leq}$ 30% FS substitution ratio had similar volumes and cooking losses when compared to the control. The L- and a-values increased and the b-value of color decreased as more FS was added. In a texture analysis, the hardness of the cooking noodles showed a low value with the >30% substituted FS. Springiness, gumminess, and chewiness exhibited a high value. In the results of a sensory evaluation, overall acceptability was high score with more than 7 points for the 30% added FS. The preferences for pasta colors were divided into white, which is similar to the Korean traditional noodle, and yellow, which is similar to durum wheat. Flavor and taste were not affected by substituting with FS. Low hardness and high chewiness was the most preferred noodle. These results suggest that >30% substituted FS was suitable for increasing quality and organoleptic qualities of Korean wheat pasta.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.112-132
• /
• 1975

When Korean family planning services began as a part of the National Policy in 1962, the annual population growth was 3.0%. This growth rate has been decreased to 2.0% during last ten year period. And it seems imperative that all hospitals, as well as related organizations, should participate in family planning in order to contribute to achieving the National goal of 1.5% population growth by 1976, the end of the Third Five Year Economic Development Plan. Nurses should be considered the most important human resources in charge of the core of family planning services in any setting. For the family planning services in the general hospital setting, nurses as a core members contribute much as change agent, motivators, counsellors, educators etc. A nurse can work with patients and their relatives when she is equipped with relevant knowledge and skills. Fur the more family planning cannot be ignored even in hospital setting where more comprehensive nursing care is needed Thus, the general objective of this study is to provide baseline data for better programming of In-service education in family planning so that effective hospital family planning nursing services can be made a part of comprehensive nursing care contributing to the national population program and human welfare. In order to meet the general objective, this study has the following specific objectives : 1. To find out the general characteristics of the clinical nurses working in Y Hospital 2. To evaluate their attitudes and practices of family planning 3. To assess their knowledge, attitudes and practices of population and family planning as professional nurses. 4. To examine and compare data collecting methods for the planning of an In-service Educational Program 5. To explore the contents to be included in this In-service Education Program. The study population randomly selected one hundred nurses working in Y Hospital A cross-sectional survey with questionnaires developed for this study was chosen for the study method. To collect reliable data, the questionnaires were distributed to and answered by the study population in a controlled situation. X²test and t-test was employed in analyzing the data. The findings of this study are as follows: 1. Y Hospital nurses had a lower ideal number of children (X=2.02) and showed no strong preference for male children, and 74% of them expressed the desire to use permanent methods of birth control 2. of this thirty Y Hospital nurses who were married 66.7% stated they were already practicing contraceptive methods. Most of them preferred male methods of contraception. 3. According to objective evaluation about knowledge of various aspects of population and family planning, respondents from collegiate programs significantly knew better the subjects on the average than did respondents from diploma programs of nursing. 4. There was a marked difference in the results of self-evaluation and objective evaluation in their family planning knowledge. It was found that the self-evaluation family planning knowledge seemed to be unreliable. Accordingly, the objective test methods appeared to be more reliable in the evaluation of knowledge levels. 5. The subject areas needed to be included in In-service education for the Hospital family planning services in Y Hospital are 1) rhythm methods, 2) tubal-legation, 3) family planning effects of contraceptives, 4) population growth, 5) demographic traction, 6) population structure and 7) infant mortality facts. In addition, 1) various oral contraceptives, 2) basal temperature method, 3) laparoscopic female sterilization, 4) interfering factors of family planning, 5) anatomy and physiology of the female reproductive organs were additional areas to be taught to respondents from 3-year diploma schools of nursing. Demographic transition was one subject area in which the four-year graduates need further study. 6. Population problems guidance and counselling in family planning instruction in the theory and practice of contraceptives should be included in future In-service Education Programs in order to provide more effective hospital Family Planning Services, stated 77.0% of the respondents.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.256-262
• /
• 2011

Amine can undergo irreversible reactions by $O_{2}$ and high temperature in amine scrubbing process and these phenomena are called "degradation". Degradation causes not only a loss of valuable amine, but also operational problems such as foaming, corrosion and fouling. In this study, using various chemical absorbents(MEA; monoethanolamine, AMP; 2-amino-2-methyl-1-propanol, DAM; 1,8-diamino-p-menthane), we examined the following variable. I) loading ratio of $CO_{2}$ at $50^{\circ}C$ and $120^{\circ}C$, ii) concentration variation and initial degradation rate constant of absorbent in $CO_{2}$ and $CO_{2}/O_{2}$ system, and iii) effect of degradation by $O_{2}$. The $CO_{2}$ loading of 20 wt% DAM was 400% and 270% higher than that of 20 wt% MEA and AMP at 50, respectively and was the largest the difference of $CO_{2}$ loading between absorption $(50^{\circ}C)$ and regeneration $(120^{\circ}C)$ condition. The initial degradation rate constant of 20 wt% DAM was $2.254{\times}10^{-4}cycle^{-1}$ which was slower than that of MEA $(2.761{\times}10^{-4}cycle^{-1})$ and AMP $(2.461{\times}10^{-4}cycle^{-1})$ in $CO_{2}$ system. Also, it was increased 30% by $O_{2}$ that effects on the degradation by $O_{2}$ was less than 100% increased. these degradation reactions was able to identify by formation of new peak in GC and FT-IR spectrum analysis.