• 한국수소및신에너지학회논문집
• /
• 제6권2호
• /
• pp.91-100
• /
• 1995

To investigate the surface state of $Mg_2Ni$ which was exposed to the air, a chemical treatment was undertaken with $H_2SO_4$ solution. During chemical treatment, the change of pH was measured continuously and the chemically treated specimen was hydrided to study the effect of chemical treatment on the hydrogenation. The pH changing behavior with the various $H_2SO_4$ concentration appeared very diffemrently. Especially in the solution including 3CC $H_2SO_4$, the behavior of pH change can be divided 3 steps. It is also shown that the $Mg_2Ni$ chemically treated with $H_2SO_4$ can be hydrided even under room temperature. By the SEM observation the was reasion that after chemical treatment the surface of a particle was covered with Ni layer.

• 공업화학
• /
• 제18권5호
• /
• pp.454-458
• /
• 2007

본 연구는 알루미나를 이용하여 수용액 중에 존재하는 $Ca^{2+}$, $Mg^{2+}$, $Sr^{2+}$, $SO{_4}^{2-}$, $NO{_3}^-$, $Cl^-$ 이온의 제거 특성을 분석하기 위하여 실시하였다. 알루미나는 $Al(NO_3)_3{\cdot}9H_2O$와 $NH_4OH$를 사용하여 합성한 수화물을 $450{\sim}750^{\circ}C$로 5 h 동안 열처리하고 FT-IR과 Brunauer-Emmett-Teller (BET)법으로 물성을 분석하였다. 실험결과에 의하면 알루미나의 비표면적은 열처리 온도가 증가하면 감소하는 특성을 나타내었다. 알루미나에 의한 흡착능은 $SO{_4}^{2-}$와 $NO{_3}^-$가 각각 23 mg/g와 12.4 mg/g의 값을 보였다. 반면에 $Cl^-$는 4 mg/g으로 비교적 낮은 값을 보였다. 일반적으로 음이온 제거 효율은 알루미나의 제조를 위한 열처리 온도가 증가할수록 감소하였으며, $450^{\circ}C$로 처리한 알루미나의 경우에 가장 좋은 처리 효율을 나타내었다. 양이온인 $Ca^{2+}$, $Mg^{2+}$, $Sr^{2+}$의 제거 효율은 알루미나의 열처리 온도에 비례하여 증가하는 경향을 보였다.

• 한국환경복원기술학회지
• /
• 제17권2호
• /
• pp.85-92
• /
• 2014

This text was analyzed and investigated the morphological character, production time and germination characteristic of seed that collect in Chungnam, in order to offer the basic informations for slope restoration and revegetation using Indigofera amblyantha of wild shrub. Legume was cylindrical type and length 31.5mm, width 2.5mm, and seed number of per legume was full ripe 5.5, unripe 0.9. Seed was elliptical type and length 2.4mm, width 1.7mm, and weight of 1,000 seeds was 5.9g. Because seed matured within December and next year January, optimum time of seed production was in mid of January. In the treatment $H_2SO_4$ of 15 minutes, seed germination rate was the highest as 91.0%, and seed germination time (days) was the shortest as 6.7 days. Seed germination time by temperature was the shortest from $25^{\circ}C$. Therefore, seed germination of Indigofera amblyantha was very useful in the treatment $H_2SO_4$ of 15 minutes from $25^{\circ}C$ temperature.

• 자원리싸이클링
• /
• 제10권1호
• /
• pp.25-31
• /
• 2001

폴리염화비닐(PVC) 64.5%, 프탈산디옥틸(DOP) 32.2%, 칼슘-아연 스테아린산 안정제 및 계면활성제 등으로 되어진 PVC 필름을 $H_2O$, $Ca(OH)_2$ 그리고 $H_2$$SO_4$용액중에서 반응온도 $200-250 ^{\circ}C$, 반응시간 0-12시간으로 수열처리하였을 경우 PVC의 탈염화수소 및 생성되는 탄소질에 관해서 조사했다. $ H_2$ $SO_4$의 경우에는 탈염화수소가 빨라 25$0^{\circ}C$, 3시간 이상에서는 탈염화수소율이 거의 100%에 도달했다. 또한 이들의 수열처리에서는 다공질의 탄소질이 생성되었고 온도가 높을수록, 그리고 반응시간이 길수록 이들의 세공경은 작아졌다. $Ca(OH)_2$의 경우에는 $225^{\circ}C$, 12시간에서는 약 5-10 $mu extrm{m}$정도의 세공이 생성되었다. 그리고 $H_2$$_SO4$의 경우에는 5M의 $_H2$$SO _4$로 12시간 처리하였을 경우 약1 $\mu\textrm{m}$정도가 되었다

• 한국가정과학회지
• /
• 제3권1호
• /
• pp.51-63
• /
• 2000

The purpose of this study was to identify the best dyeing conditions using onion's outer shell. and to apply to the method in practical daily life. To do this. we extracted quercetin from onion's outer shell and dyed several natural fabrics such as cotton, slack mercerized cotton, ramie. and silk. under the different conditions. Dyed fabrics were Investigated in the aspect of dyeability and colorfastness. The effective conditions for the light-fastness and washing-fastness also have been studied. The results of the experiment were varied with such conditions as temperature. time. pH degree. and treatment and types of mordants. The results are as follows ; 1. Fabrics dyed with onion's outer shell showed excellent dyeability even though there were no mordants, and the silk fabric dyed better than both cotton and ramie fabric. Furthermore, in the cases of repeated dyeing and treatment of mordants using AIK(SO$_4$)$_2$.12$H_2O$ and CuSO$_4$,.5$H_2O$ dyeability of specimen had been improved 2. Cellulose fabrics such as cotton, mercerized cotton and ramie showed the best dyeability under relatively low temperature in the range of 20~4$0^{\circ}C$. On the contrary to cellulose fabric, silk fabric showed the best dyeability under higher dyeing temperature. All fabrics had the higest K/S value at pH 3 regardless of the kind of fiber 3. Dyeing colors varied with the kind of mordants. Colors were turned into yellow in AIK(SO$_4$)$_2$.12$H_2O$ into Yellow-red in CuSO$_4$,.5$H_2O$ , and into green-Yellow in FeSO$_4$.7$H_2O$. As mordants, AIK(SO$_4$)$_2$.12$H_2O$, CuSO$_4$,. 5$H_2O$. FeSO$_4$.7$H_2O$. gallic acid and tartaric acid were used and especially AIK(SO$_4$)$_2$.12$H_2O$ showed the best dyeability and colorfastness in repeated dyeing. Mordants such as AIK(SO$_4$)$_2$.12$H_2O$ made fabrics have better chroma and washing-fastness though the light-fastness was poorer than non mordanting. 4. Repeated dyeing brought us deep color. When fresh dyebath was used each time, the dyeability was increased as the experiment was repeated more. When dyed with used dyebath several times, improved dyeability could not be expected. The optimal using times of the used dyebath was twice.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.157-161
• /
• 1982

The possibility of extraction of alumina from domestic Ha-dong kaolin was studied by sulfuric acid treatment. Raw kaolin was calcined at various temperature (500-110$0^{\circ}C$) and calcined kaolin were treated with sulfuric acid. The tendency of extraction yield of alpha alumina have been investigated by relating reaction time, temperature, and acid concentration. After reaction, precipitates were analyzed by DTA, TGA, and identified alpha alumina by X-ray diffractometer with calcined sample at 120$0^{\circ}C$. The results were as follows; 1. The optimum calcination temperature was 800-86$0^{\circ}C$. 2. The most suitable extracting conditions of alpha alumina were 40 wt%-$H_2SO_4$, 2-3 hours acid-treating time and 8$0^{\circ}C$ acid-treating temperature. 3. Precipitates were composed of $(NH_4)_2SO_4$, $Al_2SO_4(OH)_4$ 5-7 $H_2O$ and $Al(OH)_3$.

• 한국표면공학회지
• /
• 제53권3호
• /
• pp.87-94
• /
• 2020

Herein, sulfonated carbon nanotubes (CNT) have been prepared in dilute sulfuric acid (H₂SO₄) via a novel sulfonation approach based on gas-liquid interfacial plasma (GLIP) at room temperature. The sulfonic acid groups and total acid groups densities of CNT after GLIP treatment in 2 M H₂SO₄ for 45 min can reach to 0.53 mmol/g and 3.64 mmol/g, which is higher than that of sulfonated CNT prepared under 0.5 M / 1 M H₂SO₄. The plasma sulfonated CNT has been applied as catalysts for the conversion of microcrystalline cellulose to glucose. The effect of hydrolysis temperature and hydrolysis time on the conversion rate and product distribution have been discussed. It demonstrates that the total conversion rate of cellulose increasing with hydrolysis temperature and hydrolysis time. Furthermore, the GLIP sulfonated CNT prepared in 2 M H₂SO₄ for 45 min has shown high catalytic stability of 85.73 % after three cycle use.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.154-158
• /
• 2001

The heat treatment of PVC film containing PVC 65%, DOP(Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and surface agent was peformed under several conditions to study the degradation behavior of PVC sheet. In the case of H$_2$SO$_4$, the dehydrochlorination was ca.100% at 25$0^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydrothermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with Ca(OH)$_2$, the sizes of pores produced in char were about sever ~ 10${\mu}{\textrm}{m}$ at 2$25^{\circ}C$ for 12h. In the case of H$_2$SO$_4$, the size of pores were about 1${\mu}{\textrm}{m}$ in 5M H$_2$SO$_4$for 12h.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.746-750
• /
• 2001

The heat treatment of PVC film containing PVC 65%, DOP(Dioctyl Phthalate) 32% as plasticizer, Ca-Zn stearates and surface agent was peformed under several conditions to study the degradation behavior of PVC sheet. In the case of H$_2$SO$_4$, the dehydrochlorination was ca.100% at 25$0^{\circ}C$ for 3h. The char involving the smaller pores was produced with hydrothermal treatment. The pore size became small with increasing the treatment time and temperature. In the case of treatment with Ca(OH)$_2$, the sizes of pores produced in char were about sever ~ 10${\mu}{\textrm}{m}$ at 2$25^{\circ}C$ for 12h. In the case of H$_2$SO$_4$, the size of pores were about l${\mu}{\textrm}{m}$ in 5M H$_2$SO$_4$for 12h.

• 한국표면공학회지
• /
• 제24권2호
• /
• pp.103-113
• /
• 1991

Electroless Ni-Cu-P alloy plating of Al base hard disk was performed to investigate some properties according to the change of composition. It was found that the composition of Ni and Cu in deposits changed linearly with increasing the mole ratio of NiSO4.6H2O/CuSO4.5H2O. The increase in hardness by heat - treatment was confirmed to be associated with small size grained crystallization of the amorphous deposits. Acid resistance of all deposits layer. which had been heated up to 30$0^{\circ}C$, was found to be exellent when immersed in 1N-H2SO4 solution, and it showed more superior acid resistance with decreasing Cu content and with increasing P. The resistivity of the deposits heat treated became smaller at temperature more than 50$0^{\circ}C$, and it became largerly with increasing P content. Cu 44.1wt% alloy(C bath) showed the most superior non-magnetically stable characteristics after heat treatment. It was superiorly with higher temperature and with decreasing P content.