• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.74-76
• /
• 2017

Although many prosthetic materials exist for fabrication of implant-supported telescopic overdentures, available materials have not been thoroughly evaluated from a functional standpoint. This case report describes the use of polyaryletherketone (PAEK) based polymer for an implant-supported telescopic overdenture, a seldom used material in dentistry. This material is lighter than traditional materials, can accommodate changes in retentive forces, and is an easily retrievable by CAD/CAM fabrication. This case highlights the possibility of using new polymer materials for implant-supported telescopic overdentures.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.104-126
• /
• 1999

The purpose of this study was to compare and evaluate the stress distribution and displacement developed in the abutment teeth and residual ridge area by madibular unilateral distal extension removable partial denture with 2 different retainer designs. The retainers on right and left canine and right 2nd molar were Alters clasp in one model and telescopic crown in the other model. The stress distribution of abutment teeth and residual ridge area on two model were compared and analyzed with 3-dimensional finite element method. 150N and 400N forces were applied vertically, 30 degree and horizontally on the central fossa area of left 1st molar of the removable partial denture, and then stress distribution patterns were analyzed and compared. The results were as follows 1. As the magnitude and angulation of applied force were increased, the magnitude of stress on the right and central residual ridge area and the right canine of the telescopic type increased and comparing to those of the Alters clasp type. 2. As the magnitude and angulation of applied force were increased, the mesial direction of displacement on the right residual ridge area and the right tooth of the telescopic type increased and the distal direction of displacement on left residual ridge area and the left canine increased comparing to those of Akers clasp type. 3. As the vertical force was applied, the distal direction of the displacement of the right tooth were greater and that of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. 4. As the 30 degree force was applied, the mesial direction of the displacement of the right tooth were greater and the distal direction of the displacement of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. In the horizontal force the results were same in right area tooth but the distal direction of displacement was greater in left canine. 5. In both removable partial dentures, as the magnitude and degree of force were increased, the stress and displacement were increased. The compressive force was dominative than the ten sile force. 6. In both removable partial dentures, the magnitude of stress was greater on mucosal tissue area than that of the alveolar bone area on distal extension residual ridge area but the result was reversed on anterior residual ridge area. The displacement was always greater on mucosal tissue area than that of alveolar bone area.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.486-503
• /
• 1997

The purpose of this study was to evaluate the stress patterns developed in abutment and residual ridge according to removable denture design in case of remaining mandibular canines. The removable denture designs in this study were as foolows : 1. Removable partial denture with non-splinted abutment 2. Removable partial denture with splinted abutment 3. Overdenture with telescopic crown 4. Overdenture with O-Ring attachment 5. Overdenture with combination bar attachment Photoelastic stress analysis was used to record the isochromatic fringe patterns and to calculate principal stress components at measuring points. The results were as follows : 1. In case of removable partial denture with non-splinted abutment, stress of root area at the loaded side was the largest. No significant differences in stress of root area were observed between loaded side and unloaded side. 2. No significant differences in stress of residual ridge at the loaded side were observed between removable partial denture with splinted abutment and removable partial denture with non-splinted abutment. 3. In case of combination bar attachment retained overdenture, stress of root area was the largest and in case of telescopic crown retained overdenture, stress of root area was the lowest. 4. In case of attachment retained overdenture, stress of residual ridge was lower but stress of root area was larger than in case of removable partial denture.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.139-151
• /
• 2003

This study was to evaluate and to compare the compressive strength and the displacement effecting the abutment or the residual ridge which are transformed by the angle and the heights of the konus denture inner crown when restorating the unilateral konus denture by using the mandibular canine and the 1st premolar as an abutment. The author made 9 different models for different inner crown heights and konus angles. The inner crown height were divided to 5mm, 6mm, and 7mm and konus angles was divided to $4^{\circ}$, $6^{\circ}$, and $8^{\circ}$. And then in each model, 5kg of $15^{\circ}$ mesial load was stressed on the central fossa of the 1st premolar and the 1st molar. The stresses and displacement were measured using the finite element analysis. The results were as follows 1. The maximum compressive strength was shown on the connective area of the abutment and the denture base. 2. As the angle of the inner crown becomes increased, the compressive strength was shown smaller. 3. As the height of the inner crown becomes increased, the maximum compressive strength was shown smaller while the compressive strength of the root apex and the residual ridge showed larger. 4. When the stress was loaded only on the 1st premolar, the more compressive strength was concentrated on the root apex area of the 1st premolar. 5. When the stress was loaded only on the 1st premolar, the compressive strength was concentrated uniformly on the abutment and the residual ridge. 6. When the stress was loaded only on the 1st molar, the maximum displacement was shown on the distal part of the residual ridge.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.308-316
• /
• 2018

이중관 의치는 지대치 장축 방향으로의 교합력 전달, 구강위생관리 용이, 유지 및 안정의 증가, 지대치 간의 2차적인 연결 고정으로 인한 부목효과 등의 장점을 가지며 일반적인 국소의치에 비해 높은 성공률이 보고되고 있으나 기공과정이 복잡하고 치료기간 및 비용이 증가하며 합병증의 발생이 많은 단점이 있다. 본 증례보고는 기능적으로 만족스러운 결과를 얻은 상악의 4점 지지의 텔레스코프관을 이용한 이중관 의치를 제작한 증례와 상악의 2점 지지의 원추관을 이용한 이중관 의치를 제작한 증례를 보고하고자 한다. 여러 문헌을 통하여 보고되는 이중관 의치의 합병증을 고찰하고, 이와 관련하여 임상 및 기공과정에서 주의할 점을 고려하여 치료를 진행하였다.

• 대한치과보철학회지
• /
• 제59권4호
• /
• pp.415-421
• /
• 2021

소수 잔존치가 남아있거나 치주적으로 불리한 경우 전통적인 가철성 국소의치의 생역학적 예후가 불분명하다. 이러한 경우, 하이브리드 텔레스코픽 이중관 국소의치(hybrid telescopic double crown RPD)는 성공적인 치료의 대안이 될 수 있다. 이 치료방법의 경우 지대치 간의 이차고정 효과가 있으며 응력의 방향이 수직적이고, 지대치 발치 시에 의치의 수리가 용이하다는 점에서 전통적인 가철성 국소의치에 비해 장점을 보인다. 본 증례에서는 전치부의 과개교합을 가진 상하악의 부분 무치악 환자에 있어 상악에는 이중관 의치, 하악에는 임플란트 및 고정성 보철치료가 시행되었다. 장기간 동안 경과관찰 및 유지관리 치료를 시행한 결과, 기능 및 심미적인 면에서 만족할 만한 성과를 얻었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.185-199
• /
• 1999

This study was peformed to investigate the distribution and magnitude of stress at supporting tissue of abutment teeth and residual ridge tissue with remaining unilateral posterior teeth. Four types of removable partial dentures that included clasp retained removable partial denture, attachment retained removable partial denture, telescopic removable partial denture, and swing-lock partial denture were designed, and strain gauge was used for stress analysis. Each prosthesis was subjected to simulated vertical and oblique load. The following conclusions were drawn from this study. 1. The clasp retained removable partial denture generally distributed simulated vertical force more evenly to the supporting structure. 2. The stress at buccal side of 1st premolar was the lowest in swing-lock partial denture and that was highest in attchment retained removable partial denture. The stress at lingual side of 1st premolar was the lowest in telescopic partial denture. 3. In clasp retained removable partial denture, stress was lower at load site and ridge crest at mid-line, but it was higher at 1st premolar area on vertical load. 4. In attachment removable partial denture, stresses at buccal side of 1st premolar. lingual side of 1st premolar on vertical load, and ridge crest at midline on oblique load were higher. 5. In telescopic removable partial denture, stress at lingual side of 1st premolar was the least in all removable partial dentures, but the stress at load site was higher. 6. In swing-lock removable partial denture, stress at buccal side of 1st premolar was the lowest, and stresses at load site and distal end of residual ridge crest were higher.

• 대한치과보철학회지
• /
• 제59권2호
• /
• pp.201-209
• /
• 2021

가철성 국소의치 치료 시 유지력을 얻는 방법에 따라 많은 연구와 임상적인 적용이 이루어 지고 있다. 그중 한 종류인 이중관 의치는 독일과 스웨덴과 같은 유럽의 나라에서 널리 사용되어지고 있다. 텔레스코픽 이중관 국소의치는 구강 위생관리의 편의성, 지대치로 교합력의 수직적인 전달, 그리고 지대치들 간의 2차적인 고정과 같은 장점들이 있어 클라스프 유지형 가철성 국소의치에 비해 임상적으로 더 나은 결과를 보여줄 수 있다. 본 증례에서 처음에 환자는 자연치를 이용하여 상악에 프릭션핀을 이용한 하이브리드 텔레스코픽 이중관 의치를 제작하였습니다. 7년 뒤 환자의 불량한 구강위생관리 습관과 정기검진의 부재로 지대치들에 치주염이 발생하였고 5개중 4개의 자연치 지대치를 발치하게 되었다. 남은 1개의 자연치 지대치의 내관을 그대로 사용하면서 3개의 추가적인 임플란트를 식립하였다. 대합치인 하악이 고정성 보철임에도 불구하고 전략적인 임플란트 식립으로 인해 환자는 새롭게 제작된 상악 치아-임플란트 연합 이중관 의치에 적응하였고 만족하였다.

• The Journal of Advanced Prosthodontics
• /
• 제12권1호
• /
• pp.38-48
• /
• 2020

PURPOSE. The objective of this literature review was to analyze the cumulative survival rates (CSRs) of rigid and non-rigid double-crown-retained removable dental prostheses. MATERIALS AND METHODS. Screening of the literature published from January 1995 to December 2019 was performed by using electronic data base (Pubmed) and manual search. The CSRs of rigid and non-rigid double crown removable dental prostheses were investigated. RESULTS. A total of 403 articles were reviewed and 56 relevant articles of them were selected. Subsequently, 25 articles were included for data extraction. These articles were classified according to rigid and non-rigid type double crowns and further subdivided into teeth, implants, and teeth-implant combination types. The CSRs of rigid type double crown ranged from 68.9% to 95.1% of 5 to 10 years in tooth abutments, 94.02% to 100% over a 3-year mean observation periods in implant abutments, and 81.8% to 97.6% in tooth-implant combination. Non-rigid type double crowns had various CSR ranges from 34% to 94% maximum during 10 years observation in teeth abutment. The CSRs of non-rigid type had over 98% in implant abutments, and ranged from 85% to 100% in tooth-implant combination. CONCLUSION. The CSRs of double crowns varies according to types. With accurate evaluation of the remaining teeth and plan of the strategic implant placement, it could be successful treatment alternatives for partially or completely edentulous patients.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.384-390
• /
• 2018

치주적으로 지지가 불리한 소수의 잔존치가 남은 환자에게 있어 하이브리드 텔레스코픽형 이중관의치는 장기적으로 안정적인 예후를 보이는 치료가 된다. 편측 악궁에 소수 잔존치가 남고 반대측 악궁에 다수의 자연치가 존재 하는 경우 임플란트를 식립하여 자연치와 혼재된 형태의 이중관 의치를 제작 할 시 의치의 지지 및 안정요소의 향상과 더불어 저작력의 균형을 맞추어 줄 수 있게 된다. 본 증례는 55세 여자 환자로 만성 치주염으로 인해 치주 지지가 감소한 소수 잔존치 상태에서 자연치만으로 하이브리드 텔레스코픽형 이중관 의치 치료를 통해 9.5년간 의치를 사용하였다. 9.5년 후 지대치 파절로 내원 하여 임플란트의 식립을 통해 자연치와 임플란트가 혼재된 하이브리드 텔레스코픽형 이중관 의치로 재수 복 하였으며, 이를 통해 재 치료에서도 장기적 예후의 안정성을 기대 할 수 있다.