• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.157-167
• /
• 2012

This study aimed to interpret the provenance and firing temperature of pottery from Chipyeongdong site in Gwangju, Korea though mineralogical and geochemical methods and also investigated the post-depositional alteration of pottery in burial environments. It is also presumed that they were made of soils near the site because they have similar mineralogical composition and same geochemical evolution path. Based on the results of mineralogical analysis, the pottery samples are largely divided into 2 groups; $700^{\circ}C$ to $1,000^{\circ}C$ and 1,000 to $1,100^{\circ}C$. At some pottery fired at over $1,000^{\circ}C$, it is thought that the refinement of raw materials were processed to remove macrocrystalline fragments. However, it was found that phosphate in soil environments formed amorphous aggregates with Al and Fe within the pores and voids on pottery fired at the low temperature. It indicates the contamination of pottery after burial.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.455-463
• /
• 2011

Conventional construction technologies have been continually applied without consideration of its impact to the environment. This resulted to various problems including the negative responses of local citizens that regarded some constructed facilities as aversive facilities causing environmental and hydraulic problems in the urban area, etc. To prevent these problems, therefore, alternative methods should be undertaken. A new approach termed "Low Impact Development (LID)" technology is currently adapted in developed countries around the world. This study aims to investigate the efficiency of the developed small constructed wetland (SCW) with horizontal subsurface flow as a LID technique applicable in urban areas. Two test-bed facilities were constructed and monitoring had been conducted between July 2010 and June 2011. Based on the findings, the removal efficiencies achieved for TSS, $COD_{Cr}$, TN, TP, Total Fe, Total Pb for the SCW-1 were 66, 53, 46, 55, 67 and 50%, respectively. On the other hand, the SCW-2 attained 82, 62, 51, 48, 74 and 42% efficiency for TSS, $COD_{Cr}$, TN, TP, Total Fe, Total Pb, respectively. The results indicated that the removal of particulate matter and heavy metals which are considered as main pollutants from stormwater runoff in urban areas was satisfactory in the system. Therefore, the test-beds proved to be appropriate for the treatment of pollutants in urban landuses such as road, parking lot, etc. The results of this study can contribute to the conservation of aquatic ecosystems and restoration of natural water cycle in the urban areas.

• Journal of Conservation Science
• /
• v.22
• /
• pp.31-42
• /
• 2008

A stone cultural heritage often lacks design drawing and detailed geometric informations, thus it becomes more difficult to conservation and restoration. Even though there is active database of detail shape information and numerical measurement for stone monuments, most of the data is in hard-to-utilize two-dimensional images. The new technology developed to overcome this problem is three-dimensional image scanning system. The multi-storied stone pagoda of the Daewonsa temple was analysed with 3D scanning image data then survey map with orientation displacement was evaluated. The difference of each side became apparent with the members of the stone properties was measured, also horizontal and vertical displacement occurred. Horizontal displacement occurred in increasing severity from left to right and from body section to upper part. The 8th roof stones are leaning toward northwest direction due to lateral displacement. The evaluation and measurement of displacement could cause a little errors due to the characteristics uneven surface of stone monuments, computer program and mistakes from the researcher. In future, more precise measurement and stability studies should be done to suggest that accurate data for conservation and understanding of damage condition can be provided.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.103-119
• /
• 2020

Recently, the rapid redeposition and erosion of rivers artificially created by climate change and the Four Rivers Restoration Project is questionable. According to the revised law in Korea, the river management agency will periodically carry out bed changes surveys. However, there are technical limitations in contrast to the trend of increasing spatial coverage, density and narrowing of intervals. National organizations are interest in developing innovative bed changessurvey techniquesfor efficiency. Core of bathymetry survey is to measure the depth of rivers under a variety of river conditions, but that is relatively more risky, time-consuming and expensive compared to conventional ground surveys. To overcome the limitations of traditional technology, echo sounder, which has been mainly used for ocean depth surveying, has been applied to rivers. However, due to various technical limitations, it is still difficult to periodically investigate a wide range of areas. Therefore, technique using the remote sensing has been spotlighted as an alternative, especially showing the possibility of depth measurement using spectral characteristics. In this study, we develop and examine a technique that can measure depth of water using reflectance from spectral characteristics. As a result of applying the technique proposed in thisstudy, it was confirmed that the measured depth and the correlation and error corresponding to 0.986 and 0.053 m were measured in the depth range within 0.95 m. In the future, this study could be applied to the measurement of spatial depth if it is applied to the hyperspectral sensor mounted on the drone.

• Journal of Conservation Science
• /
• v.20
• /
• pp.67-80
• /
• 2007

Icheon Seolbong fortress is located in Saum-dong, Icheon, Gyeonggi-do Province that its date is founded as 4th century of Bakjae dynasty after excavation by Dankook university museum. Excavated artifacts show various kinds such as earthenwares, ceramics, metal artifacts and so on. Especially many iron artifacts were founded in where Bakjae earthenwares were found that it indicates iron artifacts were manufactured in Bakjae Dynasty. From 6 iron sickles, called Beollat and Millet, samples were taken to examine mircostructures and from the results used iron material, shape-forging, steel-making process, heat treatment were investigated. From this late 4th century Bakjae dynasty iron manufacture profess was established. From the result, different treatment were used in different area of the sickles according to the its use. Beollats were quenched in blade and it was used for special purpose that require Intensity. Millats did not have special treatment that it was used to cut rice plant and plant. Used material was steel, steel was previously made by certain steel-making process. It is formed to produce iron ware and the area where intensity is required heat treatment was employed to make it strong. From the investigation it is derived that iron ware manufacture process in Bakjae dynasty is steel making$\rightarrow$shape-forging$\rightarrow$and heat treatment.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.249-259
• /
• 2016

Effect of the flame retardants on Dancheong is studied in the present work. Two kinds of flame retardants were applied on Dancheong specimens and compared with control groups on which distilled water was applied instead of the flame retardants. The flame retardants enhanced the hygroscopic property of the surface of Dancheong. Furthermore, the added flame retardants reacted with oyster shell white($CaCO_3$) and lead red($Pb_3O_4$), producing new chemical compounds like Calcium phosphate tribasic and Lead Phosphates which make the painted layer of Dancheong dissolving and whitening over certain period of time. When applied in excessive amount and exposed in repetitive wet and dry condition, especially, they aggravate the surface problems significantly. These results will provide a good reference on the study of the discoloring/whitening effect of Dancheong layers at many traditional wooden building in Korea.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.100-107
• /
• 2014

Plastic has been widely used in modern artworks' materials due to its merits of process ability and mass production. In the country, value of plastic artifact is increasing but the field of plastic study is limited to industrial purpose. In this study, Identification methods of plastic were performed by SPME-GC/MS and pyrolysis-GC/MS using trace of samples. As a result of identification using SPME-GC/MS, aromatic compounds were identified from polyvinyl chloride. And alkane compounds were identified from polyethylene, and polypropylene. Aromatic compounds were identified from polystyrene, and diethylene glycol appeared in polyurethane based on polyester was identified from polyurethane. As a result of identification using pyrolysis- GC/MS, aliphatic alkenes compounds and phthalate(DEHP) were identified from polyvinyl chloride. Aliphatic alkenes compounds and phthalate(DIBP) were detected from polyethylene. 1-hexene, etc., were detected from polypropylene, aromatic compounds were identified from polystyrene, and methylene diphenyl diisocyanate which is polyurethane basic material was confirmed from polyurethane. This study suggested that non-destructive SPME and pyrolysis-GC/MS are useful to identify compounds particularly polystyrene and polyurethane. These two analytical methods were expected to be applied for identification of unidentified plastic artworks before conservation treatment.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.395-407
• /
• 2014

In this study, firing temperature of bricks from the Songsanri tomb complex is interpreted based on the mineralogical and physical changes of soil samples fired at different temperature. When soil samples were burned at 500 to $1,200^{\circ}C$, phase transition of clay minerals affected the mineralogical composition and microstructure, which leaded to alteration of physical features as color, water absorption and porosity. Mineralogical composition can be assumed to vary with the temperature by mineral phase stability, however, color, water absorption, porosity and microstructure had slow change under $1,000^{\circ}C$, and had rapid change from 1,000 to $1,200^{\circ}C$. Upon the mineral and physical alteration of soil, firing temperature of bricks from the Songsanri tomb complex were estimated. Some bricks were over fired at temperature more than $1,200^{\circ}C$, some high-burned bricks were fired from 1,100 to $1,200^{\circ}C$, some bricks were fired by 900 to $1,000^{\circ}C$ and some bricks ere assumed not to be fired. Henceforward mineralogical and physical study can be applied to interpretate more precise firing temperature.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.143-155
• /
• 2018

In this study, we investigated the properties and manufacturing methods of soil mural finishing layers fabricated using animal glue, starch adhesive(wheat paste), and Dobak glue. We assessed the workability and weatherproofing properties of the earthen plaster and finishing layers fabricated using concentrations of 3%, 5%, 7% and 10% for each adhesive. The results showed that a mixture using 3% or 5% starch adhesive or 3% Dobak glue was suitable for constructing the finishing layer. For finishing layers made with animal glue, earthen plaster had poor workability. It was dry and easily broken as the concentrations of animal glue increased. However, specimens made with low concentrations of animal glue did not exhibit surface deterioration after a freezing-thawing test. Therefore, animal glue mixtures could possibly be used for constructing finishing layers in concentrations lower than 3%. Mixtures containing starch adhesive produced plasters with good workability. Additionally, starch adhesive enhanced compression strength. However, when starch adhesive was mixed at concentrations above 7%, the surface exhibited roughening and staining in freezing-thawing tests. When Dobak glue was used in mixtures, it enhanced compression strength, but concentrations above 5% produced specimens with surface cracking. For concentrations of 3%, there were no cracks and the specimens were stable after freezing-thawing tests, so concentrations below 3% of Dobak glue are suitable for constructing finishing layers. We expect this study will be useful for restoring the traditional technology of soil mural finishing layers and suggest using adhesives to construct the finishing layer.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.21-26
• /
• 2004

Annually repeated flood damage is bringing about the rapid increasement of the loss of human lives and properly, and the enormous social cost for the restoration work is required. The annual amount of flood damage caused by the abnormal climate is reached about 1% of GDP, so more effective management of the flood control operation is needed to prevent the repetitive flood occurred same region. Also, the systematic planning and management or river improvement works are keenly required for the more effective execution of government working budget that expense to recover or to prevent the flood damage. The several organizations of government - Ministry of Construction & Transportation, Ministry of Government Administration and Home Affair, Ministry of Agriculture and Forestry, Ministry of Environment, Ministry of Science & Technology, Korea Meteorological Adminstration and so on - are promoting the flood prevention operations, but those promotion system makes it difficult to maintain the consistency of works. In this study, we try to develop the Web-GIS system prototype that will be able to effectively manage the nationwide river improvement works and to establish a framework that will be able to maintain the consistency of river improvement works. To achieve the study goals, we analysed current system of flood prevention operations, gathered related documents, had interviews with many government employees, and developed the Web-GIS system prototype.