• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.136-143
• /
• 2021

Polyurea has been investigated as a polymer matrix for composite materials because of its high mechanical strength. Although polyurea has a similar chemical structure to polyurethane, it has much higher strength and durability. In this study, the fabrication of polyurea composites reinforced with carbon nanotube (CNT) and graphene oxide (GO) is demonstrated to enhance the tensile strength of the glass fibers composite. Using FTIR and Raman spectroscopies, the chemical structures of polyurea, CNT, and GO are investigated. As a result, spectroscopy analysis reveals that the chemical structure of CNT, GO, and polyurea is maintained during the fabrication of the composite structure. Scanning electron microscopy reveals the uniform distribution of CNT and GO across the polyurea matrix. The reinforcement of 1 wt% CNT in polyurea enhances the tensile strength of CNT/polyurea composites. In contrast, the reinforcement of GO in polyurea induces the degradation of the tensile strength of GO/polyurea composites.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.374-380
• /
• 2010

In order to select excellent cross parents in strawberry breeding, 11 varieties were self-pollinated and tested their progenies. Among the 11 varieties, 'Akihime', 'Maehyang' and 'Seolhyang' showed superior in plant vigor, disease resistance and yield. Combining ability was tested using 15 progenies obtained from crosses between 3 selected varieties as seed parents and 5 varieties as pollen parents. Plant vigor was the strongest when 'Akihime' was used as a seed parent while ripening time tended to the fastest when 'Seolhyang' as a seed parent. Average fruit weight of the crosses 'Seolhyang' ${\times}$ 'Tochiotome', 'Seolhyang' ${\times}$ 'Geumhyang', 'Seolhyang' ${\times}$ 'Wongyo 3111' and 'Akihime' ${\times}$ 'Wongyo 3111' were above 18 g for marketable fruits. Fruit hardness was superior at crosses of 'Maehyang' as a seed parents to other crosses combinations, especially 'Maehyang' ${\times}$ 'Tochiotome'. Soluble solid contents (SSC) was not significantly different among cross combinations. The best cross combination for marketable yield was 'Akihime' ${\times}$ 'Wongyo 3111', followed by 'Seolhyang' ${\times}$ 'Geumhyang', 'Maehyang' ${\times}$ 'Geumhyang', 'Akihime' ${\times}$ 'Tochiotome', in order.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.859-866
• /
• 2019

Cybersecurity attack targeting a specific user is rising in number, even enterprises are trying to strengthen their cybersecurity. Network segmentation environment where public network and private network are separated could block information coming from the outside, however, it is unable to control outside information for business efficiency and productivity. Even if enterprises try to enhance security policies and introduce the network segmentation system and a solution incorporating CDR technology to remove unnecessary data contained in files, it is still exposed to security threats. Therefore, we suggest a system that uses file format conversion to transmit a secure file in the network separation environment. The secure file is converted into an image file from a document, as it reflects attack patterns of inserting malicious code into the document file. Additionally, this paper proposes a system in the environment which functions that a document file can keep information for incident response, considering forensic readiness.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.68-74
• /
• 2019

'Choyoung', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2015. The cultivar 'Choyoung' has the leaves of medium width, long length and green color and a medium grain of brown color. The heading date of the cultivar 'Choyoung' was April 30 which was 2 days earlier than that of check cultivar 'Shinyoung'. Its tolerance or resistance to cold, wet injury, powdery mildew, and leaf rust was similar to those of the check cultivar. But the resistance to the lodging of cultivar 'Choyoung' was stronger than that of the check. The average forage fresh and dry matter yield of cultivar 'Choyoung' at milk-ripe stages were 40.5 and $15.7MT\;ha^{-1}$, respectively, which were similar to those (40.3 and $16.1MT\;ha^{-1}$) of the check cultivar. The silage quality of 'Choyoung' was higher than that of the check cultivar 'Shinyoung' in crude protein content (5.9%), while was similar to the check cultivar 'Shinyoung' in acid detergent fiber (33.9%), neutral detergent fiber (57.3%), and total digestible nutrients (62.2%). It showed a grain yield of $5.59MT\;ha^{-1}$, which was 38% higher than that of the check cultivar 'Shinyoung' ($4.05MT\;ha^{-1}$). This cultivar is recommended for fall sowing forage crops in areas in which average daily minimum mean temperatures in January are higher than $-10^{\circ}C$.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.596-608
• /
• 2018

As urban infrastructure is aging, the possibility of accidents due to the failures or breakdowns of infrastructure increases. Especially, aging underground infrastructures like sewer pipes, waterworks, and subway have a potential to cause an urban ground sink. Urban ground sink is defined just as a local and erratic collapse occurred by underground cavity due to soil erosion or soil loss, which is separated from a sinkhole in soluble bedrock such as limestone. The conventional measurements such as differential settlement gauge, inclinometer or earth pressure gauge have a shortcoming just to provide point measurements with short coverage. Therefore, these methods are not adequate for monitoring of an erratic subsidence caused by underground cavity due to soil erosion or soil loss which occurring at unspecified time and location. Therefore, an alternative technology is required to detect a change of underground physical condition in real time. In this study, the feasibility of a novel magnetic resonance based monitoring method is investigated through laboratory tests, where the changes of path loss (S21) were measured under various testing conditions: media including air, water, and soil, resonant frequency, impedance, and distances between transmitter (TX) and receiver (RX). Theoretically, the transfer characteristic of magnetic field is known to be independent of the density of the medium. However, the results of the test showed the meaningful differences in the path loss (S21) under the different conditions of medium. And it is found that the reflection coefficient showed the more distinct differences over the testing conditions than the path loss. In particular, input reflection coefficient (S11) is more distinguishable than output reflection coefficient (S22).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.7-13
• /
• 2019

This study aims to develop a FE Model to simulate dissimilar friction stir welding and to address its potential for fundamental analysis and practical applications. The FE model is based on Coupled Eulerian-Lagrangian approach. Multiphysics systems are calculated using explicit time integration algorithm, and heat generations by friction and inelastic heat conversion as well as heat transfer through the bottom surface are included. Using the developed model, friction stir welding between an Al6061T6 plate and an AZ61 plate were simulated. Three simulations are carried out varying the welding parameters. The model is capable of predicting the temperature and plastic strain fields and the distribution of void. The simulation results showed that temperature was generally greater in Mg plates and that, as a rotation speed increase, not the maximum temperature of Mg plate increased, but did the temperature of Al plate. In addition, the model could predict flash defects, however, the prediction of void near the welding tool was not satisfactory. Since the model includes the complex physics closely occurring during FSW, the model possibly analyze a lot of phenomena hard to discovered by experiments. However, practical applications may be limited due to huge simulation time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.327-333
• /
• 2019

For sustainable lunar exploration, the most required resources should be procured on site because it takes tremendous cost to transfer the resources from the Earth to the Moon. The technologies required for use of lunar resources refers to In-Situ Resource Utilization (ISRU). As the ISRU technology cannot be verified in the Earth, a lunar surface environment simulator is necessary to be prepared in advance. The Moon has no atmosphere, and the average temperature of the lunar surface reaches to $107^{\circ}C$ during the daytime and $-153^{\circ}C$ at night. The lunar surface is also covered with very fine soils with sharp particles that are electrostatically charged by solar radiation and solar wind. In this research, generation of vacuum environment with lunar soil mass in a chamber and simulation of electrostatically charged soils are taken into consideration. It was successful to make a vacuum environment of a chamber including lunar soils without soil disturbance by controlling evacuation rate of a vacuum chamber. And an experiment procedure for simulating the charged lunar soil was suggested by theoretical consideration in charging phenomena on lunar dust.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.528-534
• /
• 2019

This study analyzes the factors affecting China's carbon emissions from 1985 to 2016. In recent years, the whole industries of China are in the midst of industrialization and have several problems. Now, the low-carbon economy has become the main task of China's economic development. This study analyzes the factors affecting China 's carbon emissions by selecting relevant data onto the Chinese yearbook and using a time series model. The analysis shows that related industries continue to innovate and increase the use of green energy such as electricity, but coal is still the largest share of the energy consumed. As energy use efficiency increases and industrial R&D investment increases year by year, carbon emissions are increasing every year. In addition, there is a stereotype that industry is the biggest factor affecting carbon emissions. The research found that the impact of the industry on China's carbon emissions is declining gradually. While controlling industrial carbon emissions, keeping continue to improve technology development and focusing on carbon emissions from other industries are critical to reduce overall carbon emissions. Based on the empirical results, if we can change stereotypes starting from the nature of the data, we will quickly reach a low carbon sustainable development economy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.568-578
• /
• 2021

Patents that are research results from industry-university cooperation (IUC) are a source of innovation, and play an important role in economic growth, such as technology transfer and commercialization. For this reason, there are many efforts to revitalize IUC, but in general, company patents are achievements that can be commercialized, rather than research achievements, so not all patents are used for business, even after their creation as the outcome of IUC. Therefore, this research supports the design of measures in which IUC can ultimately be linked to successful utilization of patents by identifying the purposes of IUC, even after it has been successfully promoted, and patents have been filed as a result. To this end, first, the patents registered for industry-academia cooperation in the United States are collected, and second, a predictive model is designed, with unexpired and expired patents predicted using machine learning techniques. The final identified patents are intended to derive available factors in terms of marketability and technicality. This study is expected to help predict the utilization of unexpired and expired patents, and is expected to contribute to setting goals for research results from technical cooperation between corporate and university officials planning early IUC.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.4
• /
• pp.20-28
• /
• 2021

The Domestic Construction Industry is in the process of changing from a one-sided production method centered on the contractor to a production method in which the order and the contractor can collaborate. Depending on the delivery method, the bid/success method, the contract method, and the degree of business involvement of the order may also vary. In this thesis, in order to introduce 'Construction Management at Risk' suitable for the domestic environment, domestic and foreign institutional analysis, bid process analysis, contract fulfillment and management analysis, post management analysis, and related laws and regulations for legalization In order to suggest a plan for the efficient operation of the system, a system and case analysis of domestic and international construction responsibility type construction project management was conducted. 'Construction Responsible Construction Project Management' defined in the Framework Act on the Construction Industry is divided into the main contract transfer contract, which is a service contract performing pre-con work, and the main contract, which is construction project management and construction contract. Therefore 'Construction Management at Risk' should be regarded as one of the ordering methods rather than a successful bid system, as in the case of overseas, and legalization as a bidding system equivalent to design/construction batch bid and technology proposal is necessary for introduction. In order to introduce 'Construction Management at Risk' suitable for the domestic environment, domestic and foreign institutional analysis, bidding process analysis, contract fulfillment and management analysis, and follow-up management analysis are conducted. A method for efficient operation was suggested so that it can be applied in the domestic market while maintaining the original merits of this system.