• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1189-1202
• /
• 2016

This paper describes an application of wavelet analysis for damage detection of a steel frame structure with bolted connections. The wavelet coefficients of the acceleration response for the healthy and loosened connection structure were calculated at each measurement point. The difference of the wavelet coefficients of the response of the healthy and loosened connection structure is selected as an indicator of the damage. At each node of structure the norm of the difference of the wavelet coefficients matrix is then calculated. The point for which the norm has the higher value is a candidate for location of the damage. The above procedure was experimentally verified on a laboratory-scale 2-meter-long steel frame. The structure consists of 11 steel beams forming a four-bay frame, which is subjected to impact loads using a modal hammer. The accelerations are measured at 20 different locations on the frame, including joints and beam elements. Two states of the structure are considered: healthy and damaged one. The damage is introduced by means of loosening two out of three bolts at one of the frame connections. Calculating the norm of the difference of the wavelet coefficients matrix at each node the higher value was found to be at the same location where the bolts were loosened. The presented experiment showed the effectiveness of the wavelet approach to damage detection of frame structures assembled using bolted connections.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.125-136
• /
• 2016

The external R&D, which includes the adoption of the external technology and knowledge in addition to the internal R&D, is one of important factors for the innovation. Especially for small and medium-sized enterprises (SMEs), the external R&D has been considered as a key factor to carry out the innovation more efficiently due to the limitations of their resources and capacities. However, most of extant studies related to external R&D have focused on analyzing the influence of external R&D on innovation outputs or outcomes. Only a few studies have explored the impact of external R&D on the innovation efficiency. This study therefore investigates whether the external R&D effects the industry's innovation efficiency and productivity. On this study, we used Korean manufacturing industry data of SMEs from 2012 to 2014 and employed a global Malmquist productivity analysis technique, which is based on the Data Envelopment Analysis (DEA), to assess the innovation efficiency and productivity. Innovation performances of external R&D group and internal R&D group are compared. Then, the sectoral patterns of both innovation efficiency and productivity are analyzed with respect to the technological intensity, which is introduced by OECD. The results show that the gap of innovation efficiency between external and internal R&D groups has gradually decreased because of the continuous improvement of the external R&D group's performance, while the external R&D group lag behind the internal R&D group. In addition, patterns of the innovation efficiency and productivity change were different depending on the technological intensity, which means that the higher the technological intensity, the greater the effect of external R&D.

• Environmental and Resource Economics Review
• /
• v.24 no.2
• /
• pp.411-433
• /
• 2015

This paper decomposed energy productivity changes across 14 Korean manufacturing industries into 5 components, technological catch-up(EC), technological progress(TC), and changes in labor-energy ratio(LC), capital-energy ratio(KC) and energy mix(EMC). Then we also figured out the possible relationship between energy productivity change and export growth rate across the industries. It is found that (1) technological progress, changes in capital-energy ratio and energy mix contribute to energy productivity growth in Korea during the sample period, (2) technological progress is the primary driving forces for energy productivity growth, (3) increase in export growth rate had a positive impact on energy productivity growth excepting a part of energy-intensive industries.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.65-100
• /
• 2014

We tried to find out the technological innovation properties of the National Research and Development Projects (NRDPs) through scientometric analysis of patent data generated by the NRDPs. The distribution of technology groups in patent data shows that NRDPs are highly focused on the Information Technology(IT) group. The Relative Cites Index(RCI) analysis implies that the Biotechnology(BT) group will emerge in the future. The Relative Family Indices(RFIs) are high among the high technological impact groups such as BT and IT. We defined new measures related with technological convergence and collaborativenessopenness relations among R&D agents. Using network analysis techniques, we analysed the absorption-derivation relations among technology groups and the opennesscollaborativeness relations among R&D agents. Recently, both the share of hetero-plural technology groups and the collaboration among different R&D agents are increasing.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.135-140
• /
• 2008

Recently in the Mongolian wireless marketplace, many E-commerce companies have been making considerable investments in the technological development of M-commerce, taking competitive advantage of new business possibilities offered by Internet-based wireless technologies. In the Mongolian wireless marketplace, this new mobile environment opens the door for new and exciting market opportunities in mobile services and applications. In the near future, these companies will be looking toward M-commerce services as a supplemental source of revenue in the mobile marketplace. This paper examines the roles of M-commerce in the consumers' in order to promote the consumers' loyalty in the booming M-commerce. This paper contains theory that focuses on the basic concepts of the M-commerce environment, its wireless network technologies, and its applications infrastructure. Upon searching for references to assist us in establishing a market hypothesis, we discovered that few comprehensive studies on consumer perspective and behavior related to M-commerce services actually exist in the literature. In the area of M-commerce, many companies neglect the consumer perspective, concentrating only on technological factors only when formulating their market strategies. And, due to technological blindness, many companies were not able to succeed in end-user E-commerce services. Given that fact, this paper formulates a consumer-centric research model. In order to prove the research model, we chose the survey method which allows for the collection of large amounts of data from a sizeable population in a highly economical way. Through the survey, this paper defines consumer's attitudes towards M-commerce services by identifying potential Business-to-Commerce(B2C) applications and its primary target groups in terms of gender and age, and by investigating whether consumers recognize the value proposition of M-commerce applications and services. As shown in the data analysis and results, this research concludes that M-commerce development in Mongolia is still at its infancy, and that the implementation of M-commerce depends not only on technological progress, but also on consumer attitudes and their willingness to adopt M-commerce services. As well, other complex cross-cultural factors-socially, economically, culturally, et cetera-enter strongly into the equation.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.1-12
• /
• 2015

The current scenario of the transportation sector reflects the urgent need to address issues such as depletion of traditional fuel reserves and ever growing pollution levels. Researchers around the world are focussing on alternatives as well as optimisation of currently employed devices to reduce the pollution levels generated by the commonly used fuels. One such optimisation involves the study of air flow within the intake manifolds of SI engines. It is a well-known fact that alterations in the air manifolds of engines have a significant impact on the engine performance parameters, fuel consumption and emission levels. Previous works have demonstrated the impacts of runner lengths, diameter, plenum volume, taper angle of distribution manifolds and other factors on in-cylinder fluid motion and engine performance. However, a static setup provides an optimal configuration only at a specific engine speed. This paper aims to investigate the variations in the same parameters on a four stroke, naturally aspirated single cylinder SI engine through varying the cross section design over the intake runner with the aid of Computational Fluid Dynamics. The system consists of segments that form the intake runner with projections on the inside that allow various permutations of the intake runner segments. The various configurations provide the optimised fluid flow characteristics within the intake manifold at specific engine speed intervals. The variations such as turbulence, air fuel mixing are analysed using the three dimensional CFD software FLUENT. The results can be used further for developing an automated or manually adjustable intake manifold.

• Korean small business review
• /
• v.41 no.3
• /
• pp.1-22
• /
• 2019

The purpose of this research was to investigate the impact of the partner types (supplier, customer, competitor, research institution, more than one partner type) for SMEs on radical and incremental innovation. Another purpose was to examine how the relation varies according to the technological intensity of an industry to which the focal firm belongs. To test the hypotheses, we used the 'KIS(Korean Innovation Survey) 2014' data and the empirical analysis was done with the effective survey from 3,846 Korean SMEs. We employed STATA 14 for validity, confirmatory factor analysis, and binary logistic regression analysis. The results revealed that, when viewed the entire manufacturing SMEs, cooperation with suppliers, customers and research institutes has all been shown to have a positive effect on the radical and gradual innovations of SMEs. However, The relationship between partner type and radical innovation has been significantly different depending on the technical intensity of the industry. When cooperating with suppliers, the impact on radical innovation of SMEs was significant only in low-tech and medium-low tech industries. In contrast, when working with customers, the impact on the radical innovation of SMEs was significant only in the high-tech, medium-high tech, and medium-low tech industries, except for low tech industries. Meanwhile, although cooperation with competitors has a positive effect on radical innovation, this has been only significant in the medium-high tech industries.

• International Area Studies Review
• /
• v.15 no.1
• /
• pp.469-493
• /
• 2011

This paper attempts to examine the economic impact of technological barrier to trade(TBT) between Korea and China by using international input-output approach. With the tariff/quota reduced or eliminated since WTO's launch, the interest in TBT as a non-tariff barrier has been increased, and then there have so far been a large number of empirical studies on quantifying its effect in foreign. But still this area of study in Korea is limited in the literature survey. In encouraged in this situation, focusing on bilateral trade between Korea and China, which has been significantly increased in recent years, we have tried to estimates the impact of TBT on their output and employment. We use Asian International Input-Output Table(AIIO) for the year 2000 published by IDE-JETRO, and also use the estimated sectoral TBT provided by Ha et al.(2010). According to the result, there will be generated $3.63 billions values in outputs, and 18.1 millions persons in employments at most. And also we found that there is weak interdependence in sectoral and spatial linkage between two countries.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.203-226
• /
• 2007

The purpose of this research is to analyze the impact of business scope and technological innovation capability(TIC) on firm performance in SMEs. Among the 1,077 SME sample data collected with the help of Korean Industrial Complex Corporation, 228 sample data from capital goods sectors had been selected and analyzed. Several mutiple regression models were developed to test the main and the interaction effects of two independent variables business scope and TIC on SME performance. The empirical analysis show that the number of product lines, one of the two scope variable measured, is positively correlated with the return on sales(ROS). Among the variable of TIC, the number of intellectual property rights(IPRs) is positively correlated with the sales growth rates of SMEs, which the ratio of engineers to total employees is positively correlated with the ROS of SMEs. The results also delineated some interaction effects of business scope and TIC on SME performance. There exists a positive interaction effect of the ratio of engineers to total employees and the number of product lines both on ROS and scales growth rate. The interaction of the number of customers and the number of IPRs positively effects on ROS, and also the interaction of the number of product lines and the number of IPRs are positively related with ROS. Findings of this research indicates that it is necessary for SMEs in capital goods sectors to accumulate technological innovation capability and to expand business scope to improve firm performance. Furthermore, the accumulation of internal TIC should accommodate with the expansion of business scope to gain an improved performance. Particularly, adequate technological innovation capability is required to address the need of expanded customers when enlarging the scope of customers.

• Journal of Korea Port Economic Association
• /
• v.38 no.4
• /
• pp.45-64
• /
• 2022

Due to the recent and rapid globalization, logistics outsourcing has expanded globally and is seen as a means of creating a robust logistics system. However, many businesses continue to have difficulties with their logistics outsourcing contracts, which compels them to reinstate the logistics function for internal management. This study aims to investigate how organizational capabilities of logistics service providers (LSPs), notably flexibility, integration, innovation, and technological capabilities, impact on the logistics outsourcing success in Ugandan food processing firms. Using a structured questionnaire survey, cross-sectional data collected from 211 food processing firms in Kampala - Uganda were analyzed by partial least squares-structural equation modeling (PLS-SEM) using SmartPLS 3.3.7 software to examine the theorized relationships. The study findings revealed that whereas the technological and innovation capabilities positively and significantly influence logistics outsourcing success, the effects of flexibility and integration capabilities were insignificant. Additionally, the importance-performance map analysis (IPMA) reveals that the technological capability is a priority capability, followed by the innovation capability if logistics outsourcing success is to be achieved. Conversely, flexibility and integration capabilities are of low priority.