• 제목/요약/키워드: Technical Writing

검색결과 95건 처리시간 0.028초

공과대학생의 '말하기 능력'에 대한 인식과 평가 (Engineering Students' Perception of Speaking Ability and Their Communicative Competence Assessment)

  • 황순희
    • 공학교육연구
    • /
    • 제22권3호
    • /
    • pp.18-31
    • /
    • 2019
  • In addition to technical skills and competencies, communication competence has been identified to be important to engineering students who will be drivers of innovation in a rapidly changing society. Drawing on the previous studies, this research examines the results of an empirical exploration of engineering students' perception of speaking ability and their communicative competence. To date, there has been most of the research conducted on 'writing' (e.g., its educational process, class designs, ability, etc.) for engineering students. However, relatively little attention has been paid to engineering students' speaking ability perception and their competence diagnosis. This study relies on quantitative data obtained from one survey questionnaire and one test conducted respectively. The sample consists of 386 engineering students as well as 481 non-engineering students for the 1st survey. And to measure communicative competence, 150 engineering students as well as 136 non-engineering students participated in the test. Our findings show that firstly, there were significant differences in perception of speaking ability by majors and gender. Whereas there was no difference in the same survey by grade. Secondly, there was a close and significant relationship between sub-factors of speaking ability. Thirdly, there were significant differences in communicative competence by majors. Whereas there was no difference by gender and grade. Fourthly, there was a close and significant relationship between sub-factors of communicative competence. These findings are expected to provide an explanation for the improvement on engineering students' speaking ability and to encourage the participation in extra-curricular activities and programs in engineering school.

2018 심방세동 카테터 절제술 대한민국 진료지침: Part II

  • 유희태;정동섭;박희남;박형섭;김주연;김준;이정명;김기훈;윤남식;노승영;오용석;조영진;심재민
    • International Journal of Arrhythmia
    • /
    • 제19권3호
    • /
    • pp.235-284
    • /
    • 2018
  • In this part the writing group will cover strategies, techniques, and endpoints of atrial fibrillation (AF) ablation. Prior to all, electrical isolation of the pulmonary veins is recommended during all AF ablation procedures. In addition, techniques to be used for ablation of persistent and long-standing persistent AF, adjunctive ablation strategies, nonablative strategies to improve outcomes of AF ablation, and endpoints for ablation of paroxysmal, persistent, and long-standing persistent AF will be reviewed. Currently many technologies and tools are employed for AF ablation procedures. Radiofrequency energy, cryoablation, and other energy sources and tools are in various stages of development and/or clinical investigation. Finally, anticoagulation strategies pre-, during, and postcatheter ablation of AF and technical aspects of ablation to maximize safety are discussed in this section.

건설분쟁 중재제도의 차별화 및 개선방안에 관한 연구 (A Study on Differentiation and Improvement in Arbitration Systems in Construction Disputes)

  • 이선재
    • 한국중재학회지:중재연구
    • /
    • 제29권2호
    • /
    • pp.239-282
    • /
    • 2019
  • The importance of ADR(Alternative Dispute Resolution), which has the advantage of expertise, speed and neutrality due to the increase of arbitration cases due to domestic and foreign construction disputes, has emerged. Therefore, in order for the nation's arbitration system and the arbitration Organization to jump into the ranks of advanced international mediators, it is necessary to research the characteristics and advantages of these arbitration Organization through a study of prior domestic and foreign research and operation of international arbitration Organization. As a problem, First, education for the efficient promotion of arbitrators (compulsory education, maintenance education, specialized education, seminars, etc.). second, The effectiveness of arbitration in resolving construction disputes (hearing methods, composition of the tribunal, and speed). third, The issue of flexibility and diversity of arbitration solutions (the real problem of methodologies such as mediation and arbitration) needs to be drawn on the Arbitration laws and practical problems, such as laws, rules and guidelines. Therefore, Identify the problems presented in the preceding literature and diagnosis of the defects and problems of the KCAB by drawing features and benefits from the arbitration system operated by the international arbitration Institution. As an improvement, the results of an empirical analysis are derived for "arbitrator" simultaneously through a recognition survey. As a method of improvement, First, as an optimal combination of arbitration hearing and judgment in the settlement of construction disputes,(to improve speed). (1) A plan to improve the composition of the audit department according to the complexity, specificity, and magnification of the arbitration cases - (1)Methods to cope with the increased role of the non-lawyer(Specialist, technical expert). (2)Securing technical mediators for each specialized expert according to the large and special corporation arbitration cases. (2) Improving the method of writing by area of the arbitration guidelines, second, Introduction of the intensive hearing system for psychological efficiency and the institutional improvement plan (1) Problems of optimizing the arbitration decision hearing procedure and resolution of arbitration, and (2) Problems of the management of technical arbitrators of arbitration tribunals. (1)A plan to expand hearing work of technical arbitrator(Review on the introduction of the Assistant System as a member of the arbitration tribunals). (2)Improved use of alternative appraisers by tribunals(cost analysis and utilization of the specialized institution for calculating construction costs), Direct management of technical arbitrators : A Study on the Improvement of the Assessment Reliability of the Appraisal and the Appraisal Period. third, Improvement of expert committee system and new method, (1) Creating a non-executive technical committee : Special technology affairs, etc.(Major, supports pre-qualification of special events and coordinating work between parties). (2) Expanding the standing committee.(Added expert technicians : important, special, large affairs / pre-consultations, pre-coordination and mediation-arbitration). This has been shown to be an improvement. In addition, institutional differentiation to enhance the flexibility and diversity of arbitration. In addition, as an institutional differentiation to enhance the flexibility and diversity of arbitration, First, The options for "Med-Arb", "Arb-Med" and "Arb-Med-Arb" are selected. second, By revising the Agreement Act [Article 28, 2 (Agreement on Dispute Resolution)], which is to be amended by the National Parties, the revision of the arbitration settlement clause under the Act, to expand the method to resolve arbitration. third, 2017.6.28. Measures to strengthen the status role and activities of expert technical arbitrators under enforcement, such as the Act on Promotion of Interestments Industry and the Information of Enforcement Decree. Fourth, a measure to increase the role of expert technical Arbitrators by enacting laws on the promotion of the arbitration industry is needed. Especially, the establishment of the Act on Promotion of Intermediation Industry should be established as an international arbitration agency for the arbitration system. Therefore, it proposes a study of improvement and differentiation measures in the details and a policy, legal and institutional improvement and legislation.

치과용엑스선장치의 기술문서 작성을 위한 가이드라인 개발 연구 (A Study on Development of Guideline on Writing Technical Document for Electrical Medical Devices: Dental X-ray Equipment)

  • 이승열;김재량;이준호;박창원
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제39권4호
    • /
    • pp.651-660
    • /
    • 2016
  • 최근 인구고령화로 인하여 치과진료 주요대상인 노인층의 검사가 꾸준히 증가하고 있다. 따라서 치과 진단용 엑스선장치 시장도 꾸준히 성장하고 있으며, 동시에 치과용엑스선장치의 허가 심사건수도 증가하고 있다. 의료기기 기술문서는 의료기기의 허가 심사 시 필수로 요구되는 자료이며, 해당 의료기기의 전반적인 항목을 기술해야 하는 만큼 작성자의 업무 이해도 및 전문성이 필요하다. 그러나 국내 의료기기 제조 수입 업체 대부분이 영세하여 의료기기 인 허가 관련 전문 인력의 확보가 쉽지 않아, 이로 인한 기술문서의 부정확한 작성이 증가하고 있다. 이에 따른 심사자의 민원 처리 지연과, 제품의 신속한 시장 진입의 어려움이 발생되고 있다. 특히 치과용구강외엑스선장치, 치과용구강내엑스선장치, 암형전산화단층엑스선촬영장치, 포터블엑스선 촬영장치(이하 치과용엑스선장치)는 식품의약품안전처 기준 규격이 최근에 제정되거나 부재한 품목으로, 의료기기 제조 수입업체에서 시험항목 설정 시 많은 어려움을 겪고 있기에, 개선된 규격이 반영된 치과용엑스선 장치 가이드라인(안)을 개발하여 관련 업체 및 심사자에게 도움을 주고자 한다. 본 연구를 위하여 첫째, 기술문서에 대한 개선된 제도 운영 조사 및 의료기기의 제도 적용에 따른 문서 작성 방법을 검토하였으며, 둘째, 품목별 시장현황을 조사하고, 국내 외 규격을 분석하였으며, 셋째, 기 허가된 제품의 기술문서를 분석하여 품목별 올바른 작성방법과 국제조화된 시험항목, 기준 및 방법을 도출하였다. 마지막으로, 산 연 관 전문가 협의체 회의를 통하여, 공정하고 전문성이 강화된 기술문서 작성 가이드라인(안)을 도출하였다.

치과보철기공물 제작실태에 관한 조사연구 (A SURVER OF THE ACTUAL CONDITIONS ON THE PRODUCTION OF DENTAL PROSTHESIS)

  • 배정수;정문규
    • 대한치과보철학회지
    • /
    • 제33권2호
    • /
    • pp.358-394
    • /
    • 1995
  • The author studied the actual conditions on the production of dental prosthesis made in laboratories, and also studied interrelationships between dentists and laboratory technicians in both personal and technical aspects. Two hundred-eighty four technicians, work in dental laboratories presently, were surveyed via mail and direct contact during the period from June 1 to June 30 and August 27 to August 28 in 1994 respectively. The obtained results were as follows : 1. Among the respondents, 90.5% we re working in commercial dental laboratories and their laboratories were mainly located in the Seoul area(40.9%, P<0.05). The numbers of employees in these laboratories were less than 10 persons(70.0%, P<0.01), and 75.9% of these laboratories have been in operation less than 15 years. 2. Most laboratory procedures were accomplished according to established disciplines. However, procedures such as die trimming in fixed restorations and the qualifications of the people designing removable partial dentures were not. Other problem areas were boxing of the working cast, the person determining the posterior palatal seal area, selection and arrangement of artificial teeth, occlusion rim correction and laboratory remounting of the processed denture in complete denture restorations. 3. Only half of the requesting dentists could send work authorizations to the laboratories with their work and even so, its contents were quite lacking. Consequently, there must be some standards in writing work authorization. 4. Technicians most desired clean and accurate impressions in fixed and removable dentures, and enough tooth reduction in porcelain fused to metal restorations. 5. For the establishment of better relationships between dentist and dental technician, the respondents desired the establishment of equal footing first(33.5%), and frequent conversations and muture understanding second(25.9%).

  • PDF

개화기 과학 교육자의 배경과 역할 (The Backgrounds and Roles of the Science Educators during the Enlightenment Period of Korea)

  • 박종석;정병훈
    • 한국과학교육학회지
    • /
    • 제20권3호
    • /
    • pp.443-454
    • /
    • 2000
  • 개화기 과학교과서의 편저자들을 당시 과학교육의 도입과 활동에 있어서 일정한 역할을 담당했던 사람들로서 그들의 배경과 역할을 연구하여 한국 과학교육의 정착 과정을 논의하였다. 당시 출판된 과학교과서의 편저자들 중 한국인은 38명에 이르고, 대한제국 관원 이력서나 학회지를 통해서 그들 중 12명의 배경을 알아냈으며, 교과용도서일람과 학회지로부터 그들의 활동 내용을 밝혀냈다. 7명은 일본에서 유학하였고, 5명은 국내에서 전문 교육을 받았다. 4명이 과학교육과 관련된 자연분야를 일본에서 전공하였다. 이들은 활동 초기 학회지 등에 과학이나 전문 학문 분야에 관련된 기사를 게재하였고, 이를 바탕으로 과학 교과서나 일반 교과서를 편술 또는 저술하였다. 그러나 그들의 역할은 1910년대부터 점차 활동의 비중이 커진 일본인 교사들로 대체되며, 그들 자신도 전문적 학술 훈련을 받은 집단이 아니라 기술과 관련된 전문학교 수준의 응용과학을 배웠다는 점에서 독자적인 과학교육을 실시하는 데는 학문적으로나 교육적으로 일정한 한계를 지니고 있었다.

  • PDF

「임원경제지(林園經濟志)」에 나타난 정원조영 연구 - 「이운지(怡雲志)」와 「상택지(相宅志)」를 중심으로 - (A Study on Garden Construction in 「ImwonGyeongjeji」 - focusing on the 「Yiwunji」 and 「Sangtackji」 -)

  • 김규섭;이재근
    • 한국전통조경학회지
    • /
    • 제32권1호
    • /
    • pp.22-30
    • /
    • 2014
  • "임원경제지"는 동아시아 그리고 세계적으로도 유래가 없는 백과사전으로 가치를 인정받고 있으나, 다양하게 취급되어진 분야 및 방대한 내용면에서만 평가가 이루어졌다. 또한"임원경제지"관련한 대부분의 학술연구도 편찬시기의 정세(政勢)인 농업에만 초점을 맞춰 연구가 진행되어 단순한 농서(農書)의 개념으로 해석하여 왔다. 이에 본 연구는 19세기 조선시대 서유구에 의해 편찬된 것으로 알려진"임원경제지"영인본의 조경관련 내용 중 임원조영이론과 조영맥락을 분석하고,"임원경제지"에 기술된 전통조경의 원리 및 기법에 주목하여 한국의 전통조경 작정서로서의 가치를 조경학적 관점에서 파악하였다."임원경제지"의 분석한 결과 '조경요소에 대한 전문성', '구성 체계의 우수성', '우리나라 현실에 적합한 토착성', '저작을 위한 환경요인의 우수한 가치 제고' 면에서 다른 동양 주변국의 유사 조경서들과 견주어도 한국의 대표 '조경기술서'로서 가치와 위상을 충분히 갖추고 있다는 사실에서 그 중요성을 발견할 수 있었다.

반도체장비유지보수 자격개발에 관한 연구 (A Study on the Development of Qualification for Semiconductor Machine Maintenance)

  • 강석주
    • 한국산학기술학회논문지
    • /
    • 제13권6호
    • /
    • pp.2472-2478
    • /
    • 2012
  • 본 연구는 반도체 산업에서 반도체장비 유지보수에 사용되어지는 반도체장비 유지보수 분야의 전문기술인력을 효과적으로 양성할 수 있는 반도체장비 유지보수의 자격종목을 개발하고자 하는데 그 목적이 있다. 연구의 목적을 달성하기 위하여 반도체장비 유지보수 분야의 국내외 실태 조사, 문헌조사를 통하여 반도체장비 유지보수 관련 교육훈련기관 및 검정 수요 예상 인력을 파악했으며, 유사자격제도(전자부품장착기능사, 전자부품장착산업기사, 생산자동화기능사, 생산자동화산업기사)를 분석하였고, 직무분석을 통하여 반도체장비유지보수기능사의 직무 및 교육내용을 분석하였다. 또한 반도체장비 유지보수 자격종목 신설에 대한 설문조사를 실시했으며, 반도체장비유지보수기능사 자격종목의 출제기준 및 채점 방법을 제시했고, 필기시험과 실기시험에 대한 모의 검정시험도 실시하였다. 이러한 결과를 토대로 반도체장비유지보수기능사에 대한 교육프로그램을 만들었으며, 자격검정을 실시할 수 있는 출제기준을 제시하였다.

학생들의 인식조사를 통한 온라인 물리탐구토론의 특징 (Characteristics of Online Discussion System for Physics Investigation Through the Students' Perceptions)

  • 이봉우;김희경
    • 한국과학교육학회지
    • /
    • 제24권6호
    • /
    • pp.1206-1215
    • /
    • 2004
  • 본 연구에서는 오프라인과 온라인으로 진행된 물리탐구 토론에 참여한 학생들을 대상으로 실시된 설문과 면담을 통하여 온라인 물리탐구토론 학습체제에 대한 학생들의 인식을 알아보고, 이를 통하여 온라인 물리탐구토론 학습 체제의 특징을 알아보았다. 분석은 온라인 물리탐구토론 학습체제의 사용자 편리상 온라인 탐구토론의 비동시성, 글쓰기와 관련된 온라인 탐구토론, 온라인 탐구토론의 시각적 표현과 물리적 존재감, 온라인 탐구토론의 선호도의 다섯 가지 범주로 실시되었다. 학생들은 온라인 탐구토론에서 시공간을 초월하여 접근할 수 있고, 비동시성으로 인하여 충분한 사고 후에 논쟁에 참여할 수 있다는 점을 온라인 탐구토론의 가장 큰 장점으로 여기고 있었다. 또한 온라인 활동이 학생들 스스로의 참여로 수행되지만, 학생들의 활발한 참여를 위해서는 온라인 교육 시스템의 기술적인 부분이외에도 학부모와 교사의 역할이 더없이 중요하다.

문제중심학습과 신업체 현장실습 연계를 통한 효과적인 PLM 교육에 관한 연구 (A Study on the Problem-Based Learning with Industry Co-operative Program for Effective PLM Education)

  • 채수진;노상도
    • 한국CDE학회논문집
    • /
    • 제13권5호
    • /
    • pp.362-371
    • /
    • 2008
  • Generally, a PLM education program in university consists of lectures of theory, software lab and software development raining as an advanced subject. Most industries want more than these, such as practical problem solving capabilities, teamwork skills and engineering communications including human relationship, rhetoric, technical writing, presentation and etc. Problem-Based Learning is a problem-stimulated and student-centered teaming method, and an innovative education strategy for collaborative and self-directed learning by applying real world problems. Education paradigm changes from "teaching" to "learning" accomplished by team working, and students are encouraged to develop, present, explain and defense their ideas, suggestions or solutions of a problem, and the "cooperative teaming" proceeds spontaneously during team operations. Co-operative education program is an into-grated academic model and a structured educational program combining classroom learning with productive work experience in a field related to a student's academic or career goals. Based on the partnership between academic institutions and industries, students are engaged in real and productive "work" in the industry, in contrast with merely observing. In this paper, PBL with Co-op program is suggested as an effective approach for PLM education, and we made and operated a PBL-based education course with industry co-op program. The Co-op education in industry accompanied with the PBL course in university can improve practical problem solving capabilities of students, including modeling and management of P3R(Product, Process, resource and Plant) using commercial PLM software tools. By the result, we found this to be an effective strategy for helping students, professors and industries succeed in engineering education, especially PLM area.