• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.371-379
• /
• 2005

This article studied the motivational factor of participation skill competition and their effectiveness. This study was restricted to cooks within those who had participated in a cooking contest to allow measurement of participation and satisfaction. This thesis investigated 116 cooks by questionnaires from April 6, 2005 to April 23, 2005, of which 106 responses were used for statistical processing to perform this study First, from the motive of participation, 13 variables were analyzed into 3 factors such as the factor of social recognition, the factor of speciality, and the factor of self-development and self-realization. The factor as a motive of participating in skill competition has a significant effect on effectiveness. A total of three factors were extracted from Recognition consisting of 10 variables. Each factor was labeled as awareness of the competition, revision of test questions, and selection of the judges of the competition. Second, three factors were derived from 12 variables in association with the effect of the contest, including factors of contribution to industry development, technical and technological effect, and psychological effect. In addition, it was revealed that the motive of participating in skill competition had an significant impact on recognition. Third, the results of regression analysis demonstrated that factors relating to recognition of skill competition and participation motives significantly influence on the effect of the contest. One limitation of this study is that the Population of the survey was limited to those who had Participated in the contest. Thus, the findings of this study may not be generalizable for other cases. It is clear that further research is needed to collect more in-dept data from other similar competitions in an effort to extend the application of the present results to other studies.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.9-16
• /
• 2009

Chemical products have had an favorable influence on our everyday life, and contributed very much to the development of human culture. According to the rapid change of industry and the development of scientific technique the using chemical products are increasing more and more. Chemical products can have any hazardous property such as flammability or explosiveness. There are occurring many accidents in the international trade due to the different classification and labelling of chemicals produced in various countries. The main purpose of this work is the development of global standard test methods for the chemicals, and the classification and labelling in building block approach by means of the basic technical data. Oxidizing solids, combustible solids, spontaneously combustible materials, water-prohibitive materials, flammable liquids, self-reactive materials and oxidizing liquids have been classification The first Experiment have tested Oxidizing solids of third five. The results have been classified according to the hazard material safety regulation and the UN regulation, and summarized in a data-base.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.1
• /
• pp.245-272
• /
• 2014

This study aims to explore the present and future of agricultural extension system in Uganda. Though Uganda has used many approaches in its agricultural extension, very little has been registered in farm productivity and profitability. Too many reforms some of them some are top-down while others are bottom - up. In most cases these reforms may not be given a chance to develop to show their impact. Future success of agricultural extension and rural development efforts in Uganda will depend not only on the presence of technical expertise and availability of resources but also on each government's willingness to redefine the role of its institutions and to allow the active participation of rural people in formulating and implementing and agricultural extension and rural development programs. As result the public extension systems in Uganda needs to be demand-driven so to make it relevant and important to the beneficiary.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.171-180
• /
• 2014

This study is about effects of government R&D subsidies program participation factor for SMEs R&D performances. Currently, Government R&D subsidies program has been operating in various forms, and each company subsidies, facilities, equipment, personnel and training have been supported. Each of the companies is also involved with various factor of support to participate in the subsides program. Therefore, This study verifies the hypotheses that after government R&D subsidies program of project implementation, various participation factor of companies have an effect positive impact on business management skills of administrative performance. Also, This study verifies the hypothesis of an influence on the R&D investment and the technological capability of technical performance. Through such a analysis results will help to carry out guide for strategic R&D performance management of government R&D subsidies program participation companies.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.82-87
• /
• 2017

Recent trends in shipbuilding and offshore industries are a huge increase in the ship size and the exploration and production of oil and natural gas in the arctic offshore region. High performance steel plates are required by these industrial trends. Also in IMO(International Maritime Organization) has begun to regulate of fuel of ship to environmental protection, therefore it is little bit difficult to use bunker-C oil to working ship. As the problem of environmental change such as global warming is emerged, the operation of the ship is considered to be involved in the environmental change problem, and the regulation of environmental pollution is gradually strengthened. As these environmental regulations are strengthened demand for LNG fuel ships is rapidly increasing. Currently, cryogenic steels used in LNG tanks include aluminum alloy, SUS 304, and 9%-Ni steel. Those steels are has high cost to construction of large LNG carrier. The new materials were suggested several steel mills to decrease construction cost and easy construction. The new cryogenic steel should be evaluate safety to applied real structure include LNG ship. Therefore, in this study, fracture toughness of weld joints were investigated with cryogenic steel for application of LNG tank.

• KIEAE Journal
• /
• v.3 no.3
• /
• pp.11-18
• /
• 2003

The purpose of this study was to find out awareness of the environment-friendly planning elements for residential unit space among practitioners. The respondents in this questionnaire survey were 140 practitioners in architecture and interior design field. The major findings of this study were as follows; most of the respondents were aware of the impact of indoor built environment on residents' wellness. In addition, the survey respondents viewed that the factors for planning environment-friendly high-rise apartments were represented by gardening and energy-saving while their perception on the concept excluded comprehensive components affecting residents' life quality. Over 50% of respondents had an experience of applying environment-friendly planning elements in their works, and high frequency appeared on the general planning elements which had been applied special awareness as pro-environmental features. The respondents considered environment-friendly planning elements as important. Specially, space planning and system were considered more likely important in interior design field. In application of environment-friendly planning elements, cost, lack of consumers' awareness of and underdevelopment of environment-friendly materials were of concern. Therefore, the consumer's cognition needs to be improved for wide application about environment-friendly planning element, and then consumers are willing to pay additional construction cost of environment-friendly apartments. At the same time, the current practice that housing developers pass the additional cost on to residents needs to be changed. Then, the quality of life in high-rise residential settings can be improved. More importantly, the exchange and development of the reliable information on environment-friendly planning elements need to be made, and technical support and long-term policy for the development are required. This research showed current status of knowledge and practice in sustainable planning of unit apartment and proved basic information for future direction.

• KIEAE Journal
• /
• v.9 no.5
• /
• pp.47-52
• /
• 2009

Currently, the environmental issue is of great urgency and sensitivity to the future of our planet. Global warming caused by increased CO2 concentration has an alarming impact on the earth's fragile environment. Droughts throughout the world are causing crop failures. Wildfires now burn with far greater rage. Melting ice caps and glaciers are causing floods. Sea levels are rising. Warm unseasonable winters are threatening our fragile eco-systems. Global warming is no longer a theory; it is an obvious fact we are confronted with every day, and the only way we can prevent it is to take action now. The need to reduce CO2 emissions and try to become carbon neutral is of national importance and leadership. We have become so reliant on fossil fuels that nearly everything we do generates CO2 emissions; from our modern farming practices to transport, to the electricity used to turn on a light, boil water in a kettle or cook our meals. A reduction of 50% of CO2 emissions can easily be achieved by decreasing the energy amount used. We tracked the carbon footprint throughout the electricity and heating energy use in homes and confirmed the amount of carbon emissions according to its consumptions. In order to reduce the carbon generation from housing constructions, such as Passive House concept of buildings or low energy buildings, we must adjust its applications best fit to our conditions. And technical elements should be applied to improve our conditions, and the methodology should be actively sought. Most of all, each individual's recongnition who uses these elements is more important than any other solutions.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.169-175
• /
• 2017

Accounting information systems (AIS) capture and process accounting data and provide valuable information for decision makers. However, in a rapidly changing environment, continual management of the AIS is necessary for organizations to optimize performance outcomes. I suggest that building a dynamic AIS capability enables accounting process and organizational performance. Using the dynamic capabilities framework (Teece 2007). I propose that a dynamic AIS capability can bedeveloped through the synergy of three competencies: having (1) a flexible AIS, (2) a complementary business intelligence system, and (3) accounting professionals with IT technical competency. Using survey data, I find evidence of a positive association between a dynamic AIS capability, accounting process performance, and overall firm performance. The results suggest that developing a dynamic AIS resource can add value to an organization. This study provides guidance for organizations looking to leverage the performance outcomes of their environment.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.42-49
• /
• 2000

A major technical issue related to supporting multiple classes of service in IMT-2000 is the efficient management of limited channel. The selection of channel access control technique has a significant impact on user QOS, system capacity, and is therefore an important design parameter. In this paper, to achieve the service at resonable QOS level, while utilizing channel resource effectively, some improved methods are proposed by analyzing of the recently released methods.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.419-424
• /
• 2020

This study was to examine the educational satisfaction of students majoring in music education and provided suggestions to the college of education, Korea. First of all, 152 students majoring in music education in university, Korea, were surveyed. Second, the SPSS 22 for Windows program was used to conduct technical statistical analysis: independent sample t-test, one-way variance analysis, and cross-analysis. The result was that there were significant differences in the educational satisfaction, depending on the gender, school year, career-hopping professions, and individual efforts of students. College of Education has a huge impact on society as an institution that trains pre-service teachers who will teach future students. Therefore, based on the results of the study, I hope that the college of education will serve as fundamental institutes for the training of pre-service teachers.