• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.251-258
• /
• 2014

The purpose of this study is to present that the entrepreneurial orientation affects to management performance in the small manufacturer. In order to carry out this research, we obtained 171 survey sheets and inspected seven assumptions based on the reliability, validity of the questionnaires. The results of regression analysis are summarized as follows; First, the factor of entrepreneurial orientation, innovative-ness, influences on the technical innovation performance and financial performance significantly. Second, the element of entrepreneurial orientation, proactive-ness, has an important effect on the technical innovation performance and financial performance. Finally, the requisite of entrepreneurial orientation, risk taking, affects to the technical innovation performance significantly, but not the financial performance. Based on the results, the companies that achieve the technical innovation and financial performance have an atmosphere to encourage to perform the research and development works and find out innovative ideas and improvement points in processes. However, the entrepreneur is required to take careful judgement for determining the uncertain circumstance.

• 수산경영론집
• /
• 제49권1호
• /
• pp.37-50
• /
• 2018

The purpoose of this paper is to analyze the relative effciency of dreid laver processing companies in Korea and provide the development direction and improvement plan for the dried laver industry. Data on 76 dried laver processing companies were selected as the subjects for Dea. As a result of Dea, the average efficiency rate is shown that the technical efficiency is 84.90%, the pure technical efficiency is 93.83%, and the scale efficiency is 86.65%. and based on BCC results 38 companies are relatively efficient. comparing pure technical efficiency and scale efficiency, it showed that inefficiencies caused by scale of the company was greater than inefficiencies caused by the scale of technical matter. It implies that expanding the size is essential for achieving high-efficiency of dried laver processing company. In the inefficiency factor analysis, the result reveals that unstable supply of raw materials, quality management, capital flexibility and distribution ability influence the efficiency of laver processing company.

• 디지털융복합연구
• /
• 제12권10호
• /
• pp.1-20
• /
• 2014

국내 중소기업 대부분이 요소기술 확보 및 운영 혁신의 어려움에 처해있다. 글로벌 시장진출 역량부족 등으로 인해 성장정체를 겪고 있으며, 이는 경기 침체, 고용불황, 성장동력 상실 등 악순환 반복을 유발하고 있다. 본 연구는 중소 중견기업의 통계 데이터분석과 중견기업의 사례분석을 통하여, 이를 극복하기 위해 기업의 성장단계별 중소기업 기술혁신 변곡점을 확인하고 중소기업이 중견기업으로, 중견기업이 대기업으로 성장하기 위한 성장단계별 기술혁신관점의 핵심성공요인을 제시하고 지속가능성장을 위한 기술전략을 제시하고자 한다.

• 농촌지도와개발
• /
• 제23권2호
• /
• pp.145-156
• /
• 2016

The purpose of this study is to analyze the farms growing domestic kiwi fruit 'Gold' on their management performance and efficiency in order to reduce the risks involved with introducing new kind of crops for growing, and suggest improvements. First, the result of analysis showed that domestic kiwi fruit 'Gold' growers' income were higher than the average growers due to the fruit's high unit price and productivity. Second, the analysis of management efficiency resulted in scale efficiency having greater impact on inefficiency rather than pure technical efficiency. As for the analysis of technical efficiency, the depreciation costs of agricultural facilities had the greatest influence on its inefficiency. Third, inefficient farms put in excessive inputs across the board, while labor costs(self labor cost + hired labor cost) were the largest factor of optimal inputs according to the models of technical efficiency and pure technical efficiency. Fourth, because of greater reliance on mechanical tools from rising labor costs, there's a need for individual farms to avoid buying farming equipments and instead share the equipments of nearby farms and agricultural cooperatives, or start renting agricultural machines from companies.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1995년도 VTS and IBS 95 The Korean Institute of Navigation 1995년도
• /
• pp.125-152
• /
• 1995

An Integrated Bridge System (IBS) is not an officially defined term, but a concept of which integrates on a consol at bridge the primary functions of stand-alone navigational aids and communication instruments or of stand-alone units which are integrated i.e. ARPA ECDIS It aims to enable officers on navigational watch to perform their duty without impairing proper lookout. IBS has been taking shape through a rapid development of navigation and communication systems in relation with bridge configuration bridge work station and one man bridge operation system. IBS related matters have been considered for years and is on the agenda of the International Maritime Organization(IMO) for its technical details and safety aspect of possible one-man watchkeeping at night. However IMO has made it clear that human element should be the key factor in considering IBS and single watchkeeping issue. In the development of IBS ergonomic element and human psychological aspect have been more emphasized than technical requirements. This paper refers to documents presented to the IMO and its progress made in various IMO technical meetings on the development of IBS which is perceived as an effective aid to proper bridge lookout and those standards adopted by classification societies on the composition of workstation at bridge in order to identify the international trend on regulating required equipment function of workstation of IBS the regulatory review process and technical recommendations related thereto.

• Animal Bioscience
• /
• 제37권5호
• /
• pp.929-943
• /
• 2024

Objective: The present study was executed to explore the molecular mechanism of fibroblast growth factor 10 (FGF10) gene in bovine adipogenesis. Methods: The bovine FGF10 gene was overexpressed through Ad-FGF10 or inhibited through siFGF10 and their negative control (NC) in bovine adipocytes, and the multiplicity of infection, transfection efficiency, interference efficiency were evaluated through quantitative real-time polymerase chain reaction, western blotting and fluorescence microscopy. The lipid droplets, triglycerides (TG) content and the expression levels of adipogenic marker genes were measured during preadipocytes differentiation. The differentially expressed genes were explored through deep RNA sequencing. Results: The highest mRNA level was found in omasum, subcutaneous fat, and intramuscular fat. Moreover, the highest mRNA level was found in adipocytes at day 4 of differentiation. The results of red-oil o staining showed that overexpression (Ad-FGF10) of the FGF10 gene significantly (p<0.05) reduced the lipid droplets and TG content, and their down-regulation (siFGF10) increased the measurement of lipid droplets and TG in differentiated bovine adipocytes. Furthermore, the overexpression of the FGF10 gene down regulated the mRNA levels of adipogenic marker genes such as CCAAT enhancer binding protein alpha (C/EBPα), fatty acid binding protein (FABP4), peroxisome proliferator-activated receptor-γ (PPARγ), lipoprotein lipase (LPL), and Fas cell surface death receptor (FAS), similarly, down-regulation of the FGF10 gene enriched the mRNA levels of C/EBPα, PPARγ, FABP4, and LPL genes (p<0.01). Additionally, the protein levels of PPARγ and FABP4 were reduced (p<0.05) in adipocytes infected with Ad-FGF10 gene and enriched in adipocytes transfected with siFGF10. Moreover, a total of 1,774 differentially expressed genes (DEGs) including 157 up regulated and 1,617 down regulated genes were explored in adipocytes infected with Ad-FGF10 or Ad-NC through deep RNA-sequencing. The top Kyoto encyclopedia of genes and genomes pathways regulated through DEGs were the PPAR signaling pathway, cell cycle, base excision repair, DNA replication, apoptosis, and regulation of lipolysis in adipocytes. Conclusion: Therefore, we can conclude that the FGF10 gene is a negative regulator of bovine adipogenesis and could be used as a candidate gene in marker-assisted selection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2121-2125
• /
• 2003

This paper proposes a fast distributed constrained power control (FDCPC) with non-stationary relaxation factor to next power update in CDMA cellular power control system. We review unconstrained control algorithms, the distributed power control (DPC), unconstrained second order power control (USOPC) and DPC with stationary relaxation factor (DPCSRF). Under the unconstrained condition, the convergence analysis shows theoretically that the convergence rate of DPC is the fastest one. However, under the constrained control algorithms, DCPC is not the fastest one any more because of transmission power constraint. To improve the convergence speed, the DCPC with non-stationary relaxation factor (FDCPC) are proposed. Under the constrained condition, the convergence rate of FDCPC outperforms that of DCPC and CSOPC.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.241-244
• /
• 2007

It is increased electrical energy consumption with the development of intelligence society in office buildings and thus an energy conservation through efficient use of electricity became more important. This paper shows a reasonable design demand factor in office buildings, that was made by the systematic and statistical way considering actual conditions, such as investigated electric equipment capacity, peak power consumption, demand factor, etc., for 132 office buildings. In this dissertation, it is necessary to analyze the key features and general trend from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum, minimun and thus it was carried linear and nonlinear regression analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1940-1943
• /
• 1998

A new PWM rectifier which offers a unity power factor is proposed. The circuit has same inductance as the conventional boosting type PWM rectifier in powering mode, but the inductance is splitted to 2 part in freewheeling mode. So the period of freewheeling mode is shorter than that of conventional boosting type PWM rectifier, and discontinuous input current is obtained in wide duty range. Therefore the proposed PWM rectifier accomplishs a unity power factor in wide range of duty ratio and boosting factor. And the conventional boosting type PWM rectifier has poor power factor near the unity boosting ratio, the proposed PWM rectifier improves this problem. The mathmatical analysis are presented and experimental results are given.

• 산업경영시스템학회지
• /
• 제32권2호
• /
• pp.140-146
• /
• 2009

Since the computer technology has been drastically developed and broadly employed for the design of human machine system, human system interface was somehow digitalized. Actually the operator's working environment employing the digital devices are not be fully digitalized due to its technical constraints so that it has been changed to the hybrid environment which has a combination of digital and analog elements. The hybrid environments need to study its characteristics and the guidelines for the proper design and evaluation purpose. This paper describes the human factor design elements of the console operated under hybrid environment through studying the characteristics of digital and analog environment based on the related human factor guidelines and literatures. The result of this paper implies the contribution to the evaluation of the generic human working environment which digital and analog elements are jointly used.