• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.900-907
• /
• 2013

Payload fairing(PLF) protects satellites and related equipment from the external environment. They are separated before the satellite separation. Payload fairing made of composite sandwich materials due to their considerable bending stiffness and strength-to-weight ratio. Payload fairing have compression, shear and bending load during the flight. In this study, To check the strength of PLF and connected part, structural test of PLF accomplished using an actuator and a fixture. Purpose of structural test is to verify the strength of PLF in force of separation spring and combination structural load applied. Test result shows that the PLF have an acceptable margin of safety for the combination structural load and force of separation spring.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.105-109
• /
• 2014

Structure and electrical properties of $0.85NaNbO_3-0.15LiNbO_3$ ($(Li_{0.15}Na_{0.85})NbO_3$) ceramics were investigated as a function of sintering temperature. $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were prepared by conventional solid state processing. A main phase of the orthorhombic perovskite structure and secondary phase of $LiNbO_3$ were confirmed for all sintered specimens. Dense $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were obtained at sintering temperature above $1050^{\circ}C$. With increasing sintering temperature, the electromechanical coupling factor ($k_p$), piezoelectric constant ($d_{33}$) and relative dielectric constant (${\varepsilon}_r$) of the sintered specimens increased, while the mechanical quality factor ($Q_m$) decreased. These results are due to the increase of grain size and crystallite size of orthorhombic perovskite structure. Based on the temperature dependence of ${\varepsilon}_r$, stable piezoelectric properties were expected because no phase transition found up to $300^{\circ}C$. Typically, kp of 18%, $d_{33}$ of 34.7 pC/N, ${\varepsilon}_r$ of 135, and $Q_m$ of 62.8 were obtained for the specimens sintered at $1200^{\circ}C$ for 5 h.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.338-343
• /
• 2013

Integrated Project Delivery (IPD) as a delivery method fully capitalizes on an integrated project team that takes advantage of the knowledge of all team members to maximize project outcomes. IPD is currently the highest form of collaboration available because all three core project stakeholders, owner, designer and contractor, are aligned to the same purpose. Compared with traditional project delivery approaches such as Design-Bid-Build (DBB), Design-Build (DB), and CM at-Risk, IPD is distinguished in that it eliminates the adversarial nature of the business by encouraging transparency, open communication, honesty and collaboration among all project stakeholders. The team appropriately shares the project risk and reward. Sharing reward is easy, while it is hard to fairly share a failure. So the compensation structure and the contingency in IPD are very different from those in traditional delivery methods and they are expected to encourage motivation, inspiration and creativity of all project stakeholders to achieve project success. This paper investigates the compensation structure in IPD and provides a method to determine the proper level of contingency allocation to reduce the risk of cost overrun. It also proposes a method in which contingency could be used as a functional monetary incentive when established to produce the desired level of collaboration in IPD. Based on the compensation structure scenario discovered, a probabilistic contingency calculation model was created by evaluating the random nature of changes and various risk drivers. The model can be used by the IPD team to forecast the probability of the cost overrun and equip the IPD team with confidence to really enjoy the benefits of collaborative team work.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2001.12a
• /
• pp.271-282
• /
• 2001

• ETRI Journal
• /
• v.25 no.3
• /
• pp.195-202
• /
• 2003

This paper proposes a new LDMOSFET structure with a trenched sinker for high-power RF amplifiers. Using a low-temperature, deep-trench technology, we succeeded in drastically shrinking the sinker area to one-third the size of the conventional diffusion-type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power-added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below -40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.

• Journal of the Korean Society of Systems Engineering
• /
• v.8 no.1
• /
• pp.21-28
• /
• 2012

Development of the system that has required performance is the most important figure and that is the key of project succeed. In order to perform that, systems engineering has come to the fore as a solution. In each step of system engineering process, particularly, requirement analysis and derivation, logical solution, architecture design step are known to affect many of the function and efficiency. Of these, this paper focus on architecture design. We introduce methodology for physical architecture design by applying DSM(Design Structure Matrix) methodology which is based on result of logical solution from MBSE methodology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.395-398
• /
• 2004

We developed an a-Si TFT-LCD panel with integrated gate driver circuit using a standard 5-MASK process. To minimize the effect of the a-Si TFT current and LC's capacitance variation with temperature, we developed a new a-Si TFT circuit structure and minimized coupling capacitance by changing vertical architecture above gate driver circuit. Integration of gate driver circuit on glass substrate enables single chip and 3-side free panel structure in a-Si TFT-LCD of QVGA(240$^{\ast}$320) resolution. And using double ASG structure the dead space of TFT-LCD panel could be further decreased.

• Journal of Ecology and Environment
• /
• v.43 no.4
• /
• pp.454-461
• /
• 2019

Background: Ikonnikov's whiskered bat (Myotis ikonnikovi) is found throughout the Korean Peninsula, as well as in Kazakhstan, Russia, Mongolia, China, and Japan. It is small-sized and primarily inhabits old-growth forests. The decrease and fragmentation of habitats due to increased human activity may influence the genetic structure of bat populations. This study was designed to elucidate the population genetic structure of M. ikonnikovi using mitochondrial genes (cytochrome oxidase I and cytochrome b). Results: The results showed that M. ikonnikovi populations from Korea have high genetic diversity. Although genetic differentiation was not detected for the COI gene, strong genetic differentiation of the Cytb gene between Mt. Jeombong and Mt. Jiri populations was observed. Moreover, the results indicated that the gene flow of the maternal lineage may be limited. Conclusions: This study is the first to identify the genetic population structure of M. ikonnikovi. We suggest that conservation of local populations is important for sustaining the genetic diversity of the bat, and comprehensive studies on factors causing habitat fragmentation are required.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.1-7
• /
• 2006

The three-dimensional structure of an inorganic crystal, $SmZn_{0.67}Sb_2$ (space group $P4/nmm,\;a=4.30(3){\AA}\;and\;c= 10.27(1){\AA}$), was refined by electron crystallography utilizing high voltage electron microscopy (HVEM). Effects of instrumental resolution, image quality, beam damage and specimen tilting on the structure refinement have been evaluated. The instrumental resolution and image quality were the most important factors on the final results in the structure refinement, while the beam damage and specimen tilting effects could be experimentally minimized or controlled. The average phase errors $({\Phi}_{res})$ for the [001], [100] and [110] HVEM images of $SmZn_{0.67}Sb_2$ were $10.1^{\circ},\;9.6^{\circ}\;and\;6.8^{\circ}$, respectively. The atomic coordinates of $SmZn_{0.67}Sb_2$ were consistent within $0.0013{\AA}{\sim}0.0088{\AA}$, compared to the X-ray crystallography data for the same sample.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.41.1-41.1
• /
• 2007