• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.5
• /
• pp.217-222
• /
• 2007

Microwave dielectric properties of $(1-x)CaWO_4-xYNbO_4$ ceramics have been investigated as a function of $YNbO_4$ content($0.05{\leq}x{\leq}0.4$). A single phase with tetragonal scheelite structure was obtained up to x=0.10 and then the secondary phase with fergusonite structure was increased. With the increase of $YNbO_4$ content, apparent densities of the specimens were decreased. This results were due to the lower theoretical density of $YNbO_4(5.581g/cm^3)$ than that of $CaWO_4(6.117g/cm^3)$. Dielectric constant(K) and quality factor(Qf) were decreased with $YNbO_4$ content which could be attribute to the decrease of density and the increase of secondary phase. Temperature coefficient of resonant frequency (TCF) of the specimens with the $YNbO_4$ content was depended on dielectric mixing rule.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.235-235
• /
• 2009

This paper describes the influence of a polycrystalline (poly) 3C-SiC buffer layer on the surface acoustic wave (SAW) properties of poly aluminum nitride (AlN) thin films by comparing the center frequency, insertion loss, the electromechanical coupling coefficient ($k^2$), andthetemperaturecoefficientoffrequency(TCF) of an IDT/AlN/3C-SiC structure with those of an IDT/AlN/Si structure, The poly-AlN thin films with an (0002)-preferred orientation were deposited on a silicon (Si) substrate using a pulsed reactive magnetron sputtering system. Results show that the insertion loss (21.92 dB) and TCF (-18 ppm/$^{\circ}C$) of the IDT/AlN/3C-SiC structure were improved by a closely matched coefficient of thermal expansion (CTE) and small lattice mismatch (1 %) between the AlN and 3C-SiC. However, a drawback is that the $k^2(0.79%)$ and SAW velocity(5020m/s) of the AlN/3C-SiC SAW device were reduced by appearing in some non-(0002)AlN planes such as the (10 $\bar{1}$ 2) and (10 $\bar{1}$ 3) AlN planes in the AlN/SiC film. Although disadvantages were shown to exist, the use of the AlN/3C-SiC structure for SAW applications at high temperatures is possible. The characteristics of the AlN thin films were also evaluated using FT-IR spectra, XRD, and AFM images.

• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.4
• /
• pp.305-310
• /
• 2006

Abnormal activation of the Wnt/${\beta}$-catenin pathway and subsequent up-regulation of ${\beta}$-catenin response transcription (CRT) are associated with the development of colon cancer. Thus, the Wnt/${\beta}$-catenin pathway is an attractive target for chemoprevention and treatment of this cancer. In this study, we used a cell-based screen to identify a methanol extract of Dictyota dichotoma (EDD) that suppresses the Wnt/${\beta}$-catenin pathway without altering the level of ${\beta}$-catenin protein and reduces the expression of cyclin D1, which is a known ${\beta}$-catenin/T cell factor (TCF)-dependent gene. EDD inhibited the growth of various colon cancer cells. Our findings suggest that EDD can potentially be used as a chemopreventive agent against colon cancer.

• Animal Bioscience
• /
• v.36 no.2
• /
• pp.191-199
• /
• 2023

Objective: This study aimed to investigate the significant single nucleotide polymorphisms (SNPs) and genes associated with nine reproduction and morphological traits in three breed populations of Chinese goats. Methods: The genome-wide association of nine reproduction and morphological traits (litter size, nipple number, wattle, skin color, coat color, black dorsal line, beard, beard length, and hind leg hair) were analyzed in three Chinese native goat breeds (n = 336) using an Illumina Goat SNP50 Beadchip. Results: A total of 17 genome-wide or chromosome-wide significant SNPs associated with one reproduction trait (litter size) and six morphological traits (wattle, coat color, black dorsal line, beard, beard length, and hind leg hair) were identified in three Chinese native goat breeds, and the candidate genes were annotated. The significant SNPs and corresponding putative candidate genes for each trait are as follows: two SNPs located on chromosomes 6 (CSN3) and 24 (TCF4) for litter size trait; two SNPs located on chromosome 9 (KATNA1) and 1 (UBASH3A) for wattle trait; three SNPs located on chromosome 26 (SORCS3), 24 (DYM), and 20 (PDE4D) for coat color trait; two SNPs located on chromosome 18 (TCF25) and 15 (CLMP) for black dorsal line trait; four SNPs located on chromosome 8, 2 (PAX3), 5 (PIK3C2G), and 28 (PLA2G12B and OIT3) for beard trait; one SNP located on chromosome 18 (KCNG4) for beard length trait; three SNPs located on chromosome 17 (GLRB and GRIA2), 28 (PGBD5), and 4 for hind leg hair trait. In contrast, there were no SNPs identified for nipple number and skin color. Conclusion: The significant SNPs or genes identified in this study provided novel insights into the genetic mechanism underlying important reproduction and morphological traits of three local goat breeds in Southern China as well as further potential applications for breeding goats.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2012

Dyeing and fastness characteristics of 100% meta-aramid fiber were investigated with cationic dyes and swelling agents under various dyeing conditions such as dyeing temperature and pH of dye bath. Dye exhaustion started at around $80^{\circ}C$ and settled down at $130^{\circ}C$. Among swelling agents used, N-methyl formanilide showed comparatively higher K/S values comparing to 1-phenoxypropan-2-ol. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption and stability of colorimetric property. Wash and rubbing fastness were generally good but low light fastness found can be attributable to the poor photo-stability of the cationic dyes.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2014

We have designed and synthesized the colorimetric chemosensor through the reactions of 1,2-anthraquinone and indol-3-carboxaldehyde. Due to its well conjugated D-${\pi}$-A system and the existence of NH-fragment in indole moiety, we expected that the chemosensor can detect target anions with NH-fragment in indole part of the structure. In this regard, UV-Vis absorption spectra were measured to investigate sensing properties of the probe toward different anions in DMSO. This chemosensor shows to detect fluoride anions with absorption change in intensity. These properties are mainly related to the deprotonation effect. ICT system in this molecule was also observed by the computational approach using Material Studio 4.3 package.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.317-320
• /
• 2014

A balanced RF duplexer with low interference in an extremely narrow bandgap is proposed. The Long-Term Evolution band-7 duplexer should be designed to prevent the co-existence problem with the WiFi band, whose fractional bandgap corresponds to only 0.7%. By implementing a hybrid bulk acoustic wave (BAW) structure, the temperature coefficient of frequency (TCF) value of the duplexer is successfully reduced and the suppressed interference for the narrow bandgap is performed. To achieve an RF duplexer with balanced Rx output topology, we also propose a novel balanced BAW Rx topology and RF circuit block. The novel balanced Rx filter is designed with both lattice- and ladder-type configurations to ensure excellent attenuation. The RF circuit block, which is located between the antenna and the Rx filter, is developed to simultaneously function as a balance-tounbalance transformer and a phase shift network. The size of the fabricated duplexer is as small as $2.0mm{\times}1.6mm$. The maximum insertion loss of the duplexer is as low as 2.4 dB in the Tx band, and the minimum attenuation in the WiFi band is as high as 36.8 dB. The TCF value is considerably lowered to $-16.9ppm/^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2013

Nowdays, the computational simulation of molecular energy potentials and the empirical evidence using electrochemical reduction/oxidation values are very significant factors to predict of molecule's energy potentials. The prepared chemosensor herein consists of spirolactam ring system in the structure, providing intra-structural change with metal cation binding. In this study, rhodamine 6G-Naphthaldehyde chemosensor was determined and compared with HOMO/LUMO energy levels by computational calculation and cyclic voltammogram method.

• Textile Coloration and Finishing
• /
• v.30 no.1
• /
• pp.1-8
• /
• 2018

In the present study, three morpholine substituted crystal violet lactone (CVL) have been synthesized to monitor the thermochromic property. This work is explaining the role of substituent on the lactone ring. The methyl substituents induced greater chromic effects than the chloro substituents. Furthermore, the three-component mixtures that contained CVL, bisphenol-A, and methyl stearate were used to analyse the thermochromic effect of the CVLs as bulk samples with various temperature. The thermochromic properties of the CVLs were evaluated using solid-state UV-Vis and FT-IR spectroscopic techniques. Finally, one of the synthesized CVL has been successfully converted into the form of a test paper similar to pH paper for use as thermal indicators.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.16-21
• /
• 2008

In this study the effects of swelling and fixing agent for the cotton side of polyester/cotton blended fabrics and the thermosol temperature on the dyeing properties and fastness. were investigated, when the polyester/cotton blended fabrics were dyed with a disperse dye which was able to dye both side of fiber by one bath one step thermosol process. The obtained results are as follows; The dye adsorption decreased with the increase of cotton blend ratio in polyester/cotton blended fabrics, when the ratio of swelling and fixing agent for cotton side was constant. As the thermosol temperature increased up to $210^{\circ}C$, the dye adsorption were increased, but that effect was less significant when the cotton blend ratio was higher.