• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.2
• /
• pp.277-288
• /
• 1998

The study was conducted to provide basic data for the development of nursing management research and suggesting the direction of the future research and the theory of nursing management. In this study, 456 pieces of articles that had been published for the last 10 years from 1987 to 1996 were analyzed based on the nursing research methodology of Lee et al. (1991). The results were as follows: 1. The whole articles were divided into two groups. that is. degree dissertations of 69.7%(307 pieces of master's and 11 pieces of doctor's) and non-degree papers of 30.3%. 2. In the light of graduate school types. the papers of the graduate school of administration formed 41.8% of the entire articles and those of the general graduate schools formed 32.4% of them. 3. In the methodology of research design. survey research held 86.8% of the whole articles. 4. In the research subject. nurses held 68.4%. others 14.6%. patients 9.4%. 5. In the data collecting method. questionnaire held 85.1%. 6. In the statistics method. 88.1% of the entire articles used inference method. 7. In the area of nursing management. direct stage formed 26.8%. control stage 21.9%. and staffing stage 20.6% of the whole articles. 8. In the light of frequency of the key concept. job satisfaction held 10.9%. nursing task 8.5%. role 7.0%. stress 4.7%, and perception 4.0%. On the basis of the results. the following suggestions were made: 1. Qualitative studies should be done to recognize the phenomena. and experimental studies to prove the intervention for the improvement of future nursing management researches. 2. For the development of nursing management. all-inclusive studies. the group or the whole organization-centered studies rather than nurse-centered, should be required. 3. In order to be valid. data should be collected by various methods. 4. For the balanced studies of nursing management. getting out of the concentrated study of just one concept, repetitive study of various concept should become the subject of them.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.225-234
• /
• 2012

In Wireless Sensor Networks (WSNs) where deployed sensors are not stationary, the most important demand of is to design a cost effective and reliable network. This paper proposes an energy aware network construction and routing scheme, which is based on the hierarchical approach to distribute the task in some sensors in order to prolong the network lifetime. It aims to make even the energy consumption on constitute nodes. With the node hierarchy, the sink initiates the construction by electing gateway nodes in the network and the elected gateway nodes participate to form logical clusters by electing a cluster head in each cluster. Then, the cluster heads aggregate data from the sensing sensors and transmit the data to the sink through the gateway. Our simulation result illustrates that the proposed scheme provides a basement to reduce the source of energy dissipation in network construction, and as well as in data routing.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2020

Mission reliability is defined by the probability of accomplishing the requirements task that were targeted in product development, and in the case of combat systems, mission reliability is an important factor that will determine victory or defeat, unlike commercial equipment. The mission reliability of the existing domestic combat system was calculated by considering only the physical connections of the equipment involved in the mission performance, but as the equipment becomes increasingly sophisticated and complex, it is impossible to determine the mission relevance solely by physical connection. Thus, in this paper, improved mission reliability was calculated using SysML, the system design modeling language, by taking into account the functional connection as well as physical connection. Based on this research, we look forward that the mission reliability of the combat system that will be developed in the future will be used as a verification material.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.20 no.3
• /
• pp.382-391
• /
• 2014

Purpose: The purpose of this study was to identify the predictors influencing on educational intervention for Attention Deficit Hyperactivity Disorder (ADHD) after analyzing the relationship among teachers' internal-external locus of control, leadership type and educational intervention for ADHD. Methods: A cross sectional study design was conducted with 255 teachers in three schools located in D, K and Y city. The data were analyzed by t-test, one-way ANOVA, Pearson correlation coefficients and multiple regression using SPSS 20.0. Results: Internal locus of control showed significantly positive correlations with educational intervention for ADHD. Efficient leadership type, harmony-oriented leadership type showed significant differences in inefficient leadership type on educational intervention for ADHD. Significant factors of the educational intervention were efficient leadership type, harmony-oriented leadership type, task-oriented leadership type and internal locus of control that were explained by 20.0% (F=12.5, p<.001) of educational intervention for ADHD. Conclusion: Based on the findings of this study, it is necessary to have teacher's efficient leadership type focused on ADHD symptoms. Teachers need to enhance their positive domain of internal-external locus of control towards students with ADHD to increase the effectiveness of their educational interventions for ADHD.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.2
• /
• pp.343-364
• /
• 2017

Despite the significance of functional thinking at the elementary school level there has been lack of research on teachers who play a major role in making students be engaged in functional thinking. This study surveyed 119 elementary school teachers to investigate their knowledge of functional thinking for teaching. A written assessment for this study was developed with a focus on the knowledge of mathematical tasks and instructional strategies to teach functional thinking. The results of this study showed that many teachers were able to design tasks corresponding to both the additive relationship and the multiplicative relationship, and to justify some strategies to promote functional thinking. However, some teachers had lack of understanding with regard to the core ideas of functional thinking. Based on these results this study is expected to suggest implications on what aspects of knowledge are further needed for elementary school teachers to promote students' functional thinking.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1181-1192
• /
• 1998

This paper describes the performance of a full-authority neural network-based fault tolerant system within a flight control system. This fault tolerant flight control system integrates sensor and actuator failure detection, identification, and accommodation (SFDIA and AFDIA), The first task is achieved by incorporating a main neural network (MNN) and a set of n decentralized neural networks (DNNs) to create a system for achieving fault tolerant capabilities for a system with n sensors assumed to be without physical redundancy The second scheme implements the same main neural network integrated with three neural network controllers (NNCs). The function of NNCs is to regain equilibrium and to compensate for the pitching, rolling. and yawing moments induced by the failure. Particular emphasis is placed in this study toward achieving an efficient integration between SFDIA and AFDIA without degradation of performance in terms of false alarm rates and incorrect failure identification. The results of the simulation with different actuator and sensor failures are presented and discussed.

• The Journal of Art Theory & Practice
• /
• no.9
• /
• pp.195-215
• /
• 2010

Alberti's De re aedificatoria is the earliest case in the history of Italian Renaissance architectural treatises dealing with recovery of antiquity through textual and archaeological pursuits. The key source of the Renaissance theoreticians was Vitruvius' De architectura. However, Alberti was keenly aware of inaccuracy and Hellenization of Latinity in this classical text, and tried to compensate them in his own treatise. Furthermore he claimed a reformed discipline of the architects as well as the patrons, and prescribed how future buildings and cities should be built, based on the proper authority of ancient architecture in proper and intelligible Latin. Such an adaptation of classical usage in order to reestablish a modern norm preceded in his earlier work Momus, a satire on the contemporary Italian society of his own by following the model of Lucian. Alberti's suggestion of proper government in Momus's phrase was expanded in De re aedificatoria, for he consider the buildings are subject to the rules of morality and public interests. He proclaimed that the nature of beauty is the reasoned harmony of every part within a body, and architectural beauty also lies on the harmonized arrangement of all the elements within an individual building and of all individual buildings and facilities within a city. For the architects to execute this task, he formulated the concept of lineanenta, the form derived from the mind in order to prescribe the proper place, numbers, scale, and orders for whole building structure. It is the future oriented city-plans and building designs to serve the public interest and the good of all the individual citizens who make up the City-State that Alberti pursued in his treatise.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.961-968
• /
• 1996

In the frame of Koreasat Project, it has been identified the task to implement a pilot satellite network module to provide LAN-to-LAn in ground system for satellite links. The pilot network will support an experiment to verify the performances of the considered applications through a satellite.This paper proposes a satellite-LAN interconnecting architecture making full use of satellite benefits and counteracting satellite demerits. The architectureprovides high quality data transmission and high perfrmance for satellite bit errors by using a connection- oriented satellite protocol which can establish multiple logical links between two nodes. As a protocol conversion method, router-type interconnection was selected to guard against problems. Based on this architecture, a satellite LAN interconnecting system has been designed, which includes a 1.8 meter antenna with a 4 watt transceiver, a satellite modem and the developed satellite network interface. The system can support high speed transmission rates of up to 1.544 Mbs and superior network management as well.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1539-1547
• /
• 1999

캐리-세이브 가산기 (CSA)는 회로 설계 과정에서 빠른 연산 수행을 위해 가장 널리 이용되는 연산기 중의 하나이다. 그러나, 현재까지 산업체에서 CSA를 이용한 설계는 설계자의 경험에 따른 수작업에 의존하고 있고 그 결과 최적의 회로를 만들기 위해 매우 많은 시간과 노력이 소비되고 있다. 이에 따라 최근 CSA를 기초로 하는 회로 합성 자동화 기법에 대한 연구의 필요성이 대두되고 있는 상황에서, 본 논문은 연산 속도를 최적화하는 효율적인 CSA 할당 알고리즘을 제안한다. 우리는 CSA 할당 문제를 2단계로 접근한다: (1) 연산식의 멀티 비트 입력들만을 고려하여 최소 수행 속도 (optimal-delay)의 CSA 트리를 할당한다; (2) (1)에서 구한 CSA 트리의 수행 속도 증가가 최소화 (minimal increase of delay) 되는 방향으로 CSA들의 캐리 입력 포트들에 나머지 싱글 비트 입력들을 배정한다. 실제 실험에서 우리의 제안된 알고리즘을 적용하여 연산식들의 회로 속도를 회로 면적의 증가 없이 상당한 수준까지 줄일 수 있었다.Abstract Carry-save-adder (CSA) is one of the most widely used implementations for fast arithmetics in industry. However, optimizing arithmetic circuits using CSAs is mostly carried out by the designer manually based on his/her design experience, which is a very time-consuming and error-prone task. To overcome this limitation, in this paper we propose an effective synthesis algorithm for solving the problem of finding an allocation of CSAs with a minimal timing for an arithmetic expression. Specifically, we propose a two step approach: (1) allocating a delay-optimal CSA tree for the multi-bit inputs of the arithmetic expression and (2) determining the assignment of the single-bit inputs to carry inputs of the CSAs which leads to a minimal increase of delay of the CSA tree obtained in step (1). For a number of arithmetic expressions, we found that our approach is very effective, reducing the timing of the circuits significantly without increasing the circuit area.

• Journal of Practical Engineering Education
• /
• v.7 no.1
• /
• pp.25-30
• /
• 2015

Virtual reality is a combination of various studies, such as programming, simulation, and computer graphics. This type of new cultural paradigm requires novel concept of contents development and information exchange. This research uses 3D virtual reality technology in new equipment called I-Bench Mobile which let user to interact with the equipment for completing furniture disposition task. The simulation is manufactured in 3D with application of physics, and the ultimate goal of it is to increase customers' satisfaction by allowing them to enjoy snap shot function for arranging furniture at exact desired place. This research requires not only coding techniques but also educating process in both engineering and art, such as computer science, media art design, and visual communication; therefore, the development of software by facilitating Virtual/Augmented Reality technology in this research is a good example of fusion IT technique education.