• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.64-75
• /
• 2005

The total production of food waste was about 11,398ton/day('03) in Korea. Also, food waste was treated by landfill, incineration, reuse and anaerobic digestion. The method of food waste treatment depended primarily on landfill. However, the method of landfill causing social problems was prevented to treat food waste in the first of January 2005.12) Thus, anaerobic digestion is an important method to treat food waste because of possibility of energy recovery as methane gas. In this study, the possibility of food waste treatment containing high organic material and low pH in the one stage anaerobic reactor to save cost and time and energy recovery using $CH_{4}$ gas by the hybrid anaerobic reactor (HAR) was measured. The HAR was designed by combing the merits of the anaerobic filter (AF) to minimize the microorganism shock when food waste of very low pH was injected and up-flow anaerobic sludge blanket (UASB) to prevent from plugging and channeling phenomena by large suspended solids when semi solids were injected. Granule was packed in the section of HAR. The purpose of the BMP experiment was to measure the amount of methane generated when organic material was resolved under anaerobic conditions, to grasp bio resolution of organic material. Total accumulated methane production per VS amount was $0.471(m^{3}/\cal{kg}\;VS)$. So, the value was about $81.2\%$ of theoretical methane production which was $0.58(m^{3}/\cal{kg}\;VS)$ by elementary analysis and organic matter removal velocity (K) was $0.18(d^{-1})$. From these results, food waste was treated by anaerobic treatment. From this study, $CH_{4}$ generation from food waste (11,398 ton/day) could be estimated. By using an energy conversion factor of Braun's study, $5.97KWh/m^{3}\;CH4,\;60\%\;of\;CH_{4}$ gas generation, the amount of total energy producing food waste is to 6,727MWh/day. It could be confirmed that energy recovery using $CH_{4}$ gas was possible. Above these results, food waste containing organic matters of high concentration could be treated in HRT 30 days under an anaerobic condition, using the hybrid anaerobic reactor and reuse of $CH_{4}$ gas was possible.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.11-20
• /
• 2005

This study has a purpose on contributing to apprehend safe and right way to stop to the inline skate beginners and to the instructors who teaches line skating on the basis for the result of the kinematical analysis on Heel brake stop movement of the inline skate, focusing on the displacement on COG, angle displacement of ankle joint, angle displacement of knee joint, angle displacement of hip joint, using a 3D image method by DLT. To achieve this goal, we analysed the kinematical factor of the 3 well-trained inline skating instructors and obtained the following results. 1. During the movement of heel-brake stop, when strong power was given to a stable and balanced stop and the lower limbs, if the physical centroid is lowered the stability increases, and if it is placed high from the base surface, as the stability decreases compared to the case of low physical centroid, we should make a stop by placing a physical centroid in the base surface and lowering the hight of physical centroid. 2. To make a stable and balanced stop and to provide a strong power to the lower limbs, it is advisable to make a stop by decreasing an angle displacement of ankle joint during a "down" movement. In case of the left ankle joint, in all events and phases the dorsiflexion angle showed a decrease. Nevertheless, in the case of the right ankle joint, the dorsiflexion angle shows an increase after a slight decrease. The dorsiflexion angle displacement of ankle joint can be diminished because of the brake pad of the rear axis frame of the right side inline skate by raising a toe, but cannot be more decreased if certain degree of an angle is made by a brake pad touching a ground surface. To provide a power to a brake pad, it is recommended to place a power by lowering a posture making the dorsiflexion angle of the left ankle joint relatively smaller than that of the right ankle. 3. To make a stable and balanced stop and to add a power to a brake pad, the power must be given to the lower limbs in lowering the hight of physical centroid. For this, it is recommended to make a down movement by decreasing the flexion angle of a knee joint and it is necessary to make a down movement by a regular decrease of the angle displacement of knee joint rather than a swift down movement in every event and phase. 4. The right angle displacement of hip joint is made by lowering vertically the hight of physical centroid as leaning slightly forward. If too narrow angle displacement of hip joint is made by leaning forward too much, the balance is lost during the stop by placing the center in front. To make a stable and balance stop and to place a strong power to the lower limbs, it is recommendable to make a narrow angle by lower the hip joint angle. However, excessive leaning of the upper body to make the angle too narrow, can cause an instable stop and loss of physical centroid. After this study, it is considered to assist the kinematical understanding during the heel brake stop movement of the inline skate, and, to present basic data in learning a method of stable and balanced stop for the inline skating beginners or for the inline skate instructors in the present situation of the complete absence of the study in inline skating.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.9-22
• /
• 1992

Two crystal structures of bromine sorption complexes of vacuum dehydrated Cd(ll)-exchanged zeolite A have been determined by single-crystal xray diffraction techniques in the cubic space group Pm3m at 21(1) ℃. Both crystals were ion exchanged in flowing streams of exchange solution In which mole ratio of Cd(NO3)2 and Cd(OOCCH3)B was 1:1 with a total concentration of 0.05 M. First crystal was dehydrated at 450℃ and 2 ×10-6 Torr for two days. Second crystal was dehydrated at 650℃ and 2 ×10-6 Torr for two days. Both crystals were then treated with 160 Torr for two days. Second crystal was dehydrated at 650℃ and 2 × 10-6 Torr for two days. Both crystals were then treated with 160 Torr of zeolitically dried bromine vapor at 24℃. Full-matrix least-squares refinements of toe first crystal(a: 12.250(1) A )· and the second crystal(a: 12.204(2) A ) have contecoed to final error indices, Rl:0.075 and Ra:0.079 with 212 reflections, and Rl : 0.089 and Ra = 0.078 with 128 reflections, respectively, for which I >3σ(I). Crystallographic analyses of both crystals show that six Cd2+ ions are located on two different threefold axes of unit cell associated with 6-ring oxygens. Each 4.5 Cd2+ ion is recessed ca.0. 441 A Into the large cavity to complex either with Brsor with Br3from the (111) plane of 0(3), whereas each 1.5 Cd2+ ions recessed ca. 0.678 A into we sodalite unit. Approximately 1.5 Br5-and 1.5 Br3-ions are sorbed per unit cell. Each Brsion interacts and stabilized by complexing with two Cd2+ ions and framework oxide ions, while each Br3ion interacts with one Cd2+ ion and framework oxide ions. Because of residual water molecules the following reactions may be occurred inside of zeolite cavity:

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.69-76
• /
• 2003

Purpose: This study was designed to provide the data base for the diagnosis and treatment of the foot tumor by investigation of the clinical and pathological characteristics and distribution of the foot tumor. Materials and Methods: 142 foot tumors of 141 patients were studied. All patients were diagnosed with surgical biopsy. We investigated clinical and pathological characteristics and epidemiologic distribution of the foot tumor by reviewing the medical records and imaging materials. The location of the tumors were classified with zone of Kirby et al. Results: 75 patients were female and 66 were male. The average age of the patients was 33.2 years old. Benign soft tissue tumors were the most as 68 cases, and followed by 57 benign bone tumors, 12 malignant soft tissue tumors and 5 malignant bone tumors. Ganglia were the most in benign soft tissue tumors as 36 cases, subungual exostoses in benign bone tumors as 18, squamous cell carcinomas in malignant soft tissue tumors as 7, and metastatic lung cancers in malignant bone tumors as 2. The rate of pain complaints was the highest in malignant bone tumors, the duration of symptom was longest in benign soft tissue tumors, and the size of the tumor was the biggest in malignant bone tumors. Neurological symptoms were found in only 3 benign soft tissue tumors. For the zonal distribution, zone 5 was the most in 59 cases and zone 4 was the least as 10. The most numbers of the benign bone tumors located in zone 5, of benign soft tissue tumors in zone 1, of malignant bone tumors in zone 1 and 2, and of malignant soft tissue tumors in zone 5. The methods of surgical treatment included intralesional or marginal resection, curettage with or without bone graft, toe amputation, below knee amputation and limb salvage. Conclusion: The tumors of the foot were rare and various, and mostly benign (88%), but we can do proper treatment of those tumors without excluding malignant tumors by considering the age of patients, pain, duration of symptom, size of the tumors, and zonal distribution.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.149-163
• /
• 2006

The purpose of this study was to compare the lower extremity's joint and segment coupling patterns between forward and backward running in subjects who were twelve healthy males. Three-dimensional kinematic data were collected with Qualisys system while subjects ran to forward and backward. The thigh internal/external rotation and tibia internal/external rotation, thigh flexion/extension and tibia flexion/extension, tibia internal/external rotation and foot inversion/eversion, knee internal/external rotation and ankle inversion/eversion, knee flexion/extension and ankle inversion/eversion, knee flexion/extension and ankle flexion/extension, and knee flexion/extension and tibia internal/external rotation coupling patterns were determined using a vector coding technique. The comparison for each coupling between forward and backward running were conducted using a dependent, two-tailed t-test at a significant level of .05 for the mean of each of five stride regions, midstance(1l-30%), toe-off(31-50%), swing acceleration(51-70%), swing deceleration(71-90), and heel-strike(91-10%), respectively. 1. The knee flexion/extension and ankle flexion/extension coupling pattern of both foreward and backward running over the stride was converged on a complete coordination. However, the ankle flexion/extension to knee flexion/extension was relatively greater at heel-strike in backward running compared with forward running. At the swing deceleration, backward running was dominantly led by the ankle flexion/extension, but forward running done by the knee flexion/extension. 2. The knee flexion/extension and ankle inversion/eversion coupling pattern for both running was also converged on a complete coordination. At the mid-stance. the ankle movement in the frontal plane was large during forward running, but the knee movement in the sagital plane was large during backward running and vice versa at the swing deceleration. 3. The knee flexion/extension and tibia internal/external rotation coupling while forward and backward run was also centered on the angle of 45 degrees, which indicate a complete coordination. However, tibia internal/external rotation dominated the knee flexion/extension at heel strike phase in forward running and vice versa in backward running. It was diametrically opposed to the swing deceleration for each running. 4. Both running was governed by the ankle movement in the frontal plane across the stride cycle within the knee internal/external rotation and tibia internal/external rotation. The knee internal/external rotation of backward running was greater than that of forward running at the swing deceleration. 5. The tibia internal/external rotation in coupling between the tibia internal/external rotation and foot inversion/eversion was relatively great compared with the foot inversion/eversion over a stride for both running. At heel strike, the tibia internal/external rotation of backward running was shown greater than that of forward(p<.05). 6. The thigh internal/external rotation took the lead for both running in the thigh internal/external rotation and tibia internal/external rotation coupling. In comparison of phase, the thigh internal/external rotation movement at the swing acceleration phase in backward running worked greater in comparison with forward running(p<.05). However, it was greater at the swing deceleration in forward running(p<.05). 7. With the exception of the swing deceleration phase in forward running, the tibia flexion/extension surpassed the thigh flexion/extension across the stride cycle in both running. Analysis of the specific stride phases revealed the forward running had greater tibia flexion/extension movement at the heel strike than backward running(p<.05). In addition, the thigh flexion/extension and tibia flexion/extension coupling displayed almost coordination at the heel strike phase in backward running. On the other hand the thigh flexion/extension of forward running at the swing deceleration phase was greater than the tibia flexion/extension, but it was opposite from backward running. In summary, coupling which were the knee flexion/extension and ankle flexion/extension, the knee flexion/extension and ankle inversion/eversion, the knee internal/external rotation and ankle inversion/eversion, the tibia internal/external rotation and foot inversion/eversion, the thigh internal/external rotation and tibia internal/external rotation, and the thigh flexion/extension and tibia flexion/extension patterns were most similar across the strike cycle in both running, but it showed that coupling patterns in the specific stride phases were different from average point of view between two running types.

• The Journal of the Korean bone and joint tumor society
• /
• v.7 no.1
• /
• pp.13-19
• /
• 2001

Background : The incidence of malignant melanoma is currently increasing at a rate greater than any other cancer occuring in human. At this time, early diagnosis and surgical excision were the mainstay of treatment for patients with malignant melanoma. We reviewed the results of average 4 years of follow-up after surgical excision of total 16 cases of malignant melanoma since 1985. Materials and Methods : There were 16 patients (mean age 58.5 years, 5 men, 11 women). The site of the primary lesion was foot and toe (6), back (3), hand (2), thigh (2), shoulder (1), lower abdomen (1) and lip (1). The lymph node was involved at 9 patients. The histologic diagnosis was made with H-E, S-100 stain, and HMB-45 stain as a special stain. Results : Histologically, there were Clark's stage I for 3 patients, II in 4, III in 2, IV in 3, and stage V in 4 patients. The wide excision only greater than 2cm margin was performed for 4 patients. The wide excision and lymph node dissection were performed for 4 patients. The amputation was only performed for 3 patients, and the amputation and lymph node dissection were performed for 5 patients. After surgical excision, chemotherapy was done with Taxol for each 2 patients of stage IV and V. After long term follow-up for mean 4 years, 4 patients died related with melanoma, 1 patient was recurred, and 11 patients were cured. Conclusion : The incidence of malignant melanoma was rare in Korea, but early involvement of lymph node at initial diagnosis was found in many cases (9/16, 56%). And then, early detection and appropriated excision as well as careful dissection of adjacent lymph nodes will offer the patient the best chance for cure.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.266-270
• /
• 2005

The effect of the weight ratio of carbon source to nitrogen source on the growth and the composition change of fatty acids of Thraustochytrium aureum ATCC 34304 was investigated. The cell concentration of 5 days' culture increased and then decreased according to the increase of C/N, The ratioes for the maximum biomass were unique respectively and distributed between 1 and 4 with the initial sugar concentration in the range of 5 g/L to 25 g/L. The biomass yield, $Y_{x/s}$ decreased along with the increase of C/N, but maintained a constant value 0.35 between 10 and 20. The composition of myristic acid $(C_{14:0})$, one component of the lipid synthesized by T. aureum, was not affected with the change of C/N, but the composition of palmitic acid $(C_{16:0})$ was around $20\%$ below 4 of C/N and decreased to $15\%$ according to C/N about 4. The compositions of oleic acid $(C_{18:1})$ and linoleic acid $(C_{18:2})$ increased from 0 to $20\%\;and\;7\%$ respectively. The composition of $\gamma-linoleic$ acid $(C_{18:3})$, however, reduced from $5\%\;to\;2\%$. EPA $(C_{20:5})$ and DPA $(C_{22:5})$ showed a tendency of reduction in the weight composition according to the increase of C/N, but DHA $(C_{22:6})$ had a trend maintaining an approximately constant value, around $40\%$, irrespective of the change of C/N.

• Journal of Chest Surgery
• /
• v.43 no.2
• /
• pp.127-132
• /
• 2010

Background: Femoropopliteal artery bypss grafting is an effective form of treatment for infrainguinal artery occlusive disease in those patients who have either intermittent claudication or resting critical ischemia. The objective of this analysis was to evaluate the long-term patency of a femoropopliteal bypass graft that is classified as an above-the-knee saphenous vein graft or an above-the-knee PTFE (polytetrafluoroethylene) graft. Material and Method:From January 1998 to February 2005, 103 above-the-knee femoro-popliteal bypasses were performed on 87 patients. There were 74 male and 13 female patients with a mean age of $65.7{\pm}9.69$ (range: 31~82). The surgical indications were intermittent claudication in 65 cases (74.7%), foot ulceration in 2 cases (2.3%), foot necrosis in 10 ases (11.5%) and toe necrosis in 10 cases (11.5%). For the bypass graft, a reversed saphenous vein was used in 31 limbs and a polytetrafluoroethylene (PTFE) prosthesis was used in 72 limbs (6 mm: 27 limbs, 8 mm: 45 limbs). The perioperative risk factors were diabetes mellitus in 33 cases (37.9%), hypertension in 47 cases (54.0%), a history of ischemic heart disease in 13 cases (14.9%) and smoking in 72 cases (82.8%). Result:There were three perioperative deaths (3.4%) and seven late deaths (8.3%). Major leg amputation was necessary in 12 patients (13.8%) during the entire course of the study. The primary patency rate at 5 years for the vein grafts, the 8 mm-PTFE grafts and the 6 mm-PTFE grafts were 84.7%, 77.4% and 74.2%, respectively and the overall primary patency rate was 78.7%, and there were no significant statistical differences among the graft groups. By using multivariate analysis, the number of patent tibial arteries was determined to be a significant factor that influenced the primary graft patency rate (p<0.005), but risk factors such as diabetes mellitus, ischemic heart disease, smoking and age had no statistically significant affect on the primary graft patency rates. Conclusion: The great saphenous vein is considered the most durable conduit for infrainguinal revascularization, but the overall results of this study show that saphenous vein and PTFE grafts have comparable patency rates when used above the knee in patients with claudication or critical ischemia. The use of PTFE above the knee is a reasonable alternative for a femoro-poplitael bypass and it is associated with acceptable long term patency rates.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.1-8
• /
• 2007

PDiabetic neuropathy is one of the most common diabetes related complications including diabetic nephropathy and retinopahty. In clinical practices, nerve conduction velocity (NCV) has been used as a standard method for diagnosing diabetic neuropathy. However, it applies maximum current of 100mA to nerves causing stress and pain to patients. In this study, as a non-invasive method, $TcpO_2$ was utilized to investigate the difference and relationship between $TcpO_2$ and $SpO_2$ of normal and diabetic neuropathy subjects. In addition, a new method of diagnosing diabetic neuropathy using $TcpO_2$ is suggested. 50 normal subjects and 50 diabetic patients with neuropathy diagnosed by NCV participated in this study. Parameters used in this study were $TcpO_2$, $TcpCO_2$, and $SpO_2$. As a result of the $TcpO_2$ measurements, statistical significances were found from $TcpO_2$ of hands and feet from normal and patients group(p<0.01). $SpO_2$ measured from index finger of normal and patient groups showed no statistical significance(p>0.05). On the other hand, $SpO_2$ measured from great toes of normal and patient groups showed statistical significance(p<0.01). Correlation coefficient between $SpO_2$ of finger and $TcpO_2$ of hand was 0.400 (p<0.01) and $SpO_2$ of toe and $TcpO_2$ of foot was 0.471(p<0.01). Both correlation values were statistically significant. Sensitivities and specificities of the $TcpO_2$ method were found to be 66 % and 92 %, respectively. If the suggested $TcpO_2$ method is used periodically, prevention and early diagnosis of diabetic neuropathy would be possible.