• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.514-517
• /
• 2002

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (${\Delta}n$) and low cell gap d. The response time of TN cell on the rubbed PI surface was measured 5.1 ms. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing ${\Delta}nd$.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.808-811
• /
• 2002

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (Δn) and low cell gap d. The response time of TN cell on the rubbed PI surface was measured 5.1 ms. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing Δnd.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.439-442
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kinds of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost the same as that of no thermal stressed TN cells. However, the thermal stressed TN cells have many defects. Also, threshold voltage and response time of thermal stressed TN cells show the same performances as no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface shows decrease of characteristics as increasing thermal stress time. Therefore, the thermal stability of TN cell was decreased by high thermal stress for the long times.

• BMB Reports
• /
• 제54권7호
• /
• pp.374-379
• /
• 2021

Tetranectin (TN), an adipogenic serum protein, enhances adipocyte differentiation, however, its functional mechanism has yet to be elucidated. In the present study, we investigated the adipogenic function of TN by using medium containing TN-depleted fetal bovine serum (TN-del-FBS) and recombinant mouse TN (mTN). The adipocyte differentiation of 3T3-L1 cells was significantly enhanced by mTN supplementation essentially at differentiation induction, which indicated a potential role of the protein in the early differentiation phase. The adipogenic effect of mTN was more significant with insulin in the differentiation induction cocktail, implicating their close functional relationship. mTN enhanced not only the proliferation of growing cells, but also mitotic clonal expansion (MCE) that is a prerequisite for adipocyte differentiation in the early phase. Consistently, mTN increased the phosphorylation of ERK in the early phase of adipocyte differentiation. Results of this study demonstrate that the adipogenic function of mTN is mediated by enhancing MCE via ERK signaling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.9-12
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kind of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost same that of no thermal stressed TN cells. However, the thermal stressed TN cell have many defects. Also, threshold voltage and response time of thermal stressed TN cells show same performances of no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface show decrease of characteristics as increasing thermal stress time. Therefore, thermal stability of TN cell was decreased by high thermal stress for the long times.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.110-114
• /
• 2014

In this study, we report the doping effect of graphene quantum dots (QDs) in nematic liquid crystal (NLC) system on rubbed polyimide (PI) surface. The good LC alignment and high thermal stability in QD-LC cell system on rubbed PI surfaces can be measured. Also, the low threshold voltage of QD-TN cell was observed about 2.77 V. The fast response time of 13.2 ms for QD-TN cell can be achieved. Finally, the good voltage holding ratio of QD-TN cell on rubbed PI surface was measured.

• 한국광학회지
• /
• 제21권2호
• /
• pp.69-73
• /
• 2010

본 논문에서는 광학적으로 비등방성인 폴리머를 이용하여 $90^{\circ}$ TN(Twisted Nematic) 액정셀의 응답시간을 향상시키는 방법을 제안하였다. 액정과 비등방성 폴리머를 일정 비율로 혼합하여 TN 액정셀에 주입한 뒤 UV를 조사하여 폴리머 네트워크를 형성시킴으로써 투과율에 영향을 주지 않고 응답시간을 향상시킬 수 있다. 폴리머 네트워크가 형성되지 않은 TN 액정셀의 turn-off 시간이 16 ms인데 반해 제안된 방법에서는 액정과 비등방성 폴리머의 혼합 비율이 3, 5, 10 wt%로 증가할 때 12, 11, 9 ms로 고속 turn-off가 구현될 수 있다. 또한, turn-off 동작 시 TN 액정셀에서 발생하였던 delay time과 backflow가 폴리머 네트워크의 형성에 의해 크게 개선됨을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.498-501
• /
• 2003

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (${\Delta}n$) and low cell gap d. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing ${\Delta}nd$. The fast response time of TN cell using high birefringence with ${\Delta}nd=0.363$ on the rubbed PI surface was measured 5.1 ms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.210-213
• /
• 2004

We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.183-187
• /
• 1989

일반적으로 Mu phage를 가지고 있는 plasmid를 장내 세균에 삽입시키면 대부분의 Mu에 민감한 세균들은 zygotic induction이 일어나서 recipient cell 들이 살아남지 못하게 된다. 그러나 Mu 저항성 세균을 사용하면 cell이 죽지않고 recipient내에 삽입되는데 그 정확한 현상은 아직 밝혀지지 않았으나 Mu의 복제에 필요한 host의 기능이 결여된 것으로 추정되고 있다. 또한 reverse field electrophoresis를 사용하여 insertion mutant 나 deletion mutant들 의 염색체 및 거대 분자 DNA의 변이를 쉽게 비교 분석할 수가 있다. 본 실험에서는 Mu phage 저항성 C. crescentus를 사용하여 Tn5에 의한 영향 요구성 돌연변이주 출현률 및 운동성 돌연변이주 출현률을 조사한 결과 2%∼3% 수준으로 돌연변이가 일어났으며 이들 변이주들의 염색체를 Dra I 제한효소로 절단한 다음 reverse field electrophoresis로 분석한 결과 영양 요구성 돌연변이 균주들은 Tn5가 여러 위치에, 운동성에 돌연변이를 일으킨 균주들은 유사한 위치에 Tn5가 삽입된 것을 확인할 수 있었으나 hybridization 방법으로 확인한 것처럼 동시에 여러 위치를 확인할 수는 없었다. 그러나 이와 같은 문제들은 전기장의 교차시간 간격을 조절함으로 더 정확하게 확인할 수 있을 것으로 사료된다.