• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.47-54
• /
• 1987

A new method for designing air pollution monitoring newtork is presented in this study. In this method, the magnitudes and the correlation coefficients of predicted concentrations in each grid points are examined and the monitoring stations are assigned to those stations which cover the damage cost the most. This method was applied to the Ulsan-Onsan Industrial Complex. This method turned out to be much more efficient than the method of TM coordinates and the method of concentric circles prescribed in the Standard Methods for Pollution Measurement as well as the existing monitoring system established in the area. The 21 stations selected by the method of TM coordinates could cover only 64.4% of the damage cost in the area, the 16 stations by the method of concentric circles 72.1%, and the existing 21 stations 67.8%, while 11 stations were enough to cover 90% of the damage cost in the area with this method. It also was found that this method required only 24 stations to cover the entire area.

• Korean Journal of Remote Sensing
• /
• v.2 no.2
• /
• pp.107-116
• /
• 1986

A unique approach to access Landsat satellite imagery has been implemented on IBM PC microcomputer in order to generate image maps to be used as a substitute and/or supplement for a conventional topographic map. This method enables user to automatically: o extract a nominal image map, o geoencode or calibrate as an image map, and o create a multitemporal image file using CCTs containing precision processed Landsat MSS and TM images. These map extraction process includes: o location of map area in the selected CCT, o conversion of map coordinates to image coordinates, o extraction of map area, and o rotation of image to the true North/South and East/Weat direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1091-1094
• /
• 2004

High-luminous efficiency full-color emissions in photoluminescence (PL) were obtained in $GdVO_4$ phosphor thin films co-doped with various amounts of Eu, Er and/or Tm and postannealed at approximately 1000$^{\circ}C$. The $GdVO_4$:Eu,Er,Tm phosphor thin films were deposited on thick $BaTiO_3$ ceramic sheets by r.f. magnetron sputtering using powder targets and postannealed in an air atmosphere. The rare earth (RE) content (RE/(Gd+V+RE) atomic ratio) in the oxide phosphor thin films was varied in the range from 0.1 to 2 at.%. It was found that the excitation of $GdVO_4$:Eu.Er,Tm thin films is attributed to band-to-band transition. A white PL emission was obtained in a $GdVO_4$:Eu,Er,Tm thin film with Eu, Er and Tm contents of 0.2, 0.7 and 1 at.%, respectively: CIE chromaticity color coordinates. (X=0.352 and Y=0.351). In addition, a white emission was obtained in a thin-film electroluminescent (TFEL) device made with this thin film.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.183-188
• /
• 2001

Topographic map is important for the additional detailed construction planning followed by slope sliding. It is a base map that is used to compute the volume of soil, the cost of construction, and check the stability in the area of slope sliding. In this study, 3D topographic data were acquired appling softcopy photogrammetry to the dangerous slope, and the method which can transform these data to the same coordinates system as early TM coordinates was designed. There was a problem when the one meter contour line was made by analysing the image taken from the distance three hundred meters. By solving this problem, this could be used as important data for the planning of road expansion construction. It is expected to be useful for the measurement of various dangerous area in civil engineering works.

• Journal of Information Display
• /
• v.12 no.2
• /
• pp.93-96
• /
• 2011

Single-phased $CaZrO_3:Dy^{3+}$, $Tm^{3+}$ series have been successfully synthesized by solid-state reaction, and their luminescence properties were investigated. Under 355 nm excitation, $CaZrO_3:Dy^{3+}$ series showed characteristic emission of $Dy^{3+}$, which exhibited yellowish white color. By introducing $Tm^{3+}$ into the matrix, the emitted hue of the $Dy^{3+}$-doped sample could be easily tailored to white, and simultaneously, energy transfer from $Tm^{3+}$ to $Dy^{3+}$ was observed. The color coordinates of the optimum white-emitting sample were (0.321, 0.323), which were very close to the data of the National Television Standard Committee (0.33, 0.33). The co-activated phosphors presented good match to ultraviolet light-emitting diodes (LEDs), which revealed that they could be novel promising phosphors utilized in white LED application.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.757-763
• /
• 2016

$Ho^{3+}/Yb^{3+}/Tm^{3+}$ tri-doped $NaY_{1-x}(WO_4)_2$ phosphors with proper doping concentrations of $Ho^{3+}$, $Yb^{3+}$ and $Tm^{3+}$ ($x=Ho^{3+}+Yb^{3+}+Tm^{3+}$, $Ho^{3+}$=0.04, 0.03, 0.02, 0.01, $Yb^{3+}$=0.35, 0.40, 0.45, 0.50 and $Tm^{3+}$=0.01, 0.02, 0.03, 0.04) were successfully synthesized via the microwave sol-gel route, and their upconversion properties were investigated. Well-crystallized microcrystalline particles showed fine and homogeneous microcrystalline morphology with particle sizes of $1-2{\mu}m$. The optical properties were comparatively examined using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited white emissions based on blue, green and red emission bands, which correspond to the $^1G_4{\rightarrow}^3H_6$ transitions of $Tm^{3+}$ in the blue region, the $^5S_2/^5F_4{\rightarrow}^5I_8$ transitions of $Ho^{3+}$ in the green region, the $^5F_5{\rightarrow}^5I_8$ transitions of $Ho^{3+}$, and the $^1G_4{\rightarrow}^3F_4$ and $^3H_4{\rightarrow}^3H_6$ transitions of $Tm^{3+}$ in the red region. The pump power dependence of the upconversion emission intensity and the Commission Internationale de L'Eclairage chromaticity coordinates of the phosphors were evaluated in detail.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.269-275
• /
• 1997

Car Navigation System with Global Positioning System (GPS) can display position direction and the shortest cut of one's destination. The position datum for GPS in World Geodetic System 1984 (WGS-84) coordinates system need to transform Bessel coordinates system and process Map projection. Since 1987, GPS has used the WGS-84. WGS-84 is a geocentric equipotential ellipsoid of revolution which is defined four parameters. In this study, by comparing the digitized topographical map with the digital map of GPS datum we can consider the technique of WGS84 digital map.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.309-315
• /
• 2003

This study is aimed to research the precise and efficient method for coordinate transformation. In Korea, it is necessary to convert existing digital maps in TM coordinates to that in KTRF from 2007. In this study, coordinate transformation methods and conversion area are tested and analyzed. In the results of experiment, it shows that Affine method is preciser than Helmert method. But Affine method is have more distortion than Helmert method.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.73-76
• /
• 2007

The Global Positioning System(GPS)is an advanced navigation satellite system for determination to position. It can provide three-dimensional positioning, in dependent of weater, 24 hours per day. This paper described the Field DGPS program Using PDA can help a field work and compute the TM rectangular coordinates, compared the output of the Field DGPS program with the results of surveying using EDM(electronic distance measurement).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.149-158
• /
• 1998

The aim of this paper is to propose the technique of the two dimensional geodetic coordinates conversion between WGS84 and Bessel spheroids by the two-dimensional affine transformation modeling based on the UTM plane coordinates without the local geoid model which is essential to three dimensional coordinates conversion. Area of approximately $25\times{11}$ square km in the city of Inchon was selected as the test area. The transformation parameters were determined using the eleven triangulation control points in test area. And then, those paraneters were applied to the fifteen cadastral control points which selected as checking points for precision checking of transformation parameters. The average and standard deviations of the absolute values of the conversion residuals of checking points in latitude/longitude and N/E(UTM) and/or x/y(TM) are $\pm0.006"$$\pm0.013"$ and $\pm{17cm/}\pm{30cm}$ respectively. Also, coefficients for 7-parameters, 3-parameters and UTM model transformation computed according as sizes of transformed area, and then the transformed characteristics of checking points according to transformation methods analyzed synthetically.hetically.