• Transactions on Electrical and Electronic Materials
• /
• v.7 no.4
• /
• pp.173-179
• /
• 2006

Due to the limitations of the channel length, the lateral spread for two-dimensional impurity distributions is critical for the analysis of devices including the integrated complementary metal oxide semiconductor (CMOS) circuits and high frequency semiconductor devices. The developed codes were then compared with the two-dimensional implanted profiles measured by transmission electron microscope (TEM) as well as simulated by a commercial TSUPREM4 for verification purposes. The measured two-dimensional TEM data obtained by chemical etching-method was consistent with the results of the developed analytical model, and it seemed to be more accurate than the results attained by a commercial TSUPREM4. The developed codes can be applied on a wider energy range $(1KeV{\sim}30MeV)$ than a commercial TSUPREM4 of which the maximum energy range cannot exceed 1MeV for the limited doping elements. Moreover, it is not only limited to diffusion process but also can be applied to implantation due to the sloped and nano scale structure of the mask.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.948-952
• /
• 2001

Periodic mesoporous organosilicas with rope-based morphology from a reaction gel composition of 1 BTME : 0.57 ODTMABr : 2.36 NaOH : 353 H2O were synthesized. While long rope-shaped product dominated in case of static synthesis condition , gyroid type products instead of rope shaped product appeared and rope shaped product disappeared with agitation. PMO with such a long rope shaped morphology is firstly reported. Additionally, various rope-based morphologies depending on the degree of bending, twisting, folding and winding of rope such as spirals, discoids, toroids, and worm-like aggregates were observed. White powdered products were characterized by X-ray diffraction, N2 sorption measurement, SEM and TEM. From XRD pattern and TEM image, ODTMA-PMO with hexagonal symmetry was identified. The pore diameter and BET surface area of ODTMA-PMO are $32.9{\AA}$ and 799 m2g-1 , respectively. Hexagonally arrayed channels run with long axis of rope and rope-based shapes with various degree of curvature, which was elucidated by using TEM images.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.172-172
• /
• 2009

In this study, we presented comparative discrimination methods to identify various line and planar defects observed in nonpolar a-GaN epilayers on r-sapphire substrates. Unlike the case of conventional c-GaN, which is dominated by perfect threading dislocations, systematic identification of undistinguishable defects using transmission electron microscopy (TEM) is necessary to suppress the propagation of defects in nonpolar GaN epilayers. Cross-sectional TEM images near the [0001] zone axis revealed that perfect mixed and pure screw type dislocations are visible, while pure edge, partial dislocations, and basal stacking faults (BSFs) are not discernible. In tilted cross-sectional TEM images along the [$1\bar{2}10$] zone axis, the dominant defects were BSFs and partial dislocations for the $g=10\bar{1}0$ and 0002 two-beam images, respectively. From plan view TEM images taken along the [$11\bar{2}0$] axis, it was found that the dominantpartial and perfect dislocations were Frank-Shockley with b=${\pm}1/6$<$20\bar{2}3$> and mixed type without an 1 component including b=${\pm}1/3$<$1\bar{2}10$> and ${\pm}1/3$<$\bar{2}110$>, respectively. Prismatic stacking faults were observed as inclined line contrast near the [0001] zone axis and were visible as band contrast in the two-beam images along the [$1\bar{2}10$] and [$11\bar{2}0$] zone axes.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.48-53
• /
• 2007

Pulverization characteristics of H-kenyaite in vibration mill and exfoliation property in epoxy of pulverized H-kenyaite was investigated by using XRD, SEM, TEM. and particle size analyzer. Pulverization was conducted for 0.5~5 h. The particle morphology of sample pulverized for 1 h preserved plate-shape. However, this plate-shape disappeared in the sample pulverized for 3 h. The XRD pattern of sample pulverized for 1 h showed the characteristic peak of H-kenyaite. However, the peak disappeared in samples pulverized above 3 h, indicating severe destruction of H-kenyaite structure. TEM analysis for the kenyaite/epoxy nanocomposites exhibited only gallery expansion of 3~5 nm in non-pulverized sample, but dramatical large expansion of 5~10 nm in the samples pulverized during 1 h. This results confirm that the pulverization of wide plates composed of H-kenyaite particle have largely affect on the formation of an exfoliated kenyaite-polymer nanocomposite.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.575-580
• /
• 2015

Pd/C catalysts were prepared by various preparation methods such as ion exchange, impregnation and polyol method and also characterized by nitrogen adsorption-desorption isothermal, XRD, FE-TEM and CO-chemisorption. The activities of these catalysts were tested in the hydrogenation of cyclohexene to cyclohexane. Catalytic activities of Pd/C catalysts were found to be effected by the chosen preparation methods. Pd dispersions of each Pd/C catalysts prepared by ion exchange, impregnation and polyol method were 17.55, 13.82% and 1.35%, respectively, confirmed by CO-chemisorption analysis. These were also in good agreement with the FE-TEM results. The Pd/C catalyst prepared by ion exchange method exhibits good performance with the cyclohexene conversion rate of 71% for 15 min. These results indicate that Pd/C catalyst having higher dispersion and lower particle size is in favor of hydrogenation cyclohexene and also Pd dispersion increases with the increment of catalytic activity.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.6
• /
• pp.889-895
• /
• 2006

To investigate the antibiotic-resistant patterns and the gene types of extended-spectrum $\beta$-lactamase (ESBL)-producing Klebsiella pneumoniae, we collected 226 Klebsiella pneumoniae strains from three general hospitals with more than 500 beds in Busan, Korea from September 2004 to October 2005, The minimum inhibitory concentration (MIC) of antibiotics was measured using the Gram-negative susceptibility (GNS) cards of Vitek (Vitek system, Hazelwood Inc., MO, U.S.A.). Of the 226 K, pneumoniae isolates, 65 ESBL-producing K. pneumoniae strains were detected by the Vitek system and confirmed by the double-disk synergy test. TEM (Temoniera) type, SHV (sulfhydryl variable) type, and CTX-M (cefotaxime) type genes were detected by polymerase chain reaction. All 65 K. pneumoniae strains were resistant to ampicillin, cefazolin, cefepime, ceftriaxone, and aztreonam, and 83.0% of the organisms were resistant to ampicillin/sulbactam, 66.1% to tobramycin, 67.6% to piperacillin/tazobactam, 61.5% to ciprofloxacin, and 47.6% to trimethoprim/sulfamethoxazole, and 43.0% to gentamicin. TEM-type ESBLs (TEM-1 type, -52 type) were found in 64.6% (42 of 65) of the isolates, SHV-type ESBLs (SHV-2a type, -12 type, -28 type) in 70.7% (46 of 65) of isolates, and CTX-M-type ESBLS (CTX-M-15 type) in 45% (29 of 65) of isolates. Of the 65 ESBL-producing K. pneumoniae strains, two strains were found to harbor blaSHV-28, which were detected in Korea for the first time. Therefore, more investigation and research on SHV-28 are needed in order to prevent the ESBL type-producing K. pneumoniae from spreading resistance to oxyimino cephalosporin antibiotics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1400-1407
• /
• 2001

The size distributions of electrospray droplets from the Taylor cone in cone-jet mode are directly measured by using a freezing method and a transmission electron microscope (TEM) image processing technique. These results are compared with the data obtained by an aerodynamic size spectrometer (TSI Aerosizer DSP). The use of glycerol seeded with NaI and a freezing method make it possible to sample droplets with their original sizes preserved. Since pictures of droplets are taken with TEM with very low vapor pressure of the solution, evaporation is suppressed by freezing. For liquid flow rates below 1 nl/sec, the measured droplet diameters by the TEM image processing technique and the aerosizer are in the range of 0.25 to 0.32 m add 0.3B to 0.40m, respectively. Comparing the TEM data with the aerosizer measurements, it has been revealed that the TEM image processing technique can afford more accurate values of droplet size distributions in the submicron range of 0.1 to 0.4m.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.2
• /
• pp.177-187
• /
• 2004

Measurements of the lattice parameters of albite and oligoclase from electron diffraction patterns with the Au internal standard resulted in errors of less than 1 %. An electron diffraction map for natural oligoclase samples was constructed and 11 stations of zone-axes diffraction patterns were obtained. This process is indispensible for reliable TEM studies of triclinic feldspars. Utilizing the [001] cleavage plane of feldspar and the double-tilting TEM holder the following information is obtainable: Si-Al ordering and chemistry of alkali feldspars could be estimated from the $\alpha$＊ - ＊ plot, where ＊ is measured from the [001] orientation, while $\alpha$＊ is measured from the [100] orientation. Si-Al ordering of Na-rich plagioclase could be estimated from ＊ [001] patterns. Structure and chemistry or Na-poor plagioclase could be estimated from existence of e-reflections, their intensity variations as well as their positional changes.

• Korean Journal of Veterinary Research
• /
• v.52 no.2
• /
• pp.133-139
• /
• 2012

Antimicrobial resistance is one of the most concerns in pig industry. Escherichia (E.) coli have been used for the indicator to monitor the antimicrobial resistance. In this study, 321 E. coli from diarrheic and non-diarrheic piglets were tested for antimicrobial resistance and frequency of $Bla_{TEM}$. In non-diarrheic piglets, they were resistant to oxytetracycline (93%), streptomycin (92%) and sulfadiazine (90%) but susceptible to ceftiofur (99%), colistin (97%), and enrofloxacin (82%). The isolates from diarrheic piglets were resistant to enrofloxacin (72.9%), ceftiofur (17.6%), and colistin (11.3%), whereas the resistance was 1%, 18% and 3% in case of non-diarrheic piglets, respectively. The resistance for amoxicillin/clavulanic acid (54.1%) and ceftiofur (22%) was high in isolates from post-weaning piglets. The resistance for colistin was 15.2% in nursery piglets. Seventy-three percent of isolates from diarrheic piglets showed high multidrug resistance profile (more than 13 antimicrobials) compared to those from non-diarrheic pigs in which 71% of isolates showed moderate multidrug resistance profile (7 to 12 antimicrobials). The frequency of $Bla_{TEM}$ in E. coli from non-diarrheic and diarrheic piglets was 57% and 69%, respectively. The results might provide the basic knowledge to establish the strategies for treatment and reduce antibiotic resistance of E. coli in piglets.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.265-274
• /
• 1999

The microstructure of Cu thin films in various deposition conditions was characterized. Cr films (50 nm thick) and Cu films (500 or 1000 nm thick) were deposited on polyimide films by DC magnetron sputtering. The Ar pressure during Cu deposition was controlled to 5, 50 and 100 mtorr. The microstructure was characterized using conventional and high resolution SEM and TEM. As sputtering pressure increases, open boundaries are observed more frequently. The Cu film deposited at 5 mtorr has a dense and uniform structure, while low-density regions or open boundaries between columns exist in the film deposited at higher pressure. As the film grows thicker, open boundaries are wider and the density of open boundaries are higher. The comparison between SEM and TEM show that the small features shown in high resolution SEM are grains. High resolution SEM is very effective to characterize the microstructure of the thin films. One column in the films deposited at 50 and 100 mtorr consists of several grains, which are smaller than those deposited at 5 mtorr.