• YAKHAK HOEJI
• /
• v.39 no.3
• /
• pp.276-282
• /
• 1995

Compared to the first and second-generation cephalosporins, the third-generation cephalosporins are remarkably stable against hydrolysis by the $\beta$-lactamases produced by aerobic gram-negative bacilli, such as Enterobacteriaceae. Among these bacteria, the most prevalent plasmid-encoded $\beta$-lactamase is TEM-1 $\beta$-lactamase belonging to class A or group 2b. This enzyme is produced constitutively and is principally active against peniciflins and old cephalosporins rather than third-generafion cephalosporins, carbapenems and mmobactams. However, new TEM type $\beta$-lactamases including TEM-9 and TEM-12 evolved through point mutations in a gene encoding $\beta$-lactamase have been discovered from patients during chemotherapy. These $\beta$-lactamases are known to be capable of hydrolyzing most of the third-generatim cephalosporins. To study the prevalence of $\beta$-lactamases from clinical isolates collected in Korea. the minimal inhibitory concentratims(MICs) of several third-generation cephalosporins against 628 clinical isolates were determined by agar dilution methods, and $\beta$-lactamas-producing bacteria were isolated by use of cefinase disc. By polymerase chain reaction (PCR) method, clinical isolates harboring a gene for TEM type $\beta$-lactamase were identified among the $\beta$-lactamase producing strains. Twentiy three percent of the clinical isolates was resistant to the thirdgeneration cephalosporins, and more than 90% of resistant cells produced various $\beta$-lactamases. TFM type $\beta$-lactamases were dominant in gram-negative bacilli, such as Escherichia coli, Klebsiella pneumoniae, Enterobacter species. These results suggest the necessity of the development of new cephalosporins which are stable against $\beta$-lactamases like TEM.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.11
• /
• pp.975-983
• /
• 1998

A duplexer filter operating at 1.9 GHz band for personal communication system is designed and fabricated using $lambada$/4 TEM mode dielectric resonator. The transmitting band pass filter is designed in the type of the elliptic function band rejection filter by 3 dielectric resonators with 5 additional capacitors and 3 inductors. The receiving band pass filter is designed by 3 dielectric resonators with 5 additional capacitors which give additional series resonance. The parameters which are evaluated by design theory are practically applied to the duplexer filter construction and the simulation.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.3
• /
• pp.29-34
• /
• 2018

To present the design direction of the thermoelectric module (TEM) refrigerator, analysis of the effect of the design parameters on the energy efficiency and performance of the refrigerator is performed. The design parameters considered are the cooling capacity of the TEM and the heat transfer performance of the heating and cooling surface of the TEM. The heat transfer performance is the most effective design parameter for improving cooling power. The smaller ΔT and cooling capacity of the TEM make the higher efficiency of the refrigerator.

• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.74-82
• /
• 1991

This study is to investigate the distribution of the radiation force exerted on a homogeneous sphere by two circularly-polarized counterpropagating $TEM_{00}$ laser beams. The time-averaged expressions of the rediation force are derived for both cases of two interfering $TEM_{00}$ laser beams and a standing plane electromagnetic wave. The radiation force is numerically calculated and the physical interpretations of computed results are presented. The results in this paper will be useful in the optical levitation experiment using two counterpropagating $TEM_{00}$ laser beams or a standing plane electomagnetic wave.

• Journal of Microbiology
• /
• v.43 no.2
• /
• pp.172-178
• /
• 2005

To determine the prevalence and genotypes of $\beta$-lactamases among clones of a metagenomic library from the cold-seep sediments of Edison seamount (10,000 years old), we performed pulse-field gel electrophoresis, antibiotic susceptibility testing, pI determination, and DNA sequencing analysis. Among the 8,823 clones of the library, thirty clones produced $\beta$-lactamases and had high levels of genetic diversity. Consistent with minimum inhibitory concentration patterns, we found that five ($167\%$) of thirty clones produced an extended-spectrum $\beta$-lactamase. 837- and 259-bp fragments specific to bla$_{TEM}$ genes were amplified, as determined by banding patterns of PCR amplification with designed primers. TEM­1 was the most prevalent $\beta$-lactamase and conferred resistance to ampicillin, piperacillin, and cephalothin. TEM-116 had a spectrum that was extended to ceftazidime, cefotaxime, and aztreonam. The resistance levels conferred by the pre-antibiotic era alleles of TEM-type $\beta$-lactamases were essentially the same as the resistance levels conferred by the TEM-type alleles which had been isolated from clinically resistant strains of bacteria of the antibiotic era. Our first report on TEM-type $\beta$-lactamases of the pre-antibiotic era indicates that TEM-type $\beta$-lactamases paint a picture in which most of the diversity of the enzymes may not be the result of recent evolution, but that of ancient evolution.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.293-297
• /
• 2015

Focused ion beam (FIB) technique is widely used in the precise preparation of thin slices for the transmission electron microscopic (TEM) observation of target area of the minerals and geological materials. However, structural damages and artifacts by the Ga ion beam as well as electron beam damage are major difficulties in the TEM analyses. TEM analyses of the mineral samples showed the amorphization of quartz and feldspar, curtain effect, and Ga contamination, particularly near the grain edges and relatively thin regions. Although the ion beam damage could be much reduced by the improved procedures including the adjustment of the acceleration voltage and current, the ion beam damage and contamination are likely inevitable, thus requiring careful interpretation of the micro-structural and micro-chemical features observed by TEM analyses.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.165-175
• /
• 1996

Fourteen(14) large commercial buildings located in Seoul with friable sprayed-on surface insulation material on ceiling were investigated for fiber types in bulk material and for airborne fiber concentrations in buildings by transmission electron microscopy (TEM) in order to compare the results with those by polarized light microscopy (PLM) and phase contrast microscopy (PCM). The results were as follows: 1. Chrysotile asbestos was found in one bulk sample out of total 14 bulk samples collected. Glass fiber and mineral wool were the two major constituents of the bulk samples. 2. The Na-Mg-Si-Ca-Fe-Al ratios of the EDX spectra which were normalized with the Si peak were 0-1.0-10-8.3-4.0-4.0 in mineral wool and 0-5-10-21-0-0 in chrysotile asbestos, respectively. 3. Airborne fiber concentrations were log-normalcy distributed and the geometric mean (geometric standard deviation) fiber concentrations by TEM in the underground parking lots and inside buildings were 0.0048 f/cc(1.93) and 0.0040 f/cc(2.27), respectively with no statistical difference. In the outdoor ambient air, statistically significantly lower concentration of 0.0018 f/cc(2.04) was measured. 4. The TEM/PCM ratios of airborne fiber concentrations ranged 0.5 - 2.0 for 80 % of airborne samples analyzed, end the regression equation between TEM and PCM was PCM=-0.2724+1.1355(TEM) with the coefficient of determination $R^2=0.52$. The results of this study confirmed that the sprayed-on surface insulation material found in some commercial buildings may possibly be contaminated with asbestos fiber. Since statistically significant relationship of fiber concentrations measured by PCM and TEM inside buildings and ambient air was found, previous results by PCM in ambient air could be used to estimate the ambient fiber concentrations in knowing the ratio of TEM/PCM.

• The Journal of Korean Medicine
• /
• v.45 no.3
• /
• pp.76-90
• /
• 2024

Objectives: The purpose of this study is to summarize the etiology, diagnosis and treatment of pelvic congestion syndrome(PCS) in traditional East-Asian medicine(TEM) and Western medicine(WM) from the point of blood stasis. Methods: We followed the methodology of 5 steps of scoping review by Arksey and O'Malley and Levac et al. Studies from 2010 to October 19, 2023 were searched through seven search engines. Two reviewers independently searched and screened the studies. When there was a disagreement, a third reviewer decided its eligibility. Results: A total of 78 studies were selected, and 40 were TEM studies and 38 were WM. The average age of the study subjects was in their 30s and most had more than one child. Most of TEM were intervention studies and WM were mostly observational studies. In the WM, the etiology of PCS was considered pelvic venous insufficiency, and in the TEM, pathological conditions caused blood stasis in the pelvis. In TEM, the diagnosis was made according to previous studies' criteria; in WM, it was made through imaging. To treat PCS, WM seeks to block extended veins with embolization, and TEM to improve the environment in which stagnant blood is created through various treatments such as herbal medicine, enema therapy, etc. Total efficient rate (TER) in TEM and imaging findings in WM were most often used as outcome measures. Conclusions: This study summarized and analyzed overall concepts of PCS in TEM and WM.

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.825-830
• /
• 2003

Structural changes during oxidation of anisotopic mesophase carbon fiber(AMCFs) have been observed with TEM and XRD. It was shown that the AMCFs are three dimensionally stacked structure of turbostratic layers, and are non-homogeneous structure which consist of the highly ordered areas and the random areas. The $d_{ 002}$, Lc, and La of AMCFs which were measured by XRD were 3.44, 146, and $135\AA$, respectively. It was observed that the oxidation initiated at the random areas, because the $d_{002}$ / decreased to the value of 3.41 $\AA$ during initial oxidation stage. It was also observed that the La of the oxidized AMCFs increased up to 182 $\AA$ during the whole oxidation process, and the $d_{002}$ of that increases up to 9.44 $\AA$ when the burn-off is over the degree of 20%. Therefore, it was suggested that the micro-crystalline grew up by heat treatment effects during the fibers were oxidized, In addition, it was shown that there was difference in the measured value of La by XRD and TEM, in case of 39% oxidized fibers for example, the measured La was $ 165\AA$ by XRD and in the range of 180∼220 $\AA$ by TEM.

• Korean Journal of Veterinary Service
• /
• v.37 no.4
• /
• pp.225-231
• /
• 2014

In this study, 185 cefotaxime-resistant Escherichia coli were isolated from different stages of a wastewater treatment plant (WWTP) in Daegu in Korea. Among them, 99.5% (184 isolates) originated from raw sewage and 0.5% (1 isolates) from the final effluent. Cefotaxime-resistant E. coli were high resistant to ampicillin, piperacillin, cefazolin, cephalothin, cefachlor and cefamandole (99.5~100%). About 93% of the cefotaxime-resistant E. coli were extended-spectrum ${\beta}$-lactamases (ESBL)-producing E. coli. The $bla_{TEM+CTX}$ gene was the most predominant of the ESBL genes (72.5%), followed by $bla_{CTX-M}$ (16.2%), $bla_{TEM}$ (8.7%), $bla_{TEM+CTX+SHV}$ (1.1%), $bla_{TEM+SHV}$, $bla_{TEM+OXA}$, and $bla_{TEM+CTX+SHV}$ (respectvely 0.5%). Class 1 and 2 integron were found in 49.7% and class 3 integron was not found. All of integron positive isolates were multiresistant (i.e. resistant to four or more antibiotics). Our findings showed WWTP is contaminated with antibiotic resistant bacteria with resistance genes.