• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2379-2386
• /
• 2020

This paper presents the results of the first intercomparison exercise performed by the Korea retrospective dosimetry (KREDOS) working group using electron paramagnetic resonance (EPR) spectroscopy. The intercomparison employed the alanine dosimeter, which is commonly used as the standard dosimeter in EPR methods. Four laboratories participated in the dose assessment of blind samples, and one laboratory carried out irradiation of blind samples. Two types of alanine dosimeters (Bruker and Magnettech) with different geometries were used. Both dosimeters were blindly irradiated at three dose levels (0.60, 2.70, and 8.00 Gy) and four samples per dose were distributed to the participating laboratories. Assessments of blind doses by the laboratories were performed using their own measurement protocols. One laboratory did not participate in the measurements of Magnettech alanine dosimeter samples. Intercomparison results were analyzed by calculating the relative bias, E_n value, and z-score. The results reported by participating laboratories were overall satisfactory for doses of 2.70 and 8.00 Gy but were considerably overestimated with a relative bias range of 10-95% for 0.60 Gy, which is lower than the minimum detectable dose (MDD) of the alanine dosimeter. After the first intercomparison, participating laboratories are working to improve their alanine-EPR dosimetry systems through continuous meetings and are preparing a second intercomparison exercise for other materials.

• Journal of Plant Biology
• /
• v.37 no.4
• /
• pp.445-452
• /
• 1994

Effects of methyl jasmonate (MeJA) on ethylene production in mungbean (Phaseolus radiatus L.) hypocotyl and leaf segments were studied. Ethylene production in mungbean hypocotyl segments was decreased in proportion to MeJA concentrations and $450\;\mu\textrm{M}$ of MeJA showed 50% inhibitory effect. This inhibitory effect appeared after 3 h of incubation period and continued for 24 h. Inhibition of ethylene production by MeJA was due to the decrease in 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase activity. However, MeJA treatment had no effect on ACC content and ACC synthase activity. MeJA also inhibited auxin-induced ethylene production in hypocotyls. To investigate the mechanisms of the inhibitory effect of MeJA on the auxin-induced ethylene production, ACC synthase and ACC oxidase activity were examined after MeJA treatment. MeJA decreased the ACC content and ACC synthase activity as weD as ACC oxidase activity in the auxin-treated tissue. These results suggest that the inhibition of MeJA on auxin-induced ethylene production is not due to the direct inhibitory effect of MeJA on the ACC synthase, but to the inhibition of the ability of IAA to promote the synthesis of ACC synthase. In contrast, ethylene production from the detached mungbean leaves was stimulated by MeJA. The rate of ethylene production increased approximately 65% over the control after 12 h of incubation period by $4.5\;\mu\textrm{M}$ MeJA. When MeJA was applied to detached leaves along with IAA, the effect of MeJA appeared to be additive. In an effort to elucidate mechanisms of MeJA action on auxin-induced ethylene production in the leaf tissue, enzyme activities of ACC synthase and ACC oxidase were examined. MeJA stimulated ACC oxidase activity but did not affect ACC synthase activity in leaf tissue. Together, these results suggest that MeJA plays different roles in the ethylene production in the different mungbean tissues.issues.

• Archives of design research
• /
• v.17 no.4
• /
• pp.119-128
• /
• 2004

There is a lack of user centered design methods that support effective collaboration between designers and end-users for designing hardware and software integrated digital products. This paper presents the application of Collaborative Design and a new collaborative design prototyping tool for interactive digital product design projects. The tool consists of STCtools(State Transition Chart tools) software, hardware modeling materials, and physical interface toolkits for integrating software and hardware. STCtools allow users to create and edit States, to compose Events describing transitions between States, and to run intermediate or final results of STC. Using the hardware modeling materials and the physical interface toolkit, designers and end-users can collaborately examine the hardware and software integrated concepts in an early stage of the design process. Three collaborative design workshops of designing a portable digital guide for a theme park were accomplished to examine the feasibility of the tool. The results suggested that the tool supported iterative concept development and interactions between designers and end users. Although several user interface problems of STCtools were identified, the participants gave positive feedback on the role of the tool in collaborative concept generation and deployment. It is expected that the results of this study contribute not only to the collaboration between designers and end users, but also to the collaboration between designers, and between designers and other professionals.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.168-175
• /
• 2017

In this paper, a 5V small-area NMOS-diode eFuse OTP memory cell is proposed. This cell which is used in PMICs consists of a 5V NMOS transistor and an eFuse link as a memory part, based on a BCD process. Also, a regulated voltage of V2V ($=2.0V{\pm}10%$) instead of the conventional VDD is used to the pull-up loads of a VREF circuit and a BL S/A circuit to obtain a wider operational voltage range of the eFuse memory cell. When this proposed cells are used in the simulation, their sensing resistances are found to be $15.9k{\Omega}$ and $32.9k{\Omega}$, in the normal read mode and in the program-verify-read mode, respectively. Furthermore, the read current flowing through a non-blown eFuse is restricted to $97.7{\mu}A$. Thus, the eFuse link of a non-blown eFuse OTP memory cell is kept non-blown. The layout area of the designed 1kb eFuse OTP memory IP based on Dongbu HiTek's BCD process is $168.39{\mu}m{\times}479.45{\mu}m(=0.08mm^2)$.

• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.266-271
• /
• 2011

A reflection-type fiber-optic pH sensor, which is composed of a pH sol-gel film, plastic optical fibers, a mirror, a light source and a spectrometer, is developed in this study. As pH indicators, a bromthymol blue, a cresol red and a thymol blue are used, and they are immobilized in the sol-gel films. The emitted light from a light source is guided by a fiber-optic Y-coupler and plastic optical fibers to the pH sol-gel film in a pH sensing probe. The pH change in the sensing probe gives rise to a change in the color of the pH sol-gel film, and the optical characteristic of reflected light through the pH sol-gel film is also changed. Therefore, we have measured the spectra of reflected lights, which are changed according to the color variations of the pH sol-gel films with different pH values, by using of a spectrometer. Also, the relationships between the pH values and the intensities of reflected lights are obtained on the basis of the color variations of the pH sol-gel films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1802-1809
• /
• 2009

Abstract The typical distribution systems have the power flow from distribution substations (sources) to customers (load) only as one direction. However, in the case where distributed generations (DG) such as PV system and wind power systems are connected to distribution systems, the DG output variations to distribution systems, so called reverse power flow, may cause the bi-directional power flow. So, the reverse power flow has severe impacts on typical power system, for example power quality problems, protection coordination problems, and so on. Especially, protection devices (sectionalizer) in primary feeder of distribution system interconnected with distributed generations may cause problems of malfunction, and then many customers could have problems like an interruption. So, this paper presents the bi-directional operation algorithm of protection devices to overcome the problems like mal-function. And, also this paper shows the effectiveness of proposed method by using both PSCAD/EMTDC software and test facility of protection devices to simulate the field distribution systems.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.167-179
• /
• 2021

In order to characterize the mixing process of confluence for understanding the impacts of a river on the other river, it has been crucial to analyze the spatial mixing patterns for main streams depending on various inflow conditions of tributaries. However, most conventional studies have mostly relied upon hydraulic or water quality numerical models for understanding mixing pattern analysis of confluences, due to the difficulties to acquire a wide spatial range of in-situ data for characterizing mixing process. In this study, backscatters (or SNR) measured from ADCPs were particularly used to track sediment mixing assuming that it could be a surrogate to estimate the suspended sediment concentration. Raw backscatter data were corrected by considering the beam spreading and absorption by water. Also, an optical Laser diffraction instrument (LISST) was used to verify the method of acoustic backscatter and to collect the particle size distribution of main stream and tributary. In addition, image-based spatial distributions of sediment mixture in the confluence were monitored in various flow conditions by using an unmanned aerial vehicle (UAV), which were compared with the spatial distribution of acoustic backscatter. As results, we found that when acoustic backscatter by ADCPs were well processed, they could be proper indicators to identify the spatial patterns of the three-dimensional mixing process between two rivers. For this study, flow and sediment mixing characteristics were investigated in the confluence between Nakdong and Nam river.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.338-347
• /
• 2021

In this paper, the beta-ray sensor circuit used in the true random number generator was designed using DB HiTek's 0.18㎛ CMOS process. The CSA circuit proposed a circuit having a function of selecting a PMOS feedback resistor and an NMOS feedback resistor, and a function of selecting a feedback capacitor of 50fF and 100fF. And for the pulse shaper circuit, a CR-RC2 pulse shaper circuit using a non-inverting amplifier was used. Since the OPAMP circuit used in this paper uses single power instead of dual power, we proposed a circuit in which the resistor of the CR circuit and one node of the capacitor of the RC circuit are connected to VCOM instead of GND. And since the output signal of the pulse shaper does not increase monotonically, even if the output signal of the comparator circuit generates multiple consecutive pulses, the monostable multivibrator circuit is used to prevent signal distortion. In addition, the CSA input terminal, VIN, and the beta-ray sensor output terminal are placed on the top and bottom of the silicon chip to reduce capacitive coupling noise between PCB traces.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.71-84
• /
• 2021

Since small and medium-sized enterprises fell short of the securement of technological competitiveness in the field of big data and artificial intelligence (AI) field-core technologies of the Fourth Industrial Revolution, it is important to strengthen the competitiveness of the overall industry through technology commercialization. In this study, we aimed to propose a priority related to technology transfer and commercialization for practical use of public research results. We utilized public research performance information, improving missing values of 6T classification by deep learning model with an ensemble method. Then, we conducted topic modeling to derive the converging fields of big data and AI. We classified the technology fields into four different segments in the technology portfolio based on technology activity and technology efficiency, estimating the potential of technology commercialization for those fields. We proposed a priority of technology commercialization for 10 detailed technology fields that require long-term investment. Through systematic analysis, active utilization of technology, and efficient technology transfer and commercialization can be promoted.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.224-230
• /
• 1981

Threshing forces of seven varieties, that is, three Japonica type varieties-Irri 348, Irri 345, and Milyang 15, and four Indica type varieties-Milyang 23, Irri 342, Suweon 294 and Suweon 287-, which have been cultivated in the standard fertilization field being at Chungnam Provincial Office of Rural Development, Youseong, Chungnam-do, they were measured every other day in the period from September 28 to October 20 which were included the proper harves ting time. Also the threshing forces were checked in three-dimensional directions. Relationships between threshing forces and moisture contents of the unthreshed rice were examined in the laboratory as dried in the natural condition. The results of this study were as follows; 1. The mean threshing force of Japonica type varieties was about 1969r. and that of Indica type varieties was about 113gr. when external force was loaded in the direction parallel to the grain. 2. The threshing force bent to the grain was about 9.8through 28.2gr. equal to 7 through 21 percent to the threshing force parallel to the grain in Indica type varieties meanwhile about 59.8 through 115.0gr equal to 33 through 50 percent in Japonica type varieties. 3. Under the warmer temperature than $0^{\circ}C$, the change of threshing forces was not great in this experimental period on the harvesting dates. 4. The threshing force decreased s lightly as moisture content decreased in natural drying under the shade after cutting. 5. The threshing force of the lower portion was a little biger than that of the upper portion in an ear.