• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.968-977
• /
• 2008

In this paper, an analysis of TE-wave scattering from transversal-shifted tandem slits using fourier transform analysis and Wiener-Hopf technique are derived and the electrical performances have been compared with a commercially availabel software. In Fourier transform analysis, it is shown that a fast-convergent series solution can be obtained when the distance between the slits is very narrow, while in Wiener-Hopf technique, it is found that the highly-accurate approximation can be obtained when the gap between the slits becomes wider. In addition, this paper has dealt with a good agreement between two analytical solutions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1363-1375
• /
• 2000

The electromagnetic scattering characteristics by a periodic strip grating on a grounded dielectric slab for TM polarization case are examined from the viewpoints of both the reflection grating and the leaky wave antenna problems. Numerical results far two kinds of Bragg blazing (resonance type and non-resonance type) phenomena are given and some discussions on the properties(complex propagation constants, scattering characteristics, and distributions of strip current density) are presented. The comparison of the Bragg blazing phenomena between TM and TE polarization cases are also given in detail.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.445-448
• /
• 2010

For an enhanced thermoelectric performance, one-dimensional heterostructure nanowires were created that consisted of aBi core and Te shell. The structure was fabricated by depositing Te in-situ onto a Bi nanowire grown by our unique OFF-ON (on-film formation of nanowires) method. After examining a cross-sectional TEM image, it was found that diffusive interface was formed between Bi and Te. Selected area electron diffraction revealed that the crystallinity of the Te shell was some what lower compared to the highly single-crystalline Bi core. The Bi-Te core/shell nanowires can be a smart structure that suppresses phonon transport by several scattering mechanisms, making the OFF-ON method the simplest way to realize that structure.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.349-354
• /
• 2011

In this paper, H-polarized scattering problems by a resistive strip grating with zero resistivity at strip-edges over a grounded dielectric plane according to the strip width and grating period, the relative permittivity and thickness of a dielectric layer, and incident angles of a transverse electric (TE) plane wave are analyzed by applying the Fourier-Galerkin Moment Method (FGMM). The tapered resistivity of resistive strips has zero resistivity at strip edges, then the induced surface current density on the resistive strip is expanded in a series of Chebyshev polynomials of the second kind as a orthogonal ploynomials. The sharp variations of the reflected power are due to resonance effects were previously called wood's anomallies, the numerical results for the reflected power are compared with those of uniform resistivity in the existing papers.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.543-548
• /
• 2011

In this paper, H-polarized electromagnetic scattering problems by a resistive strip grating over a grounded dielectric plane according to the strip width and grating period, the relative permittivity and thickness of a dielectric layer, and incident angles of a TE (transverse electric) plane wave are analyzed by applying the FGMM (Fourier-Galerkin Moment Method). The tapered resistivity of resistive strips in this paper varies from finite resistivity at one edge to zero resistivity at the other edge, then the induced surface current density on the resistive strip is expanded in a series of Jacobi polynomials of the order ${\alpha}=1$, ${\beta}=0$ as a kind of orthogonal polynomials. The numerical results of the normalized reflected power show in good agreement with those of existing papers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.125-129
• /
• 1988

The acattering characteristics by the TE incident wave are analysed for its dielectric cylinder with arbitrary cross section partially covered by thin conductors. The integro differential equations consistent with boundary conditions of conductors and dielectric boundaries are derived by the equivalence principle. They are transformed into matrix equations by moment method. The rectangular dielectric ctlinder partially coverd by conductors at the upper and bottom side of the cylinder is chosen for the numerical example. Current distributions on conductors and sacttring cross sections by the cylinder are computed for the TE incident perpendicular to the conductor plane.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.23-29
• /
• 1995

A characteristic mode theory for longitudinal slot of arbitrary width in the outer conductor of coaxial waveguide is applied for calculating the characteristic magnetic currents, the characteristic fields, radiation patterns, and the fields evershere(inside and outside the guide, and in the aperture region). Numerical results of the equivalent magnetic currents and the radiation patterns are compared with those obtained by use of the method of moments.

• International Journal of Contents
• /
• v.7 no.4
• /
• pp.44-49
• /
• 2011

The scattering solutions for multiple rectangular metallic gratings in a perfectly conducting plane excited by the TE and TM delta sources are presented using an overlapping T-block method. A reflectarray composed of rectangular metallic gratings shows fanbeam radiation patterns that are useful for an electromagnetic fence. The scattering characteristics of multiple rectangular gratings were computed in terms of total radiated power and antenna directivity. The design method of a fan-beam reflectarray to obtain high directivity was also compared with superdirective radiation and parabolic reflector phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.47-47
• /
• 2009

The formation of variable one-dimensional structures including core/shell structure is of particular significance with respect to potential applications for thermoelectric devices with the enhanced figure of merit ($ZT=S2{\sigma}T/{\kappa}$). We report the fabrication of Bi-Te core/shell nanowire based on a novel stress induced method. Fig. 1 schematically shows the nanowire fabrication process. Bi nanowires are grown on the Si substrate by the stress-induced method, and then Te is evaporated on the Bi nanowires. Fig. 2 is a transmission electron microscopy image clearly showing a core/shell structure for which effective phonon scattering and quantum confinement effect are expected. Electrical conductivity of the core/shell nanowire was measured at the temperatures from 4K to 300K, respectively. Our results demonstrate that Bi-Te core/shell nanowire can be grown successfully by the stress-induced method. Based on the result of electrical transport measurement and characteristic morphology of rough surface, Seebeck coefficient and thermal conductivity of Bi-Te core/shell nanowires are presented.

• Journal of Powder Materials
• /
• v.25 no.5
• /
• pp.384-389
• /
• 2018

Nanoparticles of PbTe are prepared via chemical reaction of the equimolar aqueous solutions of $Pb(CH_3COO)_2$ and Te at $120^{\circ}C$. The size of the obtained particles is 100 nm after calcination in a hydrogen atmosphere. Dense specimens for the thermoelectric characterization are produced by spark plasma sintering of prepared powders at $400^{\circ}C$ to $500^{\circ}C$ under 80 MPa for 5 min. The relative densities of the prepared specimens reach approximately 97% and are identified as cubic based on X-ray diffraction analyses. The thermoelectric properties are evaluated between $100^{\circ}C$ and $300^{\circ}C$ via electrical conductivity, Seebeck coefficient, and thermal conductivity. Compared with PbTe ingot, the reduction of the thermal conductivities by more than 30% is verified via phonon scattering at the grain boundaries, which thus contributes to the increase in the figure of merit.