• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1936-1945
• /
• 2008

In Korea, TCN has applied to the Korean High-speed Train (HSR350X) through G7 High-speed Train development project. TCN is the most suitable international standard communication network for distributed control systems that is adopted for high-speed of vehicle, safety and flexibility. TCN is the network exclusively for the high-speed train and electrical trains. This TCN satisfies the network standards. The network standards are real time communication, fault tolerance design, integrated data system, resistance of environment, automated recognition for modification of vehicle formation and maintenance. The purpose of this research is applying the development of WTB analyzer which is part of communication network system TCN, to check the communication of high-speed trains and electrical trains.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.155-155
• /
• 2000

A high performance control and monitoring system for a high speed railway train requires a reliable the real-time communication network. TCN/WTB is designed for the data transmission over the train bus, and UIC556 defines that all the data be transmitted over TCN/WTB. This paper evaluates the performance of the link layer of WTB(Wired Train Bus). The evaluated results can be used for the selection of parameters for the sporadic message data.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.480-482
• /
• 1999

TCN standard has been applied to international train for provision of interoperability among European countries. In this paper, several TCN analyzers developed by European companies are introduced and the urgent need of TCN project engineering tool is emphasized for Korean High Speed Train.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1413-1427
• /
• 2007

The Train Networks has a goal which requires the fast and correct data communication for distributable equipment systems. For this, in 1999, some train makers had established the standard TCN(IEC61375-1) for the inter-operating between equipment systems. Recently, TCN is being used in EU, China and the requirement to use it is growing up by many other countries more and more. The TCN was adopted at Korea High-speed Train with first in Korea, and Rotem Company finished the design of TCMS with TCN network for Istanbul EMU and KTX-2 Train and tests them. TCN(Train Communication Networks) defines the set of communication vehicle buses and train buses. The MVB(Multifunction Vehicle Bus) defines the data communication interface of equipment located in a vehicle and the WTB(Wire Train Bus) defines the data communication interface between vehicles. This paper examines whether the result of on-board test is satisfied with the IEC61375-1(International Electrotechnical Commission 61375-1) which is the international standard of TCN and introduce the results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.133-133
• /
• 2000

This paper implements Message Service of TCN or IEC 61375-1. TCN is divided into two services, Variable and Message Service. Variable Service uses the broadcasting method with Source Address, but Message Service uses peer-to-peer method with Destination Address and has OSI 7 Layer. In TCN, interface between Transport and Network Layer has not been defined and Meaning of Packet Pool has not been defined exactly. Therefore, this paper proposes the Implementation method for both the interface between Transport and Network Layer and the packet pool for Message Service of TCN.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2169-2173
• /
• 2003

The development project of Korean High Speed Train (KHST) was started in 1996. As a national research project, the KHST project aims for a development of the next generation prototype train that has a maximum speed of 350 km/h. The development process of prototype KHST including 7 vehicles was completed last year and currently the prototype train is on its way of test running over the test track with gradually increased speed. The prototype KHST uses the real time network called TCN (Train Communication Network) for exchanging information between various onboard control equipments. After 10 years of development and modification period, TCN was confirmed as international standard (IEC61375-1) for the electrical railway equipment train bus. In the prototype KHST, all major control devices are connected by TCN and exchange their information. Such devices include SCU (Supervisory Control Unit), ATC (Automatic Train Control), TCU (Traction Control Unit), and so forth. For each device that sends and receives data using TCN, a device has to find out whether TCN is in normal or failure state before its data exchange. And also a device must have a proper method of data validation that was received in a normal TCN state. This is a one of the major important factors for devices using network. Some misleading information can lead the entire system to a catastrophic condition. This paper briefly explains how TCN was implemented in the prototype KHST train, and also shows what kind of the fault diagnosis method was adopted for a fail safe operation of TCN system

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.23-29
• /
• 2013

TCN(train communication network) standard was approved in 1999 by the IEC (IEC 61375-1) and IEEE (IEEE 1473-T) organizations to warrant a reliable train and equipment interoperability. TCN defines the set of communication vehicle buses and train buses. The MVB(multifunction vehicle bus) defines the data communication interface of equipment located in a vehicle and the WTB(wire train bus) defines the data communication interface between vehicles. The WTB and each MVB will be connected over a node acting as gateway. Also, to support applications demanding a high reliability, the standard defines a redundancy scheme in which the bus may be double-line and redundant-node implemented. In this paper we have presented protocol analysis platform for the WTB redundancy which is part of TCN system, to verify communication state of high-speed trains. As a confirmation of its validity, the technology described in this paper has been successfully applied to state monitoring and protocol verification of redundancy WTB based on TCN.

• Reproductive and Developmental Biology
• /
• v.29 no.1
• /
• pp.37-41
• /
• 2005

The aim of this study was to improve efficiency and quality of the production of Korean Native Cow embryos. We examined effects of ovarian morphology and maturation vessel on the development and cell number of blastocysts. The development rates to the 2-cell embryos from oocytes collected from the ovaries of different morphological statues were similar ranging between 70.3 and 84.1%. The development rate to the 8 cell- and blastocyst-stage embryos was the highest in the group without both corpus luteum (CL) and follicle. The inner cell mass (ICM), trophectoderm (TE) and total cell number (TCN) were significantly higher in the groups of follicular cyst and regressive CL than other treatment groups, and the same pattern was observed in the ICM/TCN ratio. The development rate to the 2-cell stage was significantly higher in 0.5-㎖ straw group than 0.25-㎖ straw group. However, the development rates to the blastocyst stage were similar between the dish and the straw group. There were no differences in the number of ICM and TE cells, TCN and ICM/TCN ratio of blastocysts from oocytes matured in the different vessels.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.659-665
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported. This paper presents a Train Communication Network simulator(TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. TCN of fieldbus was adopted as international standardization IEC 61375 in 1999. It has been operating on G7 train in korea. This paper developed TCNS(Train Communication Network simulator) as a simulator for performance evaluation. We can verify TCNS for preventing many kinds of occurring problems between the devices in data-communication. This study was developed TCNS as a simulator for the performance evaluation. We analyzed correlation between token, transmission data per paket and transmission speed of bus, through the TCNS, also analyzed result according to error rate of TCN. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.