• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.592-598
• /
• 1998

AZO(Aluminum doped Zinc Oxide) thin films were fabricated by reactive DC magnetron sputtering method using zinc metal target (Al 2%) and zinc oxide target ($Al_2O_3\;2%$) respectively. The intermediate condition with optimum transmittance and conductivity was obtained by controlling the sputtering parameters. Oxygen gas ratio for this condition was $0.5{\times}10^{-2}~1.0{\times}10^{-2}$ in oxide target and. In case of metal target, this optimum oxygen gas ratio at the applied power of 0.6 kW and 1.0 kW was 0.215~0.227 and 0.305~0.315, respectively. The resistivity of AZO film deposited was obtained $1.2~1.4{\times}10^{-3} {\Omega}{\cdot}$cm as deposited state regardless of target species.

• Korean Journal of Community Nutrition
• /
• v.19 no.3
• /
• pp.274-282
• /
• 2014

Objectives: The objective of this study was to revise the target pattern in food guidance system for adolescents' balanced menu planning. Methods: The food groups in the target pattern were divided into detailed food items, and intake number were assigned to each food items based on the revised standard food composition table. The validity of revised target pattern was examined. Menu planning according to the revised target pattern was made available to 305 male and female middle school students and the nutritional assessment of the menu plan were carried out using SPSS WIN 12.0. Results: The energy contents, energy contribution ratios of carbohydrate, fat, and protein, and 4 minerals' and 6 vitamins' contents of the revised target pattern were adequate. The average energy contents of the menu planned according to revised target pattern were 400~500 kcal higher than that of the revised target pattern when the revised standard food composition was applied. The energy contribution ratios of fat were 28.9%, close to maximum of acceptable macronutrient distribution range (AMDR) (30%), and that of carbohydrate were 54.5%, lower than minimum of AMDR (55%). The nutrient adequacy ratios (NARs) of calcium and vitamin C were less than 1.0. According to index of nutritional quality (INQ) of food items, kimchi, milk dairy products, and soybean curd were energy efficient source for calcium, kimchi, fruit, vegetable and seaweed were energy efficient source for vitamin C, with INQ of food items were higher or close to 2.0. Kimchi was the best energy efficient source of calcium and vitamin C. Conclusions: Revised target pattern based on the adolescent's foods intake was not good enough for balanced menu planning by adolescents, because what they ate and what they wanted to eat were very much different. Detailed guidance for food selection is necessary in each food items.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.35-38
• /
• 2014

Flat panel displays fabricated on glass substrate use amorphous Si for data processing circuit. Recent progress in display technology requires a new material to replace the amorphous Si, and ZnO is a good candidate. ZnO is a wide bandgap (3.3 eV) semiconductor with high mobility and good optical transparency. ZnO is usually grown by sputtering using ZnO ceramic target. However, ceramic target is more expensive than metal target, and making large area target is very difficult. In this work we studied characteristics of ZnO thin-film transistor grown by rf sputtering using Zn metal target and $CO_2$. ZnO film was grown at $450^{\circ}C$ substrate temperature, with -70 V substrate bias voltage applied. By using these methods, our ZnO TFT showed $5.2cm^2/Vsec$ mobility, $3{\times}10^6$ on-off ratio, and -7 V threshold voltage.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2002

Optimum field size for the whole body stereotactic radiosurgery was studied. Dose distributions from the various sizes of targets (diameter 1cm to 7cm, icm interval) were used for this study. Planing scores, expressed as the Target Coverage Index (TCI), were calculated for various target Margin ranged 0cm to 0.5cm. Highest scores were obtained for no Margin to the target size. The target Margin -0.5cm to 0cm to the target showed best TCI the cases of the target size larger than 6cm diameter. No Margin or 0.5cm Margin generated best TCI for less than 2cm cases. Prescription to 80~90% gives best results.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.6
• /
• pp.332-338
• /
• 2013

We propose a method for target detection in Infrared images. In order to effectively detect a target region from an image with noises and clutters, spatial information of the target is first considered by analyzing pixel distributions of projections in horizontal and vertical directions. These distributions are represented as Gaussian distributions, and Gaussian Mixture Model is created from these distributions in order to find thresholding points of the target region. Through analyzing the calculated Gaussian Mixture Model, the target region is detected by eliminating various backgrounds such as noises and clutters. This is performed by using a novel thresholding method which can effectively detect the target region. As experimental results, the proposed method has achieved better performance than existing methods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.107-114
• /
• 1996

The in situ target strength for the anchovy (Engraulis japonica) were measured by the split beam echo sounder system at 38 kHz. This study allowed us to detect the single echos from anchovy shoals which were dispersed during trawling operation in day time. The results of our study were as fellows: We found that the anchouy occupied about $95\%$ of the total catch from the detected shoals from which target strength data were collected. Length distribution of anchovy showed a mode and ranged from 13.6 to 15.4cm with a mean of 14.4cm and a standard deviation of 0.45cm, and weight distribution showed a mode and ranged from 16 to 28 g witha mean of 21.9 g and a standard deviation of 2.7 g. The target strength distribution of anchovy ranged from -40.7 dB to -69.2 dB in the water layer of ,$10\~30\;m$ -42.19 to -67.7 dB in the $30\~50\;m$ and -42.2 to -67.7 dB in $10\~50\;m$, showing 2 modes in each layer, respectively. Overall mean target strengths were -49.7 dB/fish and -33.1 dB/kg, averaged by area backscattering cross section $(\sigma)$, and the confidence interval for target strength was less than 1 dB. With the mean total length and the mean target strength, we drived the target strength-length relationship as $TS(\sigma)=20\;Log\;L-72.9$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1347-1351
• /
• 2004

The ZnGa$_2$O$_4$ phosphor target was synthesized through solid-state reactions as calcine and sintering temperature in order to deposit ZnGa$_2$O$_4$ Phosphor thin film by rf magnetron sputtering system. The x-ray diffraction patterns of ZnGa$_2$O$_4$ phosphor target showed the position of (311) main peak. The cathodoluminescence(CL) spectrums of ZnGa$_2$O$_4$ phosphor target showed main peak of 370 nm to 400 nm, and maximum intensity at the calcine temperature of $700^{\circ}C$ and sintering temperature of 130$0^{\circ}C$. It was possible to prepare The ZnGa$_2$O$_4$ phosphor thin film with synthesized ZnGa$_2$O$_4$ phosphor target and The prepared ZnGa$_2$O$_4$ phosphor thin film showed the position of (311) main peak.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.123-134
• /
• 2007

The building boundary should be registered in the cadastral map for the protection of property using the expansion of the registration items in the cadastral record and the construction of 3D-cadastral information system. In this study, the efficiency of registering the building boundary was suggested by non-target TS survey through the comparison between target TS and non-target TS survey about an accuracy and efficiency. At the result of this research, the RMSE of target TS and non-target TS survey is the X; ${\pm}0.056m$ and Y; ${\pm}0.043m$. Therefore, non-target TS survey shows the high accuracy. Also, the non-target TS survey is more efficient cost on time and personnel than target TS.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.207-213
• /
• 2013

An infrared image synthetic method is proposed for infrared system simulation. The synthesis image uses a background IR image captured from real scene and a target IR modeling image. The radiances related with maximum and minimum temperatures of the background and target images are calculated from the Planck's blackbody equation. Based on them, the background and target images are compensated and synthesized. The proposed method is simulated and the IR target images are generated by RadThermIR software.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.193-204
• /
• 2002

The purpose of this study was to investigate the effect of martial art type and target height on the ground reaction force factors during Dollyuchagi motion. Data were collected using force plate. Five Taekwondo players and five Hapkido players were tested during Dollyuchagi motion to three different target heights(0.8, 1.2, 1.6 m). After analysis of kinetics using force plate data, maximum vertical ground reaction force was 1.62~2.44 BW, and impulse was $0.66\sim1.01 BW{\cdot}s$. Even though there was no difference for maximum ground reaction forces and impulse between Hapkido and Taekwondo, as target height was higher, impulse increased. Anterior-posterior and vertical ground reaction forces at kicking foot take-off were greater with target height, although there was no difference for medio-lateral force with target height. At impact there was significant difference for anterior-posterior ground reaction force between Hapkido and Taekwondo players. Taekwondo players' force (range, -0.23~-0.26 BW) was greater than Hapkido players's force (range, -0.08~-0.14 BW).