• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.2
• /
• pp.31-40
• /
• 2019

Purpose : The purpose of this study was to compare the difference between preterm infants and toddlers (PT) and full-term infant and toddler (FT) of sensory processing ability, feeding as well as investigate the correlation of sensory processing ability with feeding of preterm infants and toddlers. Methods : The subjects of a study were 107 including 51 PT and 56 FT. Infant/Toddler Sensory Profile 2 (ITSP 2) was used to assess sensory processing ability. The Behavioral Pediatrics Feeding Assessment (BPFAS) was used to assess feeding behavior. The collected data were analyzed by using SPSS 21.0. Independent sample t-test was used in order to compare the difference between PT group and FT group. Pearson correlation analysis was used in order to investigate the correlation of sensory processing ability with feeding of preterm infants and toddlers. Results : There was a significant difference in sensory sensitivity and oral sensory processing between with PT group and FT group (p<0.05). There was a significant difference in feeding behavior between with PT group and FT group (p<.05). In PT group, there are positive correlations of sensory avoidance (r=.443) and sensory sensitivity (r=.374) with feeding frequency. General behavior (r=.390) and oral sensory processing (r=.513) showed a positive correlation with feeding frequency. In addition, oral sensory processing (r=.529) showed a positive correlation with feeding problem. Conclusion : It is proved that the interrelationship of sensory processing ability with feeding and of preterm infants and toddlers. And it is meaningful to recognize significance of sensory processing characteristics to comprehend feeding and of preterm infants and toddlers.

• Korean Journal of Psychosomatic Medicine
• /
• v.26 no.2
• /
• pp.135-144
• /
• 2018

Objectives : The purpose of this study was to identify the differences of demographic and clinical characteristics between child-adolescents who received medical inpatient care and non-hospitalized adolescents after suicide attempts. Methods : The study included 35 child-adolescents who were hospitalized (Admission group) and 114 child-adolescents who were not hospitalized (Non-Admission group) as a result of a suicide attempt from 2009 to 2015. We compared sociodemographic, clinical, and suicide attempt-related characteristics through a chi-square test and logistic regression analysis to evaluate the differences between the two groups. Results : Child-adolescents of this study most commonly attempted suicide by poisoning, and for motivation of interpersonal problems. Admission group had significantly fewer attempts through injury by sharp objects (${\chi}^2=4.374$, p=0.037) and attempted suicide with a higher chance of actually dying when compared to Risk-Rescue Rating Scale (t=1.981, p=0.049). In addition, Admission group had relatively common motivation for academic problems (${\chi}^2=12.082$, p=0.001) and less motivation for interpersonal difficulties. (${\chi}^2=9.869$, p=0.002) Psychiatric diagnosis at the time of visiting the emergency department showed higher rates of depression in the admission group than Non-Admission group (${\chi}^2=8.649$, p=0.003). The results of logistic regression showed that depression affects hospitalization (OR=2.783, 95% CI 1.092-7.089, p=0.032). Conclusions : This study is meaningful in that it revealed the social and clinical characteristics of all child-adolescents who were hospitalized at a university hospital after attempting suicide. This study identified differences in motivation, methods, and psychiatric diagnosis of hospitalized adolescents and those who were not. Therefore, the results may help adolescent suicide attempters to get a discriminatory approach based on their admission.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.89-97
• /
• 2021

Purpose: The purpose of this study is to compare and evaluate the dose change according to the gas volume variations in the rectum, which was not included in the treatment plan during radiation therapy for cervical cancer. Materials and methods: Static Intensity Modulated Radiation Therapy (S-IMRT) using a 9-field and Volumetric Modulated Arc Therapy (VMAT) using 2 full-arcs were established with treatment planning system on Computed Tomography images of a human phantom. Random gas parameters were included in the Planning Target Volume(PTV) with a maximum change of 2.0 cm in increments of 0.5 cm. Then, the Conformity Index (CI), Homogeneity Index (HI) and PTV D_max for the target volume were calculated, and the minimum dose (D_min), mean dose (D_mean) and Maximum Dose (D_max) were calculated and compared for OAR(organs at risk). For statistical analysis, T-test was performed to obtain a p-value, where the significance level was set to 0.05. Result: The HI coefficients of determination(R²) of S-IMRT and VMAT were 0.9423 and 0.8223, respectively, indicating a relatively clear correlation, and PTV D_max was found to increase up to 2.8% as the volume of a given gas parameter increased. In case of OAR evaluation, the dose in the bladder did not change with gas volume while a significant dose difference of more than D_mean 700 cGy was confirmed in rectum using both treatment plans at gas volumes of 1.0 cm or more. In all values except for D_mean of bladder, p-value was less than 0.05, confirming a statistically significant difference. Conclusion: In the case of gas generation not considered in the reference treatment plan, as the amount of gas increased, the dose difference at PTV and the dose delivered to the rectum increased. Therefore, during radiation therapy, it is necessary to make efforts to minimize the dose transmission error caused by a large amount of gas volumes in the rectum. Further studies will be necessary to evaluate dose transmission by not only varying the gas volume but also where the gas was located in the treatment field.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2023

Background: This study investigated the structural relationships among justice, test anxiety, and school reliability s non-face-to-face tests of dental hygiene students. Methods: A survey was conducted with 267 dental hygiene students. The survey items included general characteristics, opinions on evaluation, the fairness of non-face-to-face tests (distributive, procedural, and interactional justice), school satisfaction, and school reliability. For statistical analysis, independent-sample t-tests, one-way ANOVA, and structural modeling analyses were performed. Results: Among factors that directly affected distributive justice and reliability towards non-face-to-face tests, the higher the interactional justice (β=0.401, p<0.001) and distributive justice (β=0.232, p=0.002) levels, the higher the school satisfaction. The higher the school satisfaction (β=0.606, p<0.001) and procedural justice (β=0.299, p<0.001) levels, the higher the perceived reliability of the school. Factors that indirectly affected school reliability included interactional justice (β=0.243, p=0.010) and distributive justice (β=0.141, p=0.010). Interactional justice (β=0.592, p=0.010) and distributive justice (β=0.208, p=0.010) were the factors affecting school satisfaction. Moreover, factors that influenced school reliability were distributive justice (β=0.56, p=0.010), interactional justice (β=0.332, p=0.010), procedural justice (β=0.229, p=0.010), and distributive justice (β=0.116, p=0.010). Conclusions: Students will trust and be satisfied with schools when schools and professors sufficiently provide information on face-to-face tests and ensure proper procedures to achieve reasonable grades as rewards for exerted time and effort. Furthermore, this study provides a reference base for developing a variety of content for fair, non-face-to-face tests, thereby allowing students to trust their schools.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.4
• /
• pp.81-96
• /
• 2023

Objective : This study aimed to examine the association between the structural and functional aspects of social networks and health-promoting behaviors in community-dwelling older adults. Methods : Social networks based on structural and functional aspects and health-promoting behaviors by lifestyle were measured in 226 community-dwelling adults aged 65 years and over. To analyze the collected data, an independent t-test, one-way ANOVA, Pearson's correlation analysis, and hierarchical regression were performed. Results : The network size was the highest in the friend network, and the frequency of contact and social support was the highest in the non-living family network. Health-promoting behaviors were highest for activities of daily living and lowest for productive and social activities. All subfactors of social networks showed significant positive correlations with health-promoting behaviors. Hierarchical regression showed social support from neighbors as the variable with a significant effect on health-promoting behaviors; gender and depression were also influencing factors, and this model showed 37% explanatory power. Conclusion : To promote healthy behaviors of older adultsin the community, the development of health promotion programs and related policies considering social networks centering on social support from neighbors is required.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1151-1163
• /
• 2020

Purpose This study aimed to evaluate changes of subprosthetic pannus on cardiac CT and determine its relationship to echocardiographic findings in patients with mechanical aortic valve replacement (AVR). Materials and Methods Between April 2011 and November 2017, 17 AVR patients (56.8 ± 8.9 years, 12% male) who showed pannus formation on CT and had undergone both follow-up CT and echocardiography were included. The mean interval from AVR to the date of pannus detection was 10.5 ± 7.1 years. In the initial and follow-up CT and echocardiography, the pannus extent and echocardiographic parameters were compared using paired t-tests. The relationship between the opening angle of the prosthetic valve and the pannus extent was evaluated using Pearson correlation analysis. Results The pannus extent was significantly increased on CT (p < 0.05). The peak velocity (3.9 ± 0.8 m/s vs. 4.2 ± 0.8 m/s, p = 0.03) and mean pressure gradient (36.4 ± 15.5 mm Hg vs. 42.1 ± 15.8 mm Hg, p = 0.03) were significantly increased. The mean opening angles of the mechanical aortic leaflets were slightly decreased, but there was no statistical significance (73.1 ± 8.3° vs. 69.4 ± 12.1°, p = 0.12). The opening angle of the prosthetic leaflets was inversely correlated with the pannus extent (r = -0.57, p < 0.001). Conclusion The pannus extent increases over time, increasing transvalvular peak velocity and the pressure gradient. CT can be used to evaluate the pannus extent associated with hemodynamic changes that need to be managed by surgical intervention.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.38-48
• /
• 2011

Purpose: Dentists suffer back, neck and shoulder pain during their careers due to bad operating posture. If dentists have a good operating posture ergonomically, there would be less pain and discomfort in the shoulder and back. Therefore, dentists should learn the Home position which enables dentists to approach a stable posture ergonomically. This study was to compare tooth preparation in the Home position and the Random position, and evaluate the clinical efficacy of the Home position. Materials and methods: Tooth preparation for fixed partial denture was performed on the maxillary left 2nd premolar and maxillary left 2nd molar at the two different operating positions were compared. The amount of occlusal reduction, marginal width, subgingival margin depth, and convergence angle were measured. A T-test was performed separately to compare the results of the Random position and the Home position. Results: 1. The amounts of average thickness of occlusal reduction on fossa were deficient to the ordered ones in the Random position and the Home position (P > .05). 2. The average subgingival margin depth of prepared margin on maxillary left 2nd premolar, maxillary left 2nd molar were excessive in the Random position than in the Home position. On the maxillary left 2nd premolar, there was no statistical difference in the Random position and the Home position except Distal midline, DL line angle, Lingual midline, ML line angle (P< .05). On the maxillary left 2nd molar, there was no statistical difference in the Random position and the Home position (P < .05). 3. Average convergence angle in the Random position and the Home position were excessive compared to the ordered angle. There was no statistical difference in the Random position and the Home position (P > .05). 4. Analysis of pearson correlation : In the Random position, the amounts of average thickness of occlusal reduction, the average subgingival margin depth of prepared margin, convergence angle were significantly associated with each other (P < .05). But in the Home position, they were not significantly associated with each other (P < .05). 5. The time needed for preparation in the Home position was faster or equal than that of the Random position as time went on. Conclusion: In conclusion, there were no significant differences between Home position and Random position in measures of occlusal reduction, marginal width, marginal depth, convergence angle. However, preparation time and incidence of damaging adjacent teeth were less in Home position than in Random position. Therefore, if trained properly, Home position which is more ergonomically stable can be adopted for clinical use.

• Journal of agricultural medicine and community health
• /
• v.27 no.1
• /
• pp.99-113
• /
• 2002

For this study a sample of 205 people, 66 males and 139 females, over 65 years of age, residing in C-gu of S-si and utilizing senior centers, were selected, The objective of the study was to provide basic data for health promotion program development provided by health centers. A questionnaire was used to collect date on general characteristics, health status, social health status and utilization rate for health services. The instruments used in this study were the Lawton scale, to measure daily routine function, the MMSE-K developed by Folstein and modified to fit the Korea situation, for mental health status, and the CES-Dtool developed by Radloff, for emotional health status. the SPSS Window program was used to calculate percentages. Tests of significance were done using t-test and ANOVA. Multiple regression analysis was used to identify variables influencing the use of health services. The results are as follows : Of those utilizing senior citizen centers, 40.9% of males and 17.3% of the female thought they were healthy. The average score for IADL was 7.4. The daily routine of female respondents consisted of buying household articles and drugs, and other IADLs such as riding the bus or subway alone. These resulted in a higher score compared to males. For emotional health, 7.6% of the males reported depression compared to 21.6% of the females. For mental health, 48.5% of the males and 28.8% of the females were found to be in the group suspicious for dementia. On social health, 57.6% of the males and 62.6% of the females reported no intimate human relations. Of those older people who had close human relations, 52.5% of the males indicated a friend as the closest person and 53.8% of the females, their children. On use of health services, there was a significantly higher need for mobile medical care services treatment for those with lower education levels and status of window/widower. There was a significantly higher need for health exmination services for those with lower levels of exercise, greater satisfaction with sleep, higher levels of oral health care, and higher social contacts. In conclusion, there is a need to provide varied programs for the promotion of health, along with parallel resolution of social, psychological and economic issues. It is recommended that health services for elderly people provided by the health centers be implemented with full recognition of these characteristics and differences.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.300-305
• /
• 2004

Purpose: We underwent this study to evaluate the factors which influence labeling efficiency when modified in vivo erythrocyte labeling technique was used. Materials and methods: Thirty healthy volunteers (M:F=19:11, age:$25{\pm}2$ yrs) were enrolled in this study. Totally, two hundred ten samples were obtained from them. The 1 mg of stannous pyrophosphate was injected intravenously at the beginning of labeling. After suitable tinning time (5 min, 20 min, 35 min) passed by, blood (5 mL, 3 mL or 1 mL) was withdrawn into 10 mL syringe previously containing Tc-99m (740 MBq) and anticoagulant (heparin, ACD or CPDA) through 19-gauged scalp needle. The generator ingrowth time of Tc-99m was within 24 hrs in each case. The blood samples were placed on rotating invertor during incubation (10 min, 25 min, 40 min) but some of them were not. Immediately after the conclusion of incubation, the labeled blood specimens to analyze were centrifuged. and then %Unbound Tc-99m was calculated. Statical analysis was used paired T-test and one way ANOVA with SPSS 10.0. Results: The binding efficiency at 1 mL of blood volume was $73{\pm}32%,\;91{\pm}10%$ at 3 mL and $96{\pm}7%$ at 5 mL (p<0.01). The binding efficiency at 5 min of tinning time was $45{\pm}23%,\;98{\pm}6%$, at 20 min and $97{\pm}8%$ at 35 min (p<0.001). The binding efficiency at 10 min of incubation time was $96{\pm}7%,\;95{\pm}12%$ at 25 min and $98{\pm}3%$ at 40 min (p>0.05). The binding efficiency in case of using rotating invertor was $96{\pm}7%$ and the binding efficiency in case of not using it was $87{\pm}18%$ (p>0.05). There was no significant difference between them. In binding efficiency according to kinds of anticoagulants, ACD was $98{\pm}4%$, CPDA was $97{\pm}6%$ and heparin was $89{\pm}20%$ (p<0.001). Conclusion: When modified in vivo erythrocyte labeling technique is used with Tc-99m, the methods to obtain the highest labeling efficiency are as follow. The withdrawing blood volume should be over 3 mL, tinning time should be kept between 20 min and 35 min, and incubation time should be kept between 10 min and 40 min. ACD or CPDA have to be used as a anticoagulant except heparin and the blood samples should be placed on rotating invertor during incubation.