• Archives of Pharmacal Research
• /
• 제22권1호
• /
• pp.60-67
• /
• 1999

The object of this work was to study the pharmacokinetic differences and the cause of these differences in cirrhotic rats induced by biliary obstruction when aminophylline (8 mg/kg as theophylline, i.v.) was administered. The concentrations of theophylline and its major metabolite (1,3-dimethyluric acid) in plasma were determined by HPLC. In addition, formation of 1,3-dimethyluric acid from theophylline in microsomes and the changes in the activity of drug metabolizing enzymes, which are suggested to be involved in theophylline metabolism, were determined. In cirrhotic rats, the systemic clearance of theophylline was reduced to 30% of the control value while AUC (area under the palsma concentration-tie curve) and (t1/2)$\beta$ were increased 1.3 fold and3.5 fold, respectively. The formation of 1,3-dimethyluric acid was decreased to 30% of the control value in microsomes of cirrhotic rat liver. In cirrhotic rat liver, activities of aniline hydroxylase (CYP2E1 related), erythromycin-N-demethylase (CYP3A related), and methoxyresorufin-O-demethylase (CYP1A2 related), which were reported to be related with theophyline metabolism, were decreased to 67%, 53%, and 76% that of normal rat liver, respectively. From the results, it can be concluded that in cirrhotic rats induced by biliary obstruction, the total body clearance of theophylline is markedly reduced and it may be due to decreased activity of drug metabolizing enzymes in liver.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.75-89
• /
• 1993

Effect of the amount of fertilizer, plant density, and harvesting time on the production of tobacco leaf protein and fresh biomass was investigated. Flue-cured tobacco(M tabacum, L., cv. NC 82) seedlings were transplanted in the field dressed 200kg N per ha at 1$\times$105, 3$\times$105, 5$\times$105, 7$\times$105 plants per ha, and were harvested at the time when 6 and 10 weeks after transplanting, respectively. Harvest at 10 weeks after transplanting increased greatly number of leaves per plant and fresh weight of a plant, Precentage of senescent leaf weight, but significantly decreased fresh weight of a leaf and total protein contents g-1 fresh weight of leaf and stalk over the amount obtained from the harvest at 6 weeks after transplanting. Also, fresh leaf numbers of a plant, fresh weight of a leaf and of a plant, and total protein contents g-1 fresh weight of biomass were more decreased, but percentage of senescent leaf weight were remarkably increased under higher plant density. Therefore, it was seemed that harvesting at 6 weeks after transplanting under 1$\times$105 plant density per ha is more effective for producing higher yield of biomass and protein per plant than 10 weeks harvesting with 7$\times$105 population per ha. A trend was observed that biomass and protein yields per ha are positively correlated with plant population. Biomass yield per ha was the greatest at 7$\times$105 density(80.5t), but the peak of protein yield was at the near of 5$\times$105 population(2454kg as total protein) per ha on the regression curve. It was assumed that if tobacco plants are transplanted under 5$\times$105 plant density at the mid of May, and thereafter harvest at 6 weeks repeatedly during the growing season, it is possible to harvest 2~3 times per year, and to yield more 6.024kg of protein and over 140me1ric tons of fresh biomass ha 1 year 1 statistically in the korea tobacco growing regions.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.29-41
• /
• 1994

High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.52-59
• /
• 2007

We investigated the effects of the addition of Mn and $AB_5$ type alloy on the electrochemical characteristics of Ti-Cr-V BCC type alloys as anode materials for Ni-MH battery. The activation behavior and discharge capacity of the BCC type alloys were significantly improved by ball-milling with the $LmNi_{4.1}Al_{0.25}Mn_{0.3}Co_{0.65}$ alloy, because the $AB_5$ type alloy acted as hydrogen path on the surface of the BCC type alloy. Among the Mn substituted alloys($Mn=0.03%{\sim}0.08%$), the $Ti_{0.32}Cr_{0.38}Mn_{0.05}V_{0.25}$ alloy ball-milled with $AB_5$ type alloy exhibited the greatest discharge capacity of $336\;mAh{\cdot}g^{-1}$. In addition, Mn substituted alloys exhibited the lower plateau pressure in P-C- T curve, the better hydrogen storage capacity and faster surface activation compared with the alloy without Mn.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.227-232
• /
• 2007

The corrosion behavior of carbon steel (N80) in carbon dioxide saturated 1%NaCl solution with and without acetic acid or acetate was investigated by weight-loss test, electrochemical methods (polarization curve, Electrochemical impedance spectroscopy). The major objective is to make clear that the effect of acetic acid and acetate on the corrosion of carbon steel in $Co_2$ environments. The results indicate that either acetic acid or acetate accelerates cathodic reducing reaction, facilitates dissolution of corrosion products on carbon steel, and so promotes the corrosion rate of carbon steel in carbon dioxide saturated NaCl solution. All Nyquist Plots are consisting of a capacitive loop in high frequency region, an inductive loop in medial frequency region and a capacitive arc in low frequency region. The high frequency capacitive loop, medial frequency inductive loop and low frequency capacitive arc are corresponding to the electron transfer reaction, the formation/adsorption of intermediates and dissolution of corrosion products respectively. All arc of the measured impedance reduced with the increase of the concentration of Ac-, especially HAc. However, the same phenomenon is not notable after reducing pH value by adding HCl. HAc is a stronger proton donor and can be reduced directly by electrochemical reaction firstly. Ac- can't participate in electrochemistry reaction directly, but $Ac^-$ an hydrate easily to create HAc in carbon dioxide saturated environments. HAc is as catalyst in $Co_2$ corrosion. As a result, the corrosion rate was accelerated in the presence of acetate ion even pH value of solution increased.

• Archives of Pharmacal Research
• /
• 제29권6호
• /
• pp.514-519
• /
• 2006

A simple HPLC method using UV detection was developed and validated for the determination of levodropropizine (LDP) In dog plasma. The sample was prepared for injection using a liquid-liquid extraction method with 1-phenypiperazine as the internal standard. The mobile phase was methanol - diethylamine solution (0.05 M) (20:80, v/v, pH adjusted to 3.0 with $H_3PO_4$) with a detection wavelength of 240 nm. The limit of quantitation (LOQ) of LDP in a biological matrix was determined to be 25.25 ng/mL. The calibration curve was linear across the concentration range of 25.25 to 2020 ng/mL. The intra-day and inter-day precision values (CV%) were within 7% and accuracy (R.E. %) was within 6% of the nominal values for medium (252.5 ng/mL) and high (2020 ng/mL) LDP concentrations. For the LDP concentration at the LOQ, the intra-day and inter-day precision and accuracy were within 20% and 10%, respectively. The average absolute recovery for LDP was 70.28%. This method was successfully used to analyze plasma samples in a steady-state bioavailability study of a newly developed sustained-release LDP tablets (SR) using immediate-release tablets (IR) as the reference. The relative bioavailability of the SR was determined to be $106.3\;{\pm}\;12.8%$ (n=6). The $C_{max}$ of the SR was significantly lower (p<0.05), and the $t_{max}$ was significantly longer than that of the IR (p<0.05). The results of ANOVA and two one-sided tests indicated that the SR exhibited acceptable sustained release properties and was bioequivalent to the IR.

• The Plant Pathology Journal
• /
• 제36권6호
• /
• pp.558-569
• /
• 2020

Fusarium head blight (FHB) is a devastating fungal disease of wheat (Triticum aestivum L.). The lack of genetic resources with stable FHB resistance combined with a reliable and rapid screening method to evaluate FHB resistance is a major limitation to the development of FHB resistant wheat germplasm. The present study utilized an immature wheat spike culture method to screen wheat spike culture derived variants (SCDV) for FHB resistance. Mycotoxin concentrations determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) correlated significantly (P < 0.01) with FHB severity and disease progression during in vitro spike culture. Selected SCDV lines assessed for FHB resistance in a Fusarium field disease nursery in Carman, Manitoba, Canada in 2016 showed significant (P < 0.01) correlation of disease severity to the in vitro spike culture screening method. Selected resistant SCDV lines were also crossed with an elite cv. CDC Hughes and the progeny of F₂ and BC₁F₂ were screened by high resolution melt curve (HRM) analyses for the wheat UDP-glucosyl transferase gene (TaUGT-3B) single nucleotide polymorphism to identify resistant (T-allele) and susceptible (G-allele) markers. The progeny from the crosses were also screened for FHB severity using the immature spike culture method and identified resistant progeny grouped according to the HRM genotyping data. The results demonstrate a reliable approach using the immature spike culture to screen for FHB resistance in progeny of crosses in early stage of breeding programs.

• Genomics & Informatics
• /
• 제20권2호
• /
• pp.23.1-23.9
• /
• 2022

A survival prediction model has recently been developed to evaluate the prognosis of resected nonmetastatic pancreatic ductal adenocarcinoma based on a Cox model using two nationwide databases: Surveillance, Epidemiology and End Results (SEER) and Korea Tumor Registry System-Biliary Pancreas (KOTUS-BP). In this study, we applied two machine learning methods-random survival forests (RSF) and support vector machines (SVM)-for survival analysis and compared their prediction performance using the SEER and KOTUS-BP datasets. Three schemes were used for model development and evaluation. First, we utilized data from SEER for model development and used data from KOTUS-BP for external evaluation. Second, these two datasets were swapped by taking data from KOTUS-BP for model development and data from SEER for external evaluation. Finally, we mixed these two datasets half and half and utilized the mixed datasets for model development and validation. We used 9,624 patients from SEER and 3,281 patients from KOTUS-BP to construct a prediction model with seven covariates: age, sex, histologic differentiation, adjuvant treatment, resection margin status, and the American Joint Committee on Cancer 8th edition T-stage and N-stage. Comparing the three schemes, the performance of the Cox model, RSF, and SVM was better when using the mixed datasets than when using the unmixed datasets. When using the mixed datasets, the C-index, 1-year, 2-year, and 3-year time-dependent areas under the curve for the Cox model were 0.644, 0.698, 0.680, and 0.687, respectively. The Cox model performed slightly better than RSF and SVM.

• Clinical and Experimental Reproductive Medicine
• /
• 제37권2호
• /
• pp.115-124
• /
• 2010

목 적: 임신 전 $CD3^-/CD56^+/CD16^+$ 말초혈액 자연살해세포 (pbNK cell)의 분획과 세포용해 활성도를 정상군과 습관성 유산의 기왕력을 가진 환자군으로 나누어 비교, 분석하고 습관성 유산의 위험도를 제시할 수 있는 각각의 cut-off value를 설정하고자 하였다. 연구방법: 전향적 연구로서 습관성 유산의 기왕력이 있는 여성을 환자군 (n=35)으로 하였으며, 대조군으로 불임이나 습관성 유산의 기왕력이 없으며 정상아의 출산 경험이 있는 여성을 대조군 (n=15)으로 설정하였다. 유세포분석기를 이용하여 pbNK cell 분획 및 세포용해 활성도를 측정 후 그 결과를 비교 분석하였다. 결 과: pbNK cells의 분획은 습관성 유산 환자군에서 대조군에 비해 통계적으로 유의하게 높은 결과를 보였다($14.2{\pm}5.2$ vs. $9.4{\pm}3.7%$, p=0.002, 95% confidence interval [CI] 1.8~7.8). Receiver operating characteristic curve (ROC) 곡선을 이용하여 pbNK cell의 분획에 대한 cut-off values을 12.1%로 정하였을 때 습관성 유산의 위험도는 8.4배 증가하였다. pbNK cell의 K562 세포용해 활성도를 3가지 다른 Effector to Target (E:T) 비율 (50:1, 25:1, 12.5:1)을 사용하여 측정한 결과 각각의 경우에 있어 습관성 유산 환자군에서 대조군에 비해 통계적으로 유의하게 증가된 결과를 보였다 ($48.3{\pm}19.0$ vs. $31.3{\pm}11.9%$ in 50:1 ratio, p=0.002; $37.0{\pm}18.1$ vs. $20.2{\pm}9.2%$ in 25:1 ratio, p<0.001; $23.5{\pm}12.7$ vs. $12.4{\pm}7.3%$ in 12.5:1 ratio, p=0.001). ROC 곡선을 이용하여 각각 E:T 비율에서 세포용해 활성도의 cut-off values (43.1% in 50:1, 26.9% in 25:1, and 17.4% in 12.5:1)을 설정하여 분석한 결과 습관성 유산의 위험도는 각각 10.0배, 11.4배, 그리고 15.0배 증가된 결과를 보였다. 결 론: 원인이 분명하지 않은 습관성 유산 환자에서 pbNK cell의 분획과 세포용해 활성도를 측정하는 것은 면역학적 원인, 특히 동종면역 요인에 의한 습관성 유산의 유용한 진단 지표로 이용될 수 있을 것으로 사료된다. 향후 동종 면역반응에 의한 습관성 유산 환자에서 면역학적 원인의 치료 전, 후 pbNK cell의 분획과 세포용해 활성도를 측정, 비교하여 그 효과를 증명하는 연구가 필요할 것으로 생각된다.

• 한국지구과학회지
• /
• 제22권4호
• /
• pp.278-291
• /
• 2001

설화 광산의 중열수(中熱水) 금광상은 경기육괴의 화강암류내에 발달된 북동방향 단층 전단대를 충진한 괴상의 단성 석영맥내에 배태되어 있다. 설화 중열수 금광화작용(金鑛化作用)은 쥬라기 화강암류(161Ma)와 공간적으로 관련되어 있다. 맥상 석영은 3개유형의 유체포유물(流體包有物)을 포함하고 있다: 1) 저염농도(<5wt.% NaCl)의 액상 CO$_{2}$를 배태한 type IV 유체포유물; 2) 가스가 풍부(>70vol.%)하고, 기상으로 균질화하는 type II 유체포유물; 3) 소량의 CO$_{2}$를 포함하는 저내지 중염농도(0${\sim}$15 wt.% NaCl)의 type I 유체포유물. H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl계 유체포유물은 250${\circ}\;{\sim}$430${\circ}$C 온도와 1kbar 압력에 해당되는 액상선을 따라 초기에 포획된 불혼화 유체를 지시한다. 정밀 유체포유물 연구에의하면, 함금 광화작용중 점진적인 압력감소가 발생했음을 알 수 있다. 수용성 포유물의 유체는 온도 및 압력감소로 인한 균질한 H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl계 유체로부터 광역적인 유체의 불혼화(CO$_{2}-CH$_{4}$ 비등)작용을 거쳐 진화된 후기 유체이거나, 광화지역의 융기 및 삭박과 관련된 심부순환천수의 영향을 받았던 것으로 추정된다. 초기 유체는 균질한 H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl계 유체로서 다음과 같은 특성을 보인다: >250$^{\circ}$${\sim}$430$^{\circ}$C, 0.16${\sim}$0.62의 X$_{CO}\;_{2}$, 5${\sim}$14mole% CH$_{4}$, 0.06${\sim}$0.31mole% N$_{2}$, 0.4${\sim}$4.9wt.% NaCl의 염농도. 설화 금광산의 온도-조성 자료는 설화 함금열수계가 화강암질 용융체와 인접한 부분에 정치되어 있었음을 지시한다. 이러한 화강암질 용융체는 CH$_{4}$ 형성을 촉진시켜 유체를 환원상태로 변환시킨 것으로 추정된다. 철황화물중 자류철석이 지배적으로 산출됨은 환원유체 상태를 지시하고 있다. 황화광물의 ${\delta}\;^{34}$S값(-0.6 ${\sim}$ 1.4$%_o$)은 황의 심부 화성기원을 지시하고 있다.