• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.193-200
• /
• 2022

In this study, the finite-failure NHPP software reliability model was applied to the software development model based on the Weibull lifetime distribution (Goel-Okumoto, Rayleigh, Type-2 Gumbe), which is widely used in the software reliability field, and then the cost attributes were compared and evaluated. For this study, failure time data detected during normal operation of the software system were collected and used, the most-likelihood estimation (MLE) method was applied to the parameter estimation of the proposed model, and the calculation of the nonlinear equation was solved using the binary method. As a result, first, in the software development model, when the cost of testing per unit time and the cost of removing a single defect increased, the cost increased but the release time did not change, and when the cost of repairing failures detected during normal system operation increased, the cost increased and the release time was also delayed. Second, as a result of comprehensive comparative analysis of the proposed models, it was found that the Type-2 Gumble model was the most efficient model because the development cost was lower and the release time point was relatively faster than the Rayleigh model and the Goel-Okumoto basic model. Third, through this study, the development cost properties of the Weibull distribution model were newly evaluated, and the analyzed data is expected to be utilized as design data that enables software developers to explore the attributes of development cost and release time.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.119-133
• /
• 1997

In spite of much progress in vitro fertilization and embryo transfer (IVF-ET) program, the pregnancy rate remains at 20-30%, and the endometrial implantation rate per embryo transferred at 10-15%. As a result, about 90% of embryos may fail to implant to the endometrium, and many attempts such as optimization of follicular development, improvement of in vitro culture system including coculture, and micromanipulation of zona pellucida have been made to improve embryonic implantation after IVF-ET. Recently, several procedures of assisted hatching (AH) using micromanipulation have been introduced, and pregnancies and births have been obtained after AH. To develop and establish AH as an effective procedure to improve embryonic implantation, AH with partial zona dissection (PZD) was performed in 116 cycles of 89 infertile couples who had previous repeated failures of standard IVF-ET more than two times (Group I: 71 cycles in 54 patients), or who had implantation failure of embryos with good quality (Group II: 15 cycles in 13), or who had undergone AH without specific indication (Group III: 30 cycles in 22) from January, 1995 to Februry, 1996, and the outcomes of AH were analyzed according to pregnancy rate. The number of oocytes retrieved after controlled ovarian hyperstimulation (COH) was $9.9{\pm}7.1$ in Group I, $11.5{\pm}4.5$ in Group II, and $7.9{\pm}6.4$ in Group III. The number of embryos transferred after AH was $4.7{\pm}1.8$ in Group I, $5.3{\pm}1.3$ in Group II, and $3.5{\pm}2.4$ in Group III. The mean cumulative embryo score (CES) was $56.8{\pm}30.0$ in Group I, $76.1{\pm}35.9$ in Group II, and $38.5{\pm}29.9$ in Group III. The overall clinical pregnancy rate per cycle and per patient was 12.7% (9/71) and 16.7% (9/54) in Group I, 33.3% (5/15) and 38.5% (5/13) in Group II, and 6.7% (2/30) and 9.1% (2/22) in Group III, respectively. There were significant differences in the numbers of oocytes retrieved and embryos transferred, CES, and the clinical pregnancy rate per cycle among three groups. There was a significant inverse correlation between basal serum FSH level and CES, and no pregnancy occurred in patients with CES less than 20. In conclusion, AH of human embryos with PZD prior to ET has improved the implantation and pregnancy rates in IVF-ET patients with the past history of repeated failures, especially in spite of transfer of embryos with good quality, and AH will provide a range of novel techniques which may contribute much to effective management of infertile couples.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Radiation Oncology Journal
• /
• v.16 no.4
• /
• pp.441-446
• /
• 1998

Purpose : The incidence of esophageal carcinoma is increasing. Radical surgery is the treatment of choice, but large proportion of the esophageal cancer patients are with unresectable disease at the time of initial diagnosis, so radiation therapy has been the major treatment modality. We carried out retrospective analysis to see the outcome and prognostic factors of radiation therapy alone for esophageal carcinoma. Methods and Materials : From June of 1979 through December 1992, 289 patients with esophageal carcinoma were treated with radiation therapy alone at Department of Therapeutic Radiology, Seoul National University Hospital. Of these patients, 84 patients were excluded as they were ineligible for the current analyses. Twenty-two patients had distant metastasis other than supraclavicular lymph node metastasis, 52 patients received less than 45 Gy, and 10 patient were lost from follow-up. Therefore 205 patients constituted the base population of this study. According to AJCC s1aging system, there were 2 patients with stage 1, 104 with stage IIA, 26 with stage IIB, 48 with stage III, and 25 with stage IV Radiation dose ranged from 4500 cGy to 6980 cGy with median dose of 5940 cGy. Follow-up period of the alive patients ranged from 77 to 180 months. Results : The Median survival period of all the patients was II months and the 2-, 5-, and 10-year overall survival rates were 22.4$\%$, 10.2$\%$ and 5.3$\%$, respectively. Most of the failures were local recurrences. Of 169 failures, 134 had local failure as a component and 111 had local recurrence only. The Lymph node was most common distant metastatic site and the next was the lung. The stage, T-stage, N-stage, functional status, tumor size, and aim of treatment were statistically significant prognostic factors for survival by univariate analyses. But only tumor size and N-stage were significant by multivariate analyses. Conclusion : We could get 10.2$\%$ of 5 year survival rate and 5.3$\%$ of 10 year survival rate with radiation therapy alone. The size of tumor and N-stage were statistically significant prognostic factors for survival on multivariate analyses.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.117-133
• /
• 2010

A hybrid system of soil-nailing and compression anchor is proposed in this paper; the system is composed of an anchor bar (installed at the tip) with two PC strands and a steel bar. After drilling a hole, installing proposed hybrid systems, and filling the hole with grouting material, prestress is applied to the anchor bar to restrict the deformation at the head and/or to prevent shallow slope failures. However, since the elongation rate of PC strand is much larger than that of steel bar, yield at the steel bar will occur much earlier than at the PC strand. It means that the yield load of the hybrid system will be overestimated if we simply add yield loads of the two - anchor bar and PC strands. It might be needed to try to match the yielding time of the two materials by applying the prestress to the anchor bar. It means that the main purpose of applying prestress to the anchor bar should be two-fold: to restrict the deformation at the nail head; and more importantly, to maximize the design load of the hybrid system by utilizing load transfer mechanism that transfers the prestress applied at the tip to the head through anchor bar. In order to study the load transfer mechanism in a systematic way, in-situ pullout tests were performed with the following conditions: soil-nailing only; hybrid system with the variation of prestress stresses from 0 kN to 196 kN. It was found that the prestress applied to the anchor system will induce the compressive stress to the steel bar; it will result in decrease in the slope of load-displacement curve of the steel bar. Then, the elongation at which the steel bar will reach yield stress might become similar to that of PC strands. By taking advantage of prestress to match elongations at yield, the pullout design load of the hybrid system can be increased up to twice that of the soil-nailing system.

• KDI Journal of Economic Policy
• /
• v.12 no.3
• /
• pp.71-94
• /
• 1990

This paper reviews the rationale of monetary and banking intervention by an outside authority, either the government or the central bank, and seeks to delineate clearly the optimal limits to the monetary and banking deregulation currently underway in Korea as well as on a global scale. Furthermore, this paper seeks to establish an objective and balanced view on the role of the central bank, especially in light of the current discussion on the restructuring of Korea's central bank, which has been severely contaminated by interest-group politics. The discussion begins with the recognition that the modern free banking school and the new monetary economics are becoming formidable challenges to the traditional role of the government or the central bank in the monetary and banking sector. The paper reviews six arguments that have traditionally been presented to support intervention: (1) the possibility of an over-issue of bank notes under free banking instead of central banking; (2) externalities in and the public good nature of the use of money; (3) economies of scale and natural monopoly in producing money; (4) the need for macro stabilization policy due to the instability of the real sector; (5) the external effects of bank failure due to the inherent instability of the existing banking system; and (6) protection for small banknote users and depositors. Based on an analysis of the above arguments, the paper speculates on the optimal role of the government or central bank in the monetary and banking system and the optimal degree of monetary and banking deregulation. By contrast to the arguments for free banking or laissez-faire monetary systems, which become fashionable in recent years, monopoly and intervention by the government or central bank in the outside money system can be both necessary and optimal. In this case, of course, an over-issue of fiat money may be possible due to political considerations, but this issue is beyond the scope of this paper. On the other hand, the issue of inside monies based on outside money could indeed be provided for optimally under market competition by private institutions. A competitive system in issuing inside monies would help realize, to the maxim urn extent possible, external economies generated by using a single outside money. According to this reasoning, free banking activities will prevail in the inside money system, while a government monopoly will prevail in the outside money system. This speculation, then, also implies that the monetary and banking deregulation currently underway should and most likely will be limited to the inside money system, which could be liberalized to the fullest degree. It is also implied that it will be impractical to deregulate the outside money system and to allow market competition to provide outside money, in accordance with the arguments of the free banking school and the new monetary economics. Furthermore, the role of the government or central bank in this new environment will not be significantly different from their current roles. As far as the supply of fiat money continues to be monopolized by the government, the control of the supply of base money and such related responsibilities as monetary policy (argument(4)) and the lender of the last resort (argument (5)) will naturally be assigned to the outside money supplier. However, a mechanism for controlling an over-issue of fiat money by a monopolistic supplier will definitely be called for (argument(1)). A monetary policy based on a certain policy rule could be one possibility. More importantly, the deregulation of the inside money system would further increase the systemic risk inherent in the current fractional banking system, while enhancing the efficiency of the system (argument (5)). In this context, the role of the lender of the last resort would again become an instrument of paramount importance in alleviating liquidity crises in the early stages, thereby disallowing the possibility of a widespread bank run. Similarly, prudential banking supervision would also help maintain the safety and soundness of the fully deregulated banking system. These functions would also help protect depositors from losses due to bank failures (argument (6)). Finally, these speculations suggest that government or central bank authorities have probably been too conservative on the issue of the deregulation of the financial system, beyond the caution necessary to preserve system safety. Rather, only the fullest deregulation of the inside money system seems to guarantee the maximum enjoyment of external economies in the single outside money system.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.137-147
• /
• 2008

Statement of problem: Dental implant procedure has been recognized as a very effective treatment to rehabilitate fully or partially edentulous patients. However, mechanical failures such as screw loosening, screw fracture have been still reported frequently. Purpose: The purpose of this study was to evaluate the influence of tungsten carbide/carbon coating, which has superior hardness and frictional wear resistance, on implant-abutment screw loosening of three different joint connections after one million cyclic loading. Material and methods: The values of detorque before and after loading were measured in three different joint connections (Osstem Implant, Korea), one external butt joint, US II implant system and two internal cones, SS II and GS II system. The values of detorque before loading was analyzed by one-way ANOVA, and two-way ANOVA and Scheffe' test were performed for the value of detorque after loading. Results: 1. The values of initial detorque of tungsten carbide/carbon coated Ti alloy screw were smaller those of Ti alloy screw (P<.01), and there were no differences among implant systems in each screw (P>.05). 2. In comparison of loss rate of detorque value after cyclic loading, US II system was greater than SS II and GS II system but there was no difference between SS II and GS II system (P<.01). 3. Loss rates of detorque value after cyclic loading decreased consistently at tungsten carbide/carbon coated Ti alloy screw comparing with Ti alloy screw in all implant systems (P<.01), and there were no differences among three systems in reduction of loss rates by using tungsten carbide/carbon coated Ti alloy screw (P>.05). Conclusion: Tungsten carbide/carbon coating to increase preload with reduction of friction resistance was a effective way to decrease screw loosening by functional loading.

• The Korean Journal of Medicine
• /
• v.99 no.1
• /
• pp.37-49
• /
• 2024

Background/Aims: In Korea, the incidence of primary diffuse large B-cell lymphoma of the central nervous system (PCNSL) is increasing and autologous stem cell transplantation (ASCT) has improved the survival of younger patients. We explored our real-world experience with PCNSL at Asan Medical Center (AMC). Methods: We used the AMC lymphoma registry to collect patient data prospectively. We analyzed 279 patients diagnosed from 2002 until August 2019. Results: The PCNSL incidence at AMC increased progressively and comprised 7.4-8.9% of new non-Hodgkin lymphoma patients annually during the most recent 4 years. The median age was 60 years (range, 17-85) and males comprised 55%. Patients under 65 years of age (n = 183) had no significant differences in characteristics compared to those aged 65 years or over, with the exception of less occipital lobe involvement and lower beta-2 microglobulin levels. Rituximab, methotrexate, procarbazine, and vincristine (R-MPV) combination induction had the best overall response, of 95%. The median overall survival was 3.8 years with 5- and 10-year survival rates of 41.5% and 30.2%, respectively. Survival was better in younger patients and those treated with ASCT. Thiotepa, busulfan, and cytoxan (TBC) conditioning chemotherapy had better survival than other combinations. The International Extranodal Lymphoma Study Group and Memorial Sloan Kettering Cancer Center prognostic score systems were valid in this cohort. Age and performance status were independent prognostic factors. Exclusive extra-central nervous system failure occurred in six patients (5.6%) among 107 failures. Conclusions: The incidence of PCNSL is rising. R-MPV induction therapy followed by ASCT with TBC has improved the survival of young, fit PCNSL patients.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.4
• /
• pp.327-338
• /
• 2014

The objective of this study is to enhance the effectiveness of Korean Inspection and Maintenance (I/M) program. Three main tasks are: to measure pollutant emissions of in-use light-duty diesel vehicles (LDVs); to evaluate the validity of existing smoke control scheme for low-smoke-emitting vehicles, which have diesel particulate filters, DPF, to meet stringent Euro-5 emission limits; and to assess the necessity and the benefit of $NO_x$ inspection, which is not involved in current I/M program. We measured second-by-second smoke, particulate and gaseous emissions of 27 LDVs using opacity smoke meter, photo-acoustic soot sensor, and portable emissions measurement system, respectively, under the Korean I/M test driving cycle, KD-147. We find that the DPF plays a key role in controlling soot, which can be considered as black carbon contained in particulate matter. Thus, from an I/M perspective, we believe smoke inspection strategies for Euro-5 diesel vehicles should be more focused on the capability of detecting DPF malfunctions or failures, in order to keep DPF properly functional. Fleet averaged distance-specific $NO_x$ emissions are consistently higher than corresponding emission limits, and the values are similar among pre-Euro-3, Euro-3, and Euro-4 vehicle fleets. These findings indicate that the $NO_x$ inspection should be incorporated into current I/M program in order to manage urban $NO_x$ emissions. This research allows the Korean I/M program keep pace with developments in vehicle technologies, as well as the increased emphasis on $NO_x$ with respect to air quality and human health.