• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.313-314
• /
• 2006

Indicating product quantity by real time can be benefit both worker and management. Worker can compare real product quantity with its target and can adjust working speed to match with goal. Therefore, so called JPH equipment developed to indicate target quantity of product. As a main processor PIC16F877 was used and FND display were used to indicate current time, elapsed time, JPH value and target amount of product. Values like JPH and starting time, etc. are can easily be set by $4{\times}4$ numeric keypad and display datum likes target amount of product, current time and elapsed time, etc are displayed on FND by RS232 serial transmit. The operation of JPH equipment are tested and verified through long term test and are proved acting properly on working conditions.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.87-92
• /
• 2005

In this study, an automation assembly jig for the automation assembly process for the ventilation grille that is used in the interior of a car Is developed. As the method that can do the automation assembly for the ventilation grille, a simple jig and air cylinder have been applied. And a solenoid valve, a filter regulator, and on-off switch have been used in controlling the system. Moreover, the timer is attached to the equipment so that a worker may control the assembly time, as fitting the quantity on demand of production. Actually with executing the assembly test productivity and performance of assembly have been verified. In case of the automation assembly work for a ventilation grille is compared to the manual work. The optimum working speed has been identified to make the process twice or three times better.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.77-82
• /
• 2000

In this study, an automation assembly jig for the automation assembly process for the ventilation grille that is used in the interior of a car is developed. As the method that can do the automation assembly for the ventilation grille, a simple jig and air cylinder have been applied. And a solenoid valve, a filter regulator, and on-off switch have been used in controlling the system. Moreover, the timer is attached to the equipment so that a worker may control the assembly time, as fitting the quantity on demand of production. Actually with executing the assembly test productivity and performance of assembly have been verified. In case of the automation assembly work for a ventilation grille is compared to the manual work. The optimum working speed has been identified to make the process twice or three times better.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.545-548
• /
• 2002

선박의 안전한 항해를 위해서 필수 장비 중 하나인 기상 팩스 장비는 연안국에서 FSK 방식으로 변조된 무선 주파수를 통해서 보내는 기상도를 선박에서 수신하여 이미지화 하는 장비이다. 연안국에서는 기상도를 스캔 한 후에 중심 주파수를 1900Hz로 하고, 흑점을 1500Hz, 백점을 2300Hz 신호로 FSK 변조하여 방송하면 선박에서 이 신호를 수신한다. 따라서 현재는 기상 팩스를 받기 위해서는 기상 팩스 장비가 필요하다. 본 논문에서는 선박에 일반적으로 설치되어 있는 IBM-PC를 이용하여 소프트웨어만을 사용하여 기존의 기상 팩스 장비가 가지고 있는 모든 기능을 구현하고, 기상도의 출력, 편집, 저장 기능을 추가로 설계 및 구현하였다. IBM-PC에서는 RS-232C 보트를 통해 수신된 신호를 Timer Interrupt와 Serial Interrupt를 사용하여 이미지화 하고 주파수를 선택할 수 있게 하고, 실시간 처리 등을 소프트웨어적으로 가능하게 하였다. IBM-PC를 사용함으로 기상도의 수신 및 상태를 개선하는 이미지의 보정이 가능하며, 저장 후 처리가 용이하고, 별도의 기상 팩스 장비를 구입할 필요가 없는 경제적인 기상 팩스 시스템이다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.155-162
• /
• 2018

Delta robots are usually used for industrial manufacturing, but heavy weight and expensive price have been obstacles to rapid propagation of robots in the field. The goal of this research is to make light-weight and price-competitive delta robots. To reduce the weight, we used plastic material for the arm link, and to reduce the price, we used a step-motor as the main actuator. First we formulated the equations of inverse kinematics for the designed delta robot and then verified these equations by using multibody-dynamics simulation. An algorithm of motion control was developed and applied to the motion-processing unit using a timer-interrupt of 8 milliseconds. Finally, we tested the performance of the new delta robot by checking its control of motion along line segments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1259-1265
• /
• 2014

In this paper, the real-time attitude determination based Matlab using low-cost receivers was designed and evaluated. The GNSS attitude determination system was implemented to operation in real-time by TimerCallback in MATLAB. The TTM(Transmission Time Misalignment) of U-blox receiver was confirmed through zero baseline tests and this problem was revised. The computed attitude by the high-cost NovAtel receiver was compared to the computed attitude by the low-cost U-blox receiver. As a result of this, the performance of attitude determination systems by low-cost receiver was confirmed. To determine baseline, LAMBDA and BC-LAMBDA for integer ambiguities search methods were used. To confirm suitable integer ambiguity search method in real-time attitude determination algorithm, determined baselines by two methods were compared, and it was confirmed that BC-LAMBDA is more suitable. As a result of this, the operation of real-time attitude determination system was confirmed using 3 low-cost receivers.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.7-11
• /
• 1988

This Paper describes technique for the design of system for telemetering the water temperature at sea. This telemetering device adopts FM-FM system, and its main carrier wave is 146.2MHz. The transmission power is about 1W, and the available distance of transmission is 2km. The telemetering time for the transmission and pause is controlled automatically by the CMOS programmable timer. The water temperature is measured by the electronic thermometer, it is varied by V-F converter which is built to a linear voltage controlled oscillator. The results of the experiment at the place where the receiver is off 2km from the transmitter, the water temperature measured with the mercury thermometer well agree with that of the telemetering device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.541-543
• /
• 2011

Recently oriental-medicine has become a new issue in world medicine field because of increased demands of old man's disease care. This paper proposes portable oriental-medicine multi electrically copping system. The system may be used by patients themselves without any help from others. Patient can use number of suction cups at the same time, solved itching and hardened muscles by keeping air pressure of suction cups for a long time through freely adjusting timer and vacuum pressure.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.475-484
• /
• 2021

The Android OS has quickly established itself with the smartphone market and is being applied in a variety of ways such as navigation and refrigerator panels. Existing terminals can implement services that require high precision while using RTOS that requires accurate execution time, but Android OS has a disadvantage in that it cannot provide high-precision real-time performance. In this paper, we propose a real-time communication method that operates in the Android OS. Real-time communication reduces the load using the UDP protocol, and configures the real-time operating system time tick through a high-precision timer in the kernel area. An Android application level library was created to implement real-time communication and compared with the existing Android library for real-time performance verification.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.18-26
• /
• 2011

Debates concerning the competitive edge of leading 3DTV technology of the shutter glasses (SG) 3D and the film-type patterned retarder (FPR) are flaring up. Although SG technology enables Full-HD 3D vision, it requires complex systems including the sync transmitter (emitter), the sync processor chip, and the LCD lens in the active shutter glasses. In addition, the transferred sync-signal is easily affected by the external noise and a 3DTV viewer may feel flicker-effect caused by cross-talk of the left and right image. The operating current of the sync processor in the 3DTV active shutter glasses is gradually increasing to compensate the sync reconstruction error. The proposed chip is a low-power hardware sync processor based discrete-event SoC(system on a chip) designed specifically for the 3DTV active shutter glasses. This processor implements the newly designed power-saving techniques targeted for low-power operation in a noisy environment between 3DTV and the active shutter glasses. This design includes a hardware pre-processor based on a universal edge tracer and provides a perfect sync reconstruction based on a floating-point timer to advance the prior commercial 3DTV shutter glasses in terms of their power consumption. These two techniques enable an accurate sync reconstruction in the slow clock frequency of the synchronization timer and reduce the power consumption to less than about a maximum of 20% compared with other major commercial processors. This article describes the system's architecture and the details of the proposed techniques, also identifying the key concepts and functions.