• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.417-426
• /
• 2010

In this study, ten different bio-adsorbents were prepared by immobilization of vegetable tannins such as mimosa(Catechol Tannin) and chestnut(Pyrogallol Tannin) on the collagen matrix which was derived from during leather manufacturing processing. Removal efficiency of Cu(II), Cd(II), Zn(II), Pb(II), Cr(III) by each bio-adsorbent in synthetic wastewater was evaluated by a laboratory-scale batch reactor at different reaction conditions. When mimosa was used as a vegetable tannin, the penetration efficiency of mimosa into the inner bundle of fiber depended on the dose of the naphthalene condensated penetrant; 3% ${\geq}$ 1.5% > 0%. For all bio-adsorbents, removal of heavy metal ions was not observed below pH 3.0 but was rapidly increased between pH 3.0 and 6.0, showing near complete removal of all heavy metal ions except Zn(II) above pH 6.0. Removal of Cr(III) was quite similar for all bio-adsorbents while removal of Cu(II), Zn(II) and Pb(II) was higher by bio-adsorbents immobilized with chestnut than that by mimosa. Adsorption of Pb(II) and Cu(II) by S10 bio-adsorbent was little affected by the presence of monovalent and divalent electrolytes as well as variation of 1000 times ionic concentration with $NaNO_3$.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.423-429
• /
• 2008

Application of manganese-impregnated activated carbon(Mn-AC) in the treatment of synthetic wastewater containing both organic and inorganic contaminants was investigated. Phenol and As(III) was used as representative organic and inorganic contaminants, respectively. When the stability of Mn-AC at acidic condition was evaluated with variation of solution pH ranging from 2 to 4, Mn-AC was unstable below pH 3, while negligible dissolution of Mn was observed above pH 4. This stability test suggests a plausible applicability of Mn-AC in the treatment of wastewater above pH 4. Compared to AC-alone, the adsorption rates of phenol as well as adsorbed amounts of phenol by Mn-AC were slightly decreased due to the decrease of the surface area by impregnation. The maximum adsorbed amount of phenol by Mn-AC was corresponds to 75% of that by AC-alone from the adsorption isotherm study. The oxidation efficiency of As(III) by Mn-AC was greater than that by AC-alone at lower pHs while reverse trend was observed as pH increased above 7. From this work, it was found that Mn-AC could be used in the simultaneous treatment of both phenol and As(III).

• The Korean Journal of Pharmacology
• /
• v.30 no.1
• /
• pp.117-124
• /
• 1994

Phospholamban is the regulator of $Ca^{2+}-ATPase$ in cardiac sarcoplasmic reticulum(SR). The mechanism of regulation appears to involve inhibition by dephosphorylated phospholamban. Phosphorylation of phospholamban relieves this inhibition. Recently, there has been a report that the cytoplasmic domain (amino acids 1-25) of phospholamban is insufficient to inhibit the $Ca^{2+}$ pump. To explore the domains of phospholamban responsible for $Ca^{2+}-ATPase$ inhibitory activity, we examined the effect of a synthetic phospholamban peptide consisting of amino acid residues 1-25 on $Ca^{2+}$ uptake by reconstituted skeletal SR $Ca^{2+}-ATPase$. The $Ca^{2+}-ATPase$ of skeletal SR was purified and reconstituted in proteoliposomes containing phosphatidylcholine (PC) or phosphatidylcholine: phosphatidylserine (PC:PS). Inclusion of a phospholamban peptide in PC proteoliposomes was associated with significant inhibition of the initial rates of $Ca^{2+}$ uptake at pCa 6.0, and phosphorylation of this peptide by the catalytic subunit of cAMP-dependent protein kinase reversed the inhibitory effect on the $Ca^{2+}$ pump. Similar effects of phospholamban peptide were also observed using PC:PS proteoliposomes. Based on these results, we could conclude that the cytoplasmic domain of phospholamban, containing the phosphorylation sites, by itself is sufficient to inhibit the $Ca^{2+}$ pump of SR.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.469-476
• /
• 2009

In this study, biodegradable superporous hydrogels(SPHs) with fast swelling and superabsorbent properties were prepared using biodegradable crosslinkers and their physicochemical properties were characterized. A biodegradable crosslinker (PLA-PEG-PLA DA) was synthesized by a ring opening polymerization of D,L-lactide (LA) using hydrophilic poly(ethylene glycol) as a macroinitiator, followed by diacrylation of the end groups for the introduction of polymerizable vinyl groups. Various kinds of hydrogels with different chemical compositions were prepared and characterized in terms of swelling ratio, swelling kinetics, and biodegradation properties. The synthetic results were confirmed by $^1H$-NMR, FT-IR and GPC measurements, and the porous structures of the prepared SPHs and their porosities were identified by a scanning electron microscope and mercury porosimetry, respectively. The physicochemical properties of SPHs could be controlled by varying their chemical compositions and their cytotoxicity were found to be very low by MTT assay.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.68-77
• /
• 2008

We have developed an inversion algorithm for loop-loop electromagnetic (EM) data, based on the localised non-linear or extended Born approximation to the solution of the 2.5D integral equation describing an EM scattering problem. Source and receiver configuration may be horizontal co-planar (HCP) or vertical co-planar (VCP). Both multi-frequency and multi-separation data can be incorporated. Our inversion code runs on a PC platform without heavy computational load. For the sake of stable and high-resolution performance of the inversion, we implemented an algorithm determining an optimum spatially varying Lagrangian multiplier as a function of sensitivity distribution, through parameter resolution matrix and Backus-Gilbert spread function analysis. Considering that the different source-receiver orientation characteristics cause inconsistent sensitivities to the resistivity structure in simultaneous inversion of HCP and VCP data, which affects the stability and resolution of the inversion result, we adapted a weighting scheme based on the variances of misfits between the measured and calculated datasets. The accuracy of the modelling code that we have developed has been proven over the frequency, conductivity, and geometric ranges typically used in a loop-loop EM system through comparison with 2.5D finite-element modelling results. We first applied the inversion to synthetic data, from a model with resistive as well as conductive inhomogeneities embedded in a homogeneous half-space, to validate its performance. Applying the inversion to field data and comparing the result with that of dc resistivity data, we conclude that the newly developed algorithm provides a reasonable image of the subsurface.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.93-107
• /
• 2013

Thermal conduction of the particulate composites or granular materials can be widely used in porous materials and geotechnical engineering. And it has continued to develop "effective thermal conductivity" of medium by modeling energy relationship among particles in medium. This study focuses on the development of the effective thermal conductivity at the unsaturated conditions of soils using the modified network model approach assisted by synthetic 3D random packed systems (DEM method, Discrete Element Method) at the particle scale. To verify the network model, three kinds of glass beads and the Jumunjin sand are used to obtain experimental values at various unsaturated conditions. The PPE (Pressure Plate Extractor) test is then performed to obtain SWCC (Soil-Water Characteristic Curve) of soil samples. In the modified network model, SWCC is used to adjust the equivalent radius of thermal cylinder at contact area between particles. And cutoff range parameter to define the effective zone is also adjusted according to the SWCC at given conditions. From a series of laboratory tests and the proposed network model, the modified network model which adopts a SWCC shows a good agreement in modeling thermal conductivity of granular soils at given conditions. And an empirical correlation between the fraction of the mean radius (${\chi}$) and thermal conductivity at given saturated condition is provided, which can be used to expect thermal conductivity of the granular soils, to estimate thermal conductivity of granular soils.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1566-1577
• /
• 2010

Nandrolone, 19-nortestosterone, is a synthetic androgenic-anabolic steroid promoting muscle growth. Nandrolone is also present in pig meat and sera at non-negligible levels. A number of scientific reports have suggested a positive relationship between incidence of infertility and increased meat consumption in humans. The present study was designed to determine out the effect of feeding nandrolone on the testis of the male reproductive tract. Mixtures of food and nandrolone at different concentrations (0.005 ppm and 0.5 ppm) were supplied to pubertal male rats for 6 weeks. Body weight was recorded every week during the entire experimental period. At the end of the treatment, the testis, epididymis, and epididymal fat were collected and weighted. Sperm numbers in the caudal epididymis were counted. Differential gene or protein expression of steroidogenic enzymes in the testes among experimental groups was determined by semi-quantitative real-time PCR or western blotting analysis, respectively. Histological changes of the testis induced by nandrolone treatment were examined by hematoxylin and eosin staining. Immunohistochemical analysis was employed to detect changes in the localization of steroidogenic enzymes in the testes among experimental animals. There were no significant changes on body, testis, epididymis, and epididymal fat weights among experimental groups. A significant increase of caudal sperm number was found in the 0.5 ppm nandrolone-treated group. Histological examination of the testes noted a high frequency of germ cell sloughing in seminiferous tubules of 0.5 ppm nandrolone-treated rats. Even though transcript levels of $3{\beta}$-hydroxysteroid dehydrogenase (HSD) I, $17{\beta}$-HSD4, and $17{\alpha}$-hydroxylase were influenced by nandrolone treatments, protein levels of all molecules examined in the present study were not significantly affected. Immunohistochemical analysis showed no visible changes in the localization of steroidogenic enzymes in the testes among experimental groups. The current study showed that oral intake of nandrolone in male rats for 6 weeks did not cause significant damage to the testis. It is considered that a feeding effect of nandrolone on male fertility would not be remarkable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.41-46
• /
• 2015

In the present study, different expression of protein from Taekwang was revealed by 2-DE, and expressions of protein on each week after flowering was investigated. After analysis of expression of protein, MALDI-TOF was executed to identify expected protein function. Results revealed that there were three patterns of expression of protein during the maturing. The first pattern was that proteins were gradually expressed as up-regulation from 1 week to 6 week. The second pattern was that proteins were expressed gradually from 1 week to 5 week and then it started down-regulation in 6 week. The last pattern was that proteins were gradually as up-regulation from 1 week to 3 week and then down-regulation until 6 week. This phenomenon suggests that young stage has more protein related to correspondence mechanism against disease and growth and then maturing stage has more expression of protein related to storage protein. In MALDI-TOF analysis, p24 oleosin isoform A protein was identified that relates oleosin which is synthetic product in oil body. This protein spot increased gradually until 5 week and then decreased after 5 week. It explained that the protein is active until maturing stage to protect oil in seed and then its activity has gradually degraded. This result may be expected that a protein, related to growth of a seed has increased until maturing and then a seed fills up with a storage protein.

• Journal of Life Science
• /
• v.26 no.12
• /
• pp.1477-1486
• /
• 2016

Lactulose (4-O-${\beta}$-D-galactopyranosyl-D-fructose) is a non-digestible synthetic ketose disaccharide which can used in food and pharmaceutical fields due to its useful functions for encephalopathy, chronic constipation, hyperammonemia, etc. Therefore, the lactulose is regarded as one of the most important disaccharides and have been concentrated much interesting as an attractive functional material in the current industry. From this reason, the research related on the production of lactulose has been carried out various academic and industrial research groups. To produce lactulose, two main methods, chemical production and enzymatic production have been used. Commercially lactulose produced by alkaline isomerization of lactose as chemical production method but it has many disadvantages such as rapid lactulose degradation, purification, and waste management. From these reasons, lactulose produced by enzymatic method which solves these problems has been suggested as a proper method for lactulose production. Two different enzymatic methods have been reported as methods for lactulose production. Lactulose can be obtained through hydrolysis and transfer reaction catalyzed by a ${\beta}$-galactosidase which requires fructose as co-substrate and exhibits a low conversion. Alternatively, lactulose can be produced by direct isomerization of lactose to lactulose catalyzed by cellobiose 2-epimerase which requires lactose as a single substrate and achieves a high lactulose yield. This review summarizes the current state of lactulose production by chemical and biological methods.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.34-41
• /
• 2000

Recently many scientists have tried to synthesize biodegradable polymers due to durable and non-biodegradable products of conventional synthetic plastics when these were wasted in nature. So to reuse the wastepapers for biodegradable polymer resources, ONP (old newsprint), OCC (old corrugated containerbpard) were carried out by the pretreatment of chlorinite, hypochlorite and oxygen-alkali treatment conditions. For manufacturing of biodegradable polymer with wastepaper, this study performed to investigate change of chemical components and optimal pretreatment condition. The summarized results in this study were as follows: Lignin content in ONP and OCC was was higher than in MOW and ash content was the highest in MOW. More amount of ash components were reduced by wet defiberation than by dry defiberation. Wet defiberation fiber are better than dry defiberated fiber in chemical pretreatment condition for wastepapers, and the best result was obtained in the condition of sodium chlorite at $70^{\circ}C$, because it has high delignification ratio, ${\alpha}$-cellulose contents and degree of polymerization in this treatment condition. Oxygen-alkali treatment condition is the worst method because of low yield, low degree of polymerization in this pretreatments.