• Journal of Digital Convergence
• /
• v.9 no.2
• /
• pp.1-13
• /
• 2011

This study aims to analyse the process of digital switchover in the UK, which is regarded as one of the most successful cases in the world, and to examine efficient plans for the future digital switchover project in Korea through the UK's case. The digital switchover in the UK shows with no doubt the significance of integrated government policies, collaboration between relevant governmental organisations, and the public service broadcaster. Along with this, active and detailed Public Relations (PR) should take place, helping the citizens realise the efficiency of the phased switchover region by region and the measures to resolve the gaps between all social brackets. To sum up, the successful digital transfer is not only achieved by governmental policy and technological preparation from broadcasters, but also by voluntary citizen participation. Government officers and broadcast executives need to realise this and should focus on communicating with citizens.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.507-513
• /
• 2012

This Paper focused on use intention at affect variable of broadcasting digital switchover. The author assumed that the perceived usability and perceived availability, social influence of technology acceptance model(TAM) are likely to affect the technological acceptance of broadcasting digital switchover. The results of this paper significant affect on the use intention of Social Influence, Personal Characteristics, Digital switchover perceive.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.309-316
• /
• 2017

In injection molding, the quality of an injection molded product varies greatly depending on the molding conditions. Many researche studies have been conducted on the quality analysis of molded parts according to the molding conditions such as injection pressure, injection temperature, and packing pressure. However, there have not been many studies on the V/P switchover timing. It is known that when a large pressure is applied to a cavity in the packing phase, the cavity pressure is most affected by the packing pressure. In addition, depending on the position (timing) of the packing pressure, it can have a direct influence on quality based on the shrinkage and dimensions of the molded parts. In this study, the change in pressure profile in the cavity according to the V/P switchover position is confirmed. A CAE analysis program (Moldflow) was used to simulate and analyze two models using the PC and PBT materials. In order to compare these results with the actual injection molding results, injection molding was performed for each V/P switchover position, and the correlation between simulation and experiment, especially for the shrinkage of molded parts, was evaluated.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.154-161
• /
• 2009

Thanks to the circumstance of digital convergence, most of the world TV and radio stations are gearing up for digitalisation of broadcasting. In this flux, digital switchover in South Korea should be completed by 2012 when transmission of analogue broadcasting signal will be ceased. According to the report, it shows only over 30% take up roughly so far, but there is no official survey from relevant organisation. It is very comparable with British digital switchover which is same year as S. Korea and has been reported 88% take up as of 2008 Q2. Yet the digital switchover in S. Korea inferred from this current is not a rosy future and even seems to be perilous. The purpose of this paper is to predict the media future of S. Korea at the view point of futurology and draw out the possibilities which enable to affect viewing behavior. In order to analyse it applies the futures wheel which is one of useful tools for future work. Consequently it suggests a number of scenarios how to cope with the impending situation in S. Korea.

• International Journal of Reliability and Applications
• /
• v.3 no.3
• /
• pp.147-154
• /
• 2002

In this paper, we consider the warm standby redundant system(WSRS) which is consisted of an active unit, a standby unit and a switchover device. In addition, the switchover processing is controlled by a control module. The effect of failure of the control module is taken into account to develop our reliability model for the redundant structure. For the performance evaluation of a redundant system with the function of switchover processing which is assumed to cause the increase of the failure rate of the system, some reliability indices, such as availability, average availability, reliability and steady state availability, are considered.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2382-2386
• /
• 2008

Due to the reduction of greenhouse gases and a sharp increase in the energy prices the world over, there is a growing interest in the railroad transport. In particular, in the case of containers which are the major item of railroad transport, a need for the switchover from the road transport to the railroad transport is being suggested, however, it is understood that the extent of the switchover occurring is only marginal. There exist many causes that account for the marginal extent of the switchover to the railroad transport. Some of them have to be dealt with at the policy level and efforts are needed to make it more efficient to use the railroad than other means of transport by improving railroad logistics facilities. Thus, the present study seeks to examine the possible measures for improving the railroad logistics facilities to promote the railroad transport.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.293-296
• /
• 2008

Injection molding operation consists of filling, packing, and cooling phase. The highest pressure is involved during the packing phase among the operation phases. Cavity pressure depends upon velocity to pressure switchover time and magnitude of packing pressure. The cavity pressure is directly related to stress concentration in the cavity of mold. Thus the observation and control of cavity pressure is very important to prevent mold cracking. In this study, cavity pressures were observed for operational conditions using the commercial CAE software, Moldflow. Operational conditions were velocity to pressure switchover time and packing pressure. Cavity pressures were also measured directly during injection molding. Simulation and experimental results showed good agreement.

• International Journal of Reliability and Applications
• /
• v.2 no.2
• /
• pp.107-115
• /
• 2001

This paper considers some reliability indices, such as availability, average availability, reliability and steady state availability, of a redundant system with the function of switchover processing. We also derive the confidence limits for steady state availability of such system. The system, which is considered in this paper, consists of an active unit, a standby unit and a switchover device. In addition, the switchover processing is controlled by a control module. The effect of failure of the control module is taken into account to develop our reliability model for the redundant structure. Numerical examples are presented to illustrate our results.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.685-692
• /
• 2012

Injection molding operation consists of phases of filling, packing, and cooling. The highest cavity pressure is involved in the packing phase among the operation phases. Thus the cavity pressure largely depends upon velocity to pressure (v/p) switchover timing and magnitude of packing pressure. Developed cavity pressure is directly related to stress concentration in the cavity of mold and it may cause a crack in the mold. Consequently control of cavity pressure is considered very important. In this study, cavity pressure was analyzed in terms of v/p switchover timing and packing pressure through computer simulation and experiment. Cavity pressure was increased as the v/p switchover timing was delayed. Residual pressure after cooling phase was observed when the v/p switchover timing was late, which was due to increased pressurizing time for long filling phase. Cavity pressure was increased proportionally with the packing pressure. Residual pressure after cooling phase was also observed, and it was increased with increasing packing pressure. High cavity pressure and residual pressure have been observed at late v/p switchover and high packing pressure. Compared with simulation and experimental results, the profiles of pressures were very similar however simulation could not predict residual pressure. Packing condition was important for the control of cavity pressure and the optimum condition could be set up using CAE analysis.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.259-273
• /
• 2008

This study aims to identify of customer features control the effect on revisit intention and switching intention. The statistical techniques used for this empirical analysis are frequency analysis, technology analysis, reliability analysis, factor analysis, confirmatory factor analysis along with path analysis and moderate regression analysis, which are based on structural model From the effect that customer features control the effect on switching barrier by switching intention, travel agencies has a control effect on 'financial switching costs' and 'relational switching costs', and airlines show they have control effect on 'relational switching costs.' In diversity pursuit factors, 'financial switching costs' and 'attractiveness of alternatives' have a meaningful control effect for travel agencies customers, while 'procedural switching costs' for airlines customers. In the analysis result of the effect that customer features control the effect on revisit intention by switching intention, 'percept' and 'diversity pursuit' have a meaningful control effect in travel agencies customers and airlines one, respectively.