• 한국지진공학회논문집
• /
• 제13권4호
• /
• pp.67-76
• /
• 2009

최근에 Active interaction control(AIC) 시스템이 준능동 제어 시스템의 하나로 제안되었다. AIC 시스템은 제어 대상 구조물과 보조 구조물로 구성되며, 두 구조물간의 실시간 결합-분리를 통해서 제어 대상 구조물을 제어하게 된다. 구조물간의 결합과 분리를 담당하는 장치의 실시간 변환은 스위칭 제어 알고리듬의 결합-분리 조건식에 의해 제어된다. 기존 스위칭 제어 알고리듬의 경우, 제어 대상 구조물의 응답을 효과적으로 감소시키는 반면 불필요하게 큰 제어력과 과도한 결합-분리 횟수를 필요로 하는 단점을 가지고 있다. 본 논문에서는 구조물간의 효율적인 결합-분리 조정을 위해서 스위칭 활성화 영역과 스위칭 비활성화 영역을 분리 표현하였으며, 결합-조건식에 의해 결정되는 스위칭 활성화 영역과 스위칭 비활성화 영역간의 일반적인 관계를 포괄 스위칭 틀을 이용하여 나타냈다. 과도한 결합-분리 횟수와 불필요하게 큰 제어력의 효과적인 감소를 위해서 새로운 스위칭 제어 알고리듬의 결합-분리 조건식은 포괄 스위칭 틀안에서 설계되었다. 또한 기존 논문에서 사용된 컨트롤 샘플링 주기(Control sampling period)의 역할을 결합-분리 횟수의 관점에서 재해석하였다. 제안된 알고리듬의 효용성과 컨트롤 샘플링 주기의 역할을 검증하기 위해서 단자유도 모델을 이용하여 자유진동에 대한 수치해석을 수행하였다. 수치해석결과, 총 스위칭 횟수를 감소시키기 위한 컨트롤 샘플링 주기의 인위적인 연장은 시스템의 제어 성능 향상에 필요한 구간 변환을 샘플링 주기 사이에서 억제시키는 단점을 가지고 있음을 확인하였다. 본 논문에서 제안된 알고리듬의 경우, 각각 과도한 결합-분리 횟수와 불필요하게 큰 제어력을 감소시키는데 효과적임을 알 수 있다.

• 대한전기학회논문지
• /
• 제37권11호
• /
• pp.826-833
• /
• 1988

In this paper we studied the control of overload which could bring the degradation of performance and threaten the stability of the electronic switching system. In order to get the essential requirement for overload control algorithm, we tried to extract the characteristics of commonly used algorithms by means of simulating overload control alogrithms in numerical stored program control switching model. As the result, we could find that the overload control algorithm which monitored the CPU occupancy had the best call complete rate and good response characteristecs and the algorithm using the offered load as a system state variable had a good grade of service which was represented by a short dial tone delay and 3rd quartile of deal tone delay. however, these control algorithms have no generality and need to get the control parameters by the trial-and-error method. We suggested the guidelines on the design of the overload control algorithm.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.347-355
• /
• 2002

Obstacle avoidance of underactuated robot manipulators using switching computed torque method (SCTM) is presented. One fundamental feature of this novel method is to use partly stable controllers (PSCs) in order to fulfill the ultimate control objective. Here, we use genetic algorithms (GAs) to acquire the optimum switching sequence of the control actions for a given time frame with the available set of elemental controllers, depending on which links/variables are controlled. The effectiveness of the concept is illustrated by taking a three-degrees-of-freedom (DOF) manipulator and showing enhanced performance of the proposed control methodology.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.203-206
• /
• 2000

This paper presents a torque ripple reduction technique of direct torque control(DTC) for high power induction motors driven by 3-level inverters with the inverter switching frequency limited around 0.5-1kHz level. It is noted that conventional DTC algorithms to reduce torque ripple are devised for applications with relatively high switching frequency above 2-3kHz. A new DTC algorithms especially for low switching frequency inverter system illustrates relatively reduced torque ripple are devised for applications with relatively high switching frequency above 2-3kHz. Anew DTC algorithm especially for low switching frequency inverter system illustrates relatively reduced torque ripple characteristics Simulation and experimental results show the effectiveness of the proposed control algorithm

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.25-33
• /
• 1997

The end-to-end rate-based control mechanism is used for the flow control of the ABR service to allow much more flexibility in ATM switching system. To accommodate the ABR service effciently many algorithms such as EFCI, EPRCA, ERICA, and CAPC2 have been proposed for the switch algorithm. ABR cells and related RM cells are received at the ATM switch fabric transparently without any processing. And then cells received from the traffic source are queued in the ABR buffer of switching system. The ABR buffer usually has some thresholds for easy congestion control signal transmission. Whatever we use, therefore, these can be many ABR traffic control algorithms to implement the ABR transfer capability. The genertion of congestion indicate signal for ABR control algorithms is determined by ABR buffer satus. And ABR buffer status is determined by ABR cells transfer ratio in ATM switch fabrics. In this paper, we presented the functional structures for control of the ABR traffic capability, proposed the readout scheduling, cell slot allocation of output link and the buffer allocation model for effective ABR traffic guranteeing with considering CBR/VBR traffics in ATM switch. Since the proposed readout scheduling scheme can provide more avaliable space to ABR buffer than existing readout scheduling scheme, generation rate of a SEND signal, that is, BCN signal in destination node can be increased for ABR call connection. Therefore, the proposed scheme, in this paper, can be appropriate as algorithm for effective ABR traffic service on output link of ATM switching node.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.227-237
• /
• 2016

A novel digital current control strategy for digitally controlled DC-DC switching converters, referred to as Adjacent Cycle Sampling (ACS), is proposed in this paper. For the ACS current control strategy, the available time interval from sampling the current to updating the duty ratio, is approximately one switching cycle. In addition, it is independent of the duty ratio. As a result, the contradiction between the processing speed of the hardware and the transient response speed can be effectively relaxed by using the ACS current control strategy. For digitally controlled buck DC-DC switching converters with trailing-edge modulation, digital current control algorithms with the ACS control strategy are derived for three different control objectives. These objectives are the valley, average, and peak inductor currents. In addition, the sub-harmonic oscillations of the above current control algorithms are analyzed and eliminated by using the digital slope compensation (DSC) method. Experimental results based on a FPGA are given, which verify the theoretical analysis results very well. It can be concluded that the ACS control has a faster transient response speed than the time delay control, and that its requirements for hardware processing speed can be reduced when compared with the deadbeat control. Therefore, it promises to be one of the key technologies for high-frequency DC-DC switching converters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.547-549
• /
• 1986

This paper deals with large scale distributed packet switching system which is modeled by state space form and optimizing routing algorithms and buffer size via a hierachical system optimization method, the interaction prediction method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.368-371
• /
• 1996

In this paper, a feedforward-plus-feedback control scheme is presented to prevent congestion in store-and-forward packet switching networks. The control scheme consists of two algorithms. Specifically, the input traffic adjustment algorithm employs a fairness policy such that the transmission rate of the input traffic is proportional to its offered rate. The control signal computation algorithms to ensure stability of the overall system in the robust sense and to ensure the desired transient behavior in the adaptive, with respect to variations of input traffic, are designed.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.620-631
• /
• 2000

본 논문에서는 인버터의 스위칭 주파수가 0.5-1kHz로 제한되는 3레벨 인버터로 구동되는 고전압 대용량 유도 전동기 직접토크제어의 토크리플 저감법을 제안한다. 기존의 토크리플 저감법은 인버터 스위칭 주파수가 비교적 높은 2-3kHz에서 동작하는 알고리즘으로 1kHz이하의 낮은 인버터 스위칭 주파수의 시스템에 적용하면 만족할만한 토크 라플 저감 성능블 얻을 수 없다. 새로운 직접토크제어 기법은 특히 낮은 스위칭 주파수를 갖는 시스템에 적용하기 위한 것이며, 모든 동작 속도 구간에서 토크리플 저감 성능을 나티낸다. 시뮬레이션과 실험을 통해 세안한 알고리즘의 타당성을 입증한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.676-681
• /
• 2002

This paper presents the implementation and experimental investigation of sensorless speed control for a variable-speed PMSM(Permanent Magnet Synchronous Motor) in super-high speed compressor operation. The proposed control scheme consists of two different sensorless algorithms to guarantee the reliable starting operation in low speed region and full torque characteristics using the vector control in high speed region. An automatic switching technique between two control modes is proposed to minimize the speed and torque pulsation during the switching instant of control mode. A testing system of 3.3㎾ PMSM has been built and 90% load test results at 7000r/min are presented to examine the feasibility of proposed sensorless control scheme.