• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1716-1724
• /
• 2016

This paper proposes both an active-switched quasi-Z-source inverter (AS-qZSI) and an extended active-switched qZSI (EAS-qZSI), which are based on the classic qZSI. The proposed AS-qZSI adds only one active switch and one diode to the classic qZSI for increasing the voltage boost capability. Compared with other topologies based on the switched-inductor/capacitor qZSI, the proposed AS-qZSI requires fewer passive components in the impedance network under the same boost capability. Additionally, the proposed EAS-qZSI is designed by adding one inductor and three diodes to the AS-qZSI, which offers enhanced boost capability and lower voltage stress across the switches. The performances of the two proposed topologies are verified by simulation and experimental results obtained from a prototype with a 32-bit DSP built in a laboratory.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.388-395
• /
• 2010

An active boost converter for a single phase SRM using series-parallel connected capacitors is proposed in this paper. The proposed active boost converter has two diodes and one power switch with an anti-parallel diode and one additional boost capacitor. The additional boost capacitor could be series or parallel connected to the dc-link capacitor to produce proper excitation and demagnetization voltage. The proposed active boost converter can easily achieve a fast excitation and demagnetization from the capacitor connection. In this paper, series and parallel connected converters are reviewed, and the detailed operating modes as well as the voltage characteristics of the proposed converter are analyzed. The simulation and experimental results shows the effectiveness of the proposed active boost converter.

• 대한전자공학회논문지
• /
• 제19권6호
• /
• pp.41-51
• /
• 1982

본 논문에서는 V[S(voltage inverter switch)를 사용한 SCF(switched capacitor filler)에 있어서 VIS의 비이상적인 동작이 여파기 특성에 미치는 영향을 여파기를 구성하는 각 소자들의 변화로써 분석하는 방법을 제시하였다. 또 위의 결과를 VIS가 없는 SCF의 경우에 응용함으로써 대부분의 SC(switched cavacito.) 회로를 쌍일차(bilinear) 변환된 영역에서 그 등가각로를 쉽게 구할 수 있어 SCF의 분석이 용이하고, 높은동작 주파수를 갖는 SCF를 적은 수의 능동 소자로 구현할 수 있는 방법에 대해 기술하였다. 그리고 저역 통과 여파기와 대역 저지 여파기를 실험하여 그 결과가 이론치와 잘 일치함을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.739-742
• /
• 2002

This article proposes a Four-Quadrant Analog Multiplier (4-QAM) applying switched-capacitor and pulse-width amplitude modulation (PWAM) principles. The features of the presented circuit are that it can function as analog multiplier with a wide dynamic range of input signal and no disturbing from deviation of carrier frequency of PWM signal. In addition, the circuit detail is simpler than that of the previously proposed circuits. It is then easy and applicable for employing it into Integrated Circuit (IC) realization to especially operate in low-frequency and low-power applications. The experimental results granted are in correspondence to the theoretical analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.202-207
• /
• 2015

A CMOS relaxation oscillator, with high robustness over process, voltage and temperature (PVT) variations, is designed in $0.18{\mu}m$ CMOS. The proposed oscillator, consisting of full-differential charge-discharge timing circuit and switched-capacitor based voltage-to-current conversion, could be expanded to a simple open-loop frequency synthesizer (FS) with output frequency digitally tuned. Experimental results show that the proposed oscillator conducts subcarrier generation for frequency-modulated ultra-wideband (FM-UWB) transmitters with triangular amplitude distortion less than 1%, and achieves frequency deviation less than 8% under PVT and phase noise of -112 dBc/Hz at 1 MHz offset frequency. Under oscillation frequency of 10.5 MHz, the presented design has the relative FS error less than 2% for subcarrier generation and the power dissipation of 0.6 mW from a 1.8 V supply.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.672-680
• /
• 2018

A bidirectional exponential-gain switched-capacitor (SC) DC-DC converter is developed in this paper. When compared with existing exponential SC converters, the number of switches is significantly reduced and its structure is simplified. The voltage transfer features, voltage ripple across capacitors, efficiency and output impedance of the proposed converter are analyzed in detail. Optimization of the output impedance is also discussed and the best type of capacitance distribution is determined. A common function of the voltage gain to the output impedance is found among the proposed converter and other popular SC voltage multipliers. Experimental evaluation is carried out with a 6-24V bidirectional prototype converter.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
• /
• pp.388-389
• /
• 2017

본 논문에서는 효율적인 에너지 관리를 위해 리튬이온 배터리를 적용 능동 셀 밸런싱 시스템 BMS에 대해 제안하였다. 제안된 방법은 다수의 셀과 하나의 커패시터로 구성된 SSC(Single Switched Capacitor) 방식에서 사용되는 커패시터를 리튬이온 배터리로 변경하여 적용한 것이다. SSC 방식은 커패시터의 방향성으로 인하여 홀수 번째와 짝수 번째의 배터리에 대해 별도의 스위치를 설치하여야 하며 조작이 복잡하다는 단점을 가지고 있었다. 이러한 단점을 보완하여 커패시터를 리튬이온 배터리로 대체하여 셀의 순서에 상관없이 적용이 가능한 셀 밸런싱 방법을 제안하였다. 제안된 방법의 효율성은 BMS를 구현하여 실험 하였다. 실험 결과 셀 밸런싱이 기존의 SSC 방식보다 개선되어 효율성이 입증되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.587-590
• /
• 2000

For high-accuracy signal processing of differential capacitance transducers, an interface circuitry based on a switched-capacitor sample/hold circuit is developed. Driven by nonoverlapping two-phase clocks, the interface produces the output voltage which is proportional to the ratio of difference-to-sum of two capacitors of a differential transducer. Performances of a prototype chip fabricated using 0.6 $\mu\textrm{m}$ n-well CMOS process were measured and compared with those simulated by HSPICE. The measured results indicate that 0.1% resolution is achievable with the proposed interface and the temperature-dependence of the interface is small enough fur practical applications.

• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.38-46
• /
• 1996

The commutation operation of the current source converter for switched reluctance motor drives is analyzed in this paper. The commutation operation in the current source converter consists of two modes. At turn-off of phase switch, the phase current decreases sinusoidally, and the sum of two phase currents during commutation period is constant. At this time, the capacitor voltage increases quickly with changing polarity and decreases slowly when another phase switches turn on or off. Frequency of step-down DC chopper in the current source converter is low because of the dump such as BJTs and GTOs are possible as phase switches instead of Power MOSFET and IGBTS. They may result in reductions of conduction losses and manufacturing cost in the current source converter comparing to the voltage source converter of SRM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.169-171
• /
• 2005

In this paper, a novel type of auxiliary switched capacitor assisted edge resonant soft switching PWM series load resonant high frequency inverter with two auxiliary edge resonant lossless inductor snubbers is proposed for small consumer induction heating appliances. The operation principle of this high frequency inverter is described using the switching mode equivalent circuits. The practical effectiveness of the newly proposed soft switching inverter are discussed as compared with the conventional soft switching high frequency inverters based on simulation and experimental results from an application point of view.