• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.267-270
• /
• 2000

In this paper, we consider the simple redundant structures with the function of hardware based active/standby control. The system includes two switch modules. The switch module is connected to a data bus, but only the active switch module has control of the data bus. The standby unit takes over the function of the active unit when the active unit failure or mode command are asserted. And this paper illustrate the high-speed router system and the overall redundant system architecture. The proposed redundant architecture for 80G Router system is verified and implemented with experiment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.205-208
• /
• 2002

An existing ATM switch fabric uses VPI(Virtual Path Identifier) and VCI(Virtual Channel Identifier) information to route ATM cell. But AAL type 2 switch which efficiently processes delay-sensitive, low bit-rate data such as a voice routes the ATM cell by using CID(Channel Identification) field in addition to VPI and VCI. In this paper, we research the AAL type 2 switch that performs the process of CPS packet. The Receive unit extracts the CPS packet from the inputted ATM cell. The designed receive unit consists of input FIFO, r)( status table, CAM(Content Addressable Memory), new CID table and partial packet memory. Also the designed receive unit supports the PCI interface with host processor. The receive unit is implemented in Xilinx FPGA and operates at 72MHz.

• 한국광학회지
• /
• 제17권5호
• /
• pp.469-474
• /
• 2006

본 논문에서는 실리카 기반의 다중모드 간섭기를 이용하여 적은 초과손실을 갖는 $1{\times}16$ 마하젠더 스위치에 대한 설계 및 측정결과에 대하여 논하였다. 제작된 $1{\times}16$ 마하젠더 스위치는 마하젠더 간섭계(Mach-Zehnder Interferometer, MZI) 구조를 갖는 $2{\times}2$ 열광학스위치를 단위소자로 하였으며, 15개의 단위소자를 이용하여 4단(stage)으로 구성하였다. 먼저 광분배기와 $2{\times}2$ MZI 열광학 스위치등의 개별적인 특성을 파악하였고, 그 결과를 전체 소자의 설계에 적용함으로써 보다 좋은 성능을 얻을 수 있었다. 제작된 다중모드 간섭기를 이용한 MZI 구조의 단위스위치 당 초과손실은 최소 -0.5dB로 측정되었다.

• Communications for Statistical Applications and Methods
• /
• 제8권2호
• /
• pp.435-442
• /
• 2001

Bayes estimators and generalized ML estimators for reliability of a k-unit hot standby system with the perfect switch based upon a complete sample of failure times observed from an exponential distribution using noninformative, generalized uniform, and gamma priors for the failure rate are proposed, and MSE's of proposed several estimators for the standby system reliability are compared numerically each other through the Monte Carlo simulation.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권3호
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.126-129
• /
• 2010

추진기관용 점화안전장치인 SAU에 적용 가능한 MEMS 관성 스위치를 고안하였다. 본 MEMS 관성 스위치는 일반적인 기계요소 설계 방식을 따라 설계하였으나 일반적인 MEMS 가속계와 다르게 목넘김 관성 스위칭 방식을 채택하여 일정 가속도 이상에서만 스위칭이 일어난다. 제작된 시료에 대한 검사 결과와 설계 데이터를 비교해 본 결과 관성 스위치의 구성 요소인 판 스프링 및 연성 힌지의 비선형요소에 의한 영향으로 인하여 설계된 스위칭 가속도 값과 근사한 차이가 유발됨을 확인하였다.

• 인터넷정보학회논문지
• /
• 제3권3호
• /
• pp.87-93
• /
• 2002

복잡한 통신망과 병렬컴퓨터에서는 효율적인 상호 연결을 위해 스위치가 중요한 영향을 미친다. 이 스위치는 라우팅 정보에 따라서 입력포트와 출력포트 사이에 연결을 해주는 역할을 하게 된다. 따라서 스위치에 성능을 향상시키는 것은 중요한 일이다. 본 논문에서 제안한 스위치는 컴퓨터 시뮬레이션 결과 입력버퍼형 보다 최대처리율이 11%이상 향상되었고, 다른 반얀형 스위치들에 비하여 성능과 하드웨어 양을 비교하여 볼 때 좋은 결과를 얻었다. 따라서 이 스위치는 VLSI 칩으로 구현될 경우 초고속 ATM-LAN 과 병렬컴퓨터를 개발하는데 유용하게 활용될 수 있을 것이다. 제안된 반얀형 스위치는 MAX$＋^+$PLUSII, VHDL을 이용하여 설계 및 검증을 하고 시뮬레이션을 하였다

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.786-797
• /
• 2016

This paper describes the design and development of a novel semiconductor-based solid-state switch for damped oscillating voltage test system. The proposed switch is configured as two identical series-connected switch stacks, each of which comprising 10 series-connected IGBT function units. Each unit consists of one IGBT, a gate driver, and an auxiliary voltage sharing circuit. A single switch stack can block 20 kV-rated high voltage, and two stacks in series are proven applicable to 30 kV-rated high voltage. The turn-on speed of the switch is approximately 250 ns. A flyback topology-based power supply system with a front-end power factor correction is built for the drive circuit by loosely inductively coupling each unit with a ferrite core to the primary side of a power generator to obtain the advantages of galvanic isolation and compact size. After the simulation, measurement, and estimation of the parasitic effect on the gate driver, a prototype is assembled and tested under different operating regimes. Experimental results are presented to demonstrate the performance of the developed prototype.