• Journal of Preventive Medicine and Public Health
• /
• v.52 no.4
• /
• pp.258-264
• /
• 2019

Objectives: The perceptions of family-planning (FP) acceptors regarding contraception influence the reasons for which they choose to switch their method of contraception. The objective of this study was to analyze the perceptions of contraception and rationales for switching contraceptive methods among female FP acceptors in West Nusa Tenggara, Indonesia. Methods: This study involved the analysis of secondary data from the Improve Contraceptive Method Mix study, which was conducted in 2013 by the Center for Health Research, University of Indonesia. The design of the study was cross-sectional. We performed 3 stages of sampling using the cluster technique and selected 4819 women who were FP acceptors in West Nusa Tenggara Province, Indonesia as the subjects of this study. The data were analyzed using multiple logistic regression. Results: The predominant pattern of switching contraceptive methods was switching from one non-long-term method of contraception to another. Only 31.0% of the acceptors reported a rational pattern of switching contraceptive methods given their age, number of children, and FP motivations. Perceptions of the side effects of contraceptive methods, the ease of contraceptive use, and the cost of the contraceptives were significantly associated (at the level of ${\alpha}=0.05$) with rational patterns of switching contraceptive methods. Conclusions: Perceptions among FP-accepting women were found to play an important role in their patterns of switching contraceptive methods. Hence, fostering a better understanding of contraception through high-quality counseling is needed to improve perceptions and thereby to encourage rational, effective, and efficient contraceptive use.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.807-815
• /
• 2019

In this paper, we design a power amplifier to support quad-band in wireless communication devices using RF CMOS 180-nm process. The proposed power amplifier consists of low-band 0.9, 1.8, and 2.4 GHz and high-band 5 GHz. We proposed a structure that can support each input matching network without using a switch. For maximum linear output power, the output matching network was designed for impedance conversion to the power matching point. The fabricated quad-band power amplifier was verified using modulation signals. The long-term evolution(LTE) 10 MHz modulated signal was used for 0.9 and 1.8 GHz, and the measured output power is 23.55 and 24.23 dBm, respectively. The LTE 20 MHz modulated signal was used for 1.8 GHz, and the measured output power is 22.24 dBm. The wireless local area network(WLAN) 802.11n modulated signal was used for 2.4 GHz and 5.0 GHz. We obtain maximum linear output power of 20.58 dBm at 2.4 GHz and 17.7 dBm at 5.0 GHz.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.31-40
• /
• 2018

We designed and implemented the attachable smart adapter for the general management of each company's agricultural machine regardless of whether it is equipped with a CAN (Controller Area Network) module. The smart adapter consists of a main board (Raspberry Pi3B), which operates agricultural machine's management software in Linux environment, and a self-developed interface board for power adjustment and status sensing. For the status monitoring, a sensing interface using a serial input was defined between the smart adapter and the sensors of the agricultural machine, and the state diagram of the agricultural machine was defined for diagnosis. We made a panel to simulate the sensors of the agricultural machine using the switch's on/off contact point, and confirmed the status monitoring and diagnostic functions by inputting each state of the farm machinery from the simulator panel.

• Journal of Service Research and Studies
• /
• v.8 no.3
• /
• pp.37-49
• /
• 2018

In this study, we conducted an exploratory study for designing service science as a degree program that will lead the 21st century. In the new era, the convergence of industries is accelerating and the mobility of the profession is greatly increased, so the talents to be trained in higher education will be greatly changed. We must cultivate human resources capable of creating their own jobs through competency development and cultivate talented individuals who can demonstrate creative initiative in the ecosystem where the boundaries between industries are dismantled. To this end, it is required to switch from the existing vertical majors and systems to horizontal majors, and service majors are expected to play a key role in this transition. In this study, we designed the service science degree program reflecting the changes of the new economy and reflecting the demand of the new education. The service science curriculum provides an analysis as it can award a degree as an independent major, or may serve as a sub-major or an associate major with existing majors. Service studies are expected to play the most effective role in cultivating the capabilities defined by the 21st century human resources in the World Economic Forum.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5179-5202
• /
• 2018

Transmission Control Protocol (TCP) is the most widely used protocol in the cloud data centers today. However, cloud data centers using TCP experience many issues as TCP was designed based on the assumption that it would primarily be used in Wide Area Networks (WANs). One of the major issues with TCP in the cloud data centers is the Incast issue. This issue arises because of the many-to-one communication pattern that commonly exists in the modern cloud data centers. In many-to-one communication pattern, multiple senders simultaneously send data to a single receiver. This causes packet loss at the switch buffer which results in TCP throughput collapse that leads to high Flow Completion Time (FCT). Recently, Software-Defined Networking (SDN) has been used by many researchers to mitigate the Incast issue. In this paper, a detailed survey of various SDN based solutions to the Incast issue is carried out. In this survey, various SDN based solutions are classified into four categories i.e. TCP Receive Window based solutions, Tuning TCP Parameters based solutions, Quick Recovery based solutions and Application Layer based solutions. All the solutions are critically evaluated in terms of their principles, advantages, and shortcomings. Another important feature of this survey is to compare various SDN based solutions with respect to different performance metrics e.g. maximum number of concurrent senders supported, calculation of delay at the controller etc. These performance metrics are important for deployment of any SDN based solution in modern cloud data centers. In addition, future research directions are also discussed in this survey that can be explored to design and develop better SDN based solutions to the Incast issue.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1058-1063
• /
• 2020

This paper proposes a 12-bit SAR A/D(Successive Approximation Register Analog-to-Digital) converter that operates at low power for bio-signal and sensor signal processing. The conventional SAR A/D converter utilized the reduction of the dynamic current, which resulted in reducing total power consumption. In order to solve the limitation of the sampling time due to charging/discharging of the capacitor for reducing dynamic current, the different sampling time on the C-DAC bit switch operation was applied to reduce the dynamic current. In addition, lowering the supply voltage of the digital block to 0.6V led to 70% reduction of the total power consumption of the proposed ADC. The proposed SAR A/D was implemented with CMOS 65nm process 1-poly 6-metal, operates with a supply voltage of 1.2V. The simulation results demonstrate that ENOB, DNL/INL, power consumption and FoM are 10.4 bits, ±0.5LSB./±1.2LSB, 31.2uW and 2.8fJ/step, respectively.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.201-213
• /
• 2021

Recently, personal mobility has been spreading and using increasing, but the pedestrian environment is getting worse and accidents are also rapidly increasing. Therefore, this study conducts a status survey related to the elements of pedestrian disturbances in personal mobility and identifies the problems. The following measures are presented to improve the pedestrian environment for the mobility handicapped through expert opinion surveys. The movement of individual mobility means in the walking space is prohibited, and the speed limit shall be stipulated to enable the mobility handicapped to walk safely and conveniently. Parking spaces will have to create obstacle zones in the parking area next to the roadway or at the border of sidewalks and roads, and regulations are needed to collect illegally parked vehicles. It is necessary to switch from the existing automobile-oriented road to the road structure considering the use of low and medium-speed vehicles.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.341-347
• /
• 2022

This research is designed to help and offer hold up to complete the requirements of aged and disable in a home. The control approach and the tone approach are used to manage the house appliances. The major organize system implementation in technology of wireless to offer distant contact from a phone Internet Protocol connectivity for access and calculating strategy and appliance remotely. The planned system no need a committed server PC with value of parallel systems and offers a new communication-protocol to observe and control a house environment with more than just the switch functionality. To express the possibility and efficiency of this system, devices like as lights switches, power plugs, and motion-sensors have been included with the planned home control system and supply more security manage on the control with low electrical energy activate method. The rank of switches is corresponding in all this control system whereby all user interfaces indicate the real time existing status. This system planned to manage electrical-appliances and devices in house with reasonably low cost of design, user friendly interface, easily install and provide high security. Research community generally specified that the network "Reconnaissance Attacks" in IPv6 are usually impossible due to they will take huge challenge to carry out address scanning of 264 hosts in an IPv6 subnet."It being deployed of IPv6 shows that it definitely enhances security and undermines the probability". This research of the IPv6 addressing-strategies at present utilizes and planned a new strategy and move toward to "mitigate reconnaissance attacks".

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.403-411
• /
• 2022

A motion-based sports game uses a motion sensor or a camera to exercise based on body movements, and it is possible to obtain exercise effects such as improving physical strength while enjoying the game. In prior works, various studies such as usability evaluation has been conducted on motion-based sports games. However, there has been no discussion about how the exercise effect is exerted on users when experiencing motion-based sports games as individual or team play. This study compared the user's exercise effects by analyzing the user's ECG (Electrocardiogram) sensor and the Kinect sensor's skeletal information using Nintendo Switch game that is played individually and as a team. In this paper, the experimental design and method, the quantitative measurement results based on ECG and Kinect, and the results of the post-test subjective measurement are discussed.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.106-119
• /
• 2023

Due to global decarbonization movement and tightening of maritime emissions restrictions, the shipping industry is going to switch to alternative fuels. Among candidates of alternative fuel, methanol is promising for decreasing SOx and CO2 emissions, resulting in minimum climate change and meeting the goal of green shipping. In this study, a novel combined system of direct methanol solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC), gas turbine (GT), and organic Rankine cycle (ORC) targeted for marine vessels was proposed. The SOFC is the main power generator of the system, whereas the GT and PEMFC could recover waste heat from the SOFC to generate useful power and increase waste heat utilizing efficiency of the system. Thermodynamics model of the combined system and each component were established and analyzed. Energy and exergy efficiencies of subsystems and the entire system were estimated with participation of the first and second laws of thermodynamics. The energy and exergy efficiencies of the overall multigeneration system were estimated to be 76.2% and 30.3%, respectively. The combination of GT and PEMFC increased the energy efficiency by 18.91% compared to the SOFC stand-alone system. By changing the methanol distribution ratio from 0.05 to 0.4, energy and exergy efficiencies decreased by 15.49% and 5.41%, respectively. During the starting up and maneuvering period of vessels, a quick response from the power supply system and propulsion plant is necessary. Utilization of PEMFC coupled with SOFC has remarkable meaning and benefits.