• 제목/요약/키워드: Surfactant-free emulsion polymerization

검색결과 10건 처리시간 0.022초

Poly(Styrene/Acrylate) Core-Shell 라텍스 입자의 제조와 물성에 관한 연구 (Preparation and Physical Properties of Poly(Styrene/Acrylate) Core-Shell Latex Particles)

  • 이경구;박근호
    • 한국응용과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.27-32
    • /
    • 2003
  • The core-shell latex particles were prepared by sequential emulsion polymerization of alkyl methacrylate and styrene(ST) by using an water-soluble initiator(APS) after preparing monomer pre-emulsion in the presence of an anionic surfactant(SDBS). In organic/organic core-shell polymerization, the pre-emulsion method, which minimized required quantity of sulfactant, has been used to increase the conversion rate and the stability of core-shell latex particles as well as to reduce the formation of secondary particle that cause problems of soap-free emulsion during shell polymerization. We used several methods to observe the core-shell structure. The core-shell structure was studied by measuring pH change during hydrolysis by NaOH, glass transition temperature($T_g$) by differential scanning calorimeter(DSC), morphology of latex by transmission electron microscope(TEM) and change of particle size and distribution by a particle analyzer.

아크릴 에멀젼 중합에서의 계면활성제 영향에 관한 연구 (A Study on the Effect of Surfactants in Acrylic Emulsion Polymerization)

  • 송주호;박상준;박상권;이명천;임종주
    • 공업화학
    • /
    • 제10권4호
    • /
    • pp.523-530
    • /
    • 1999
  • 아클릴계 점착제는 주로 용제를 사용하여 제조되어 왔으나 용제의 사용에 따른 화재의 위험성과 환경적인 부작용으로 인해 점차 법률적으로 규제의 대상이 되고 있음에 따라 용제를 사용하지 않는 수계 에멀젼 중합을 이용한 제조 방법이 중요하게 대두되고 있다. 따라서 본 연구에서는 $40^{\circ}C$의 반응기에 methacrylic acid(MAA), n-butyl acrylate(n-BA), 그리고 2-ethylhexyl acrylate(2-EHA) 등 3가지 종류의 단량체를 사용하여 유화 중합을 수행하였으며, 실험에 사용된 계면활성제는 음이온 계면활성제로 sodium dodecyl sulfate(SDS), 비이온 계면활성제로 ethylene oxide 계통을 사용하였다. 실험 결과 혼합 계면활성제 시스템에서의 전환율이 단일 계면활성제 시스템에서의 전환율보다 더 높게 나왔으며, 비이온 계면활성제만을 사용한 유화중합은 안정성이 떨어져 상 분리가 일어났다. 반면에 음이온 계면활성제 또는 혼합 계면활성제를 사용한 유화 중합 시스템은 매우 안정한 상태를 유지하여 12주 이상의 저장 안정성을 보였다. 혼합 계면활성제 시스템에서 에멀젼 입자는 비이온 계면활성제 시스템 비해 작은 크기를 가지며, 계면활성제의 양이 증가할수록 입자 크기는 감소하였다. 계면활성제의 형태와 사용량, 그리고 혼합 비율 등은 에멀젼 입자의 Tg와 분자량에 거의 영향을 미치지 않았다. 실험 결과를 종합하여 보면, 50개의 침수성기를 가지고 소수성 chain의 탄소수가 16~18인 비인온 계면활성제를 40~60% 정도 사용한 약 4 g 정도의 혼합 계면활성제 시스템이 에멀젼의 안정성과 접착력에서 가장 최적의 제조 조건임을 알 수 있었다.

  • PDF

Part 1 : Styrene과 COPS-I의 무유화공중합 (Part 1 : Soap-Free Emulsion Copolymerization of Styrene with COPS-I)

  • 이기창;추헌승;하정미
    • 접착 및 계면
    • /
    • 제15권3호
    • /
    • pp.93-99
    • /
    • 2014
  • 본 Styrene (ST)과 sodium 1-allyloxy-2-hydroxypropane sulfonate (COPS-I)의 무유화 공중합을 다양한 중합조건(ST, COPS-I, KPS, DVB의 농도 및 중합온도)하에서 실시하여, 165~550 nm 입자경 범위의 단분산 라텍스를 제조하였다. 일반적으로 COPS-I와 KPS의 농도, 중합온도, DVB의 농도 등의 변화는 고분자 입자수(입자경), 중합속도, 분자량, 제타전위 등에 밀접한 영향을 미침을 발견하였다. 입자수의 증가는 중합속도와 제타전위를 증가시켰으나 분자량은 감소하였다.

Polystyrene Latex 제조공정에서 초음파 에너지의 개시효과 (Ultrasound Energy Effect as Initiator of Polystyrene Latex Polymerization)

  • 이승범;김원일;홍인권
    • Elastomers and Composites
    • /
    • 제31권3호
    • /
    • pp.175-182
    • /
    • 1996
  • Polymer latices, prepared from the emulsion polymerization of vinyl monomer compounds, are widely used for many industrial applications. Included among these are uses in paints, adhesives, flocculants, and heavy-duty plastics as well as their original use in synthetic rubber compounds. The emulsion polymerization process with chemical initiator has chemical disadvantage such as removal of initiator which was left after polymerization. In this study, polystyrene latex was prepared by using ultrasonic irradiation which generate the free radical, and then it was analyzed by GPC. Reaction temperature hardly have an effect on average molecular weight. Average molecular weight is increased by increasing amount of surfactant, i.e. SDS, but polydispersity is decreased. After 90 minutes of reaction time, increase and decrease of average molecular weight Is repeated. It is proposed that monodisperse polymer is obtained by controlling ultrasonic irradiation time and surfactant concentration.

  • PDF

무유화중합에 의한 단분산 Submicron 크기의 고분자 미립자의 제조 (Preparation of Monodisperse Submicron-Sized Polymeric Particles by Emulsifier-Free Emulsion Polymerization)

  • 이기창
    • 접착 및 계면
    • /
    • 제13권3호
    • /
    • pp.101-108
    • /
    • 2012
  • 음이온개시제인 $K_2S_2O_8$ (KPS)와 양이온개시제인 2,2' azobis(2-methyl-propionamidine) dihydrochloride (AIBA)를 이용하여 MMA와 BMA 단량체간의 무유화공중합을 성공적으로 수행하여 PSD가 1.002~1.008인 단분산성이 우수한 poly(BMA-co-MMA)와 PBMA 라텍스들을 제조하였다. 실험결과, 160~494 nm 범위의 수평균입자경과 (1.25~7.55) ${\times}10^4$ 범위의 수평균분자량을 나타내었다. MMA/BMA 유화중합에 따르는 중합속도와 단량체 및 개시제 농도, DVB/EGDMA 가교제 농도, 중합온도 변화에 따르는 수평균입자경과 수평균분자량의 영향을 조사하였다. MMA/BMA 단량체 중 MMA 농도가 증가함에 따라 중합속도가 증가하였으며 일반적으로 이들 라텍스의 평균입자경과 평균분자량은 MMA/BMA 단량체중량비, 단량체량, 개시제량, 중합온도에 따라 쉽게 조절됨을 발견하였다.

Controlling Size and Distribution for Nano-sized Polystyrene Spheres

  • Yun, Dong-Shin;Lee, Hyeong-Seok;Jang, Ho-Gyeom;Yoo, Jung-Whan
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권5호
    • /
    • pp.1345-1348
    • /
    • 2010
  • Highly monodisperse polystyrene (PS) nanospheres were fabricated by surfactant-free emulsion polymerization in water using styrene, 2,2'-azobis(2-methyl propionamidine) dihydrochloride (AIBA), and poly(vinyl pyrrolidone) (PVP). The size and distribution of the PS nanospheres were systematically investigated in terms of initiator concentration, stabilizer concentration, reaction temperature, reaction time, and reactant concentration. With increasing AIBA initiator concentration, PS particle sizes are raised proportionally, and can be controlled from 120 to 380 nm. Particle sizes were reduced with increasing PVP concentration. This decrease occurs because a high PVP concentration leads to a large number of primary nuclei in the early stage of polymerization. When the reaction temperature increased, the sizes of the PS particles decrease slightly. The particles grew quickly during the initial reaction stage (1-3 h) and the growth rate became steady-state after 6 h. The PS sizes approximately doubled when the reactant (styrene, PVP, azo-initiator) concentrations were increased by a factor of eight.

무유화 유화중합에 의해 합성된 Core/shell 형태 PMMA/CdS 나노입자의 특성분석 (Characterization of Core/Shell PMMA/CdS Nanoparticles Synthesized by Surfactant-free Emulsion Polymerization)

  • 윤효정;임영목;심상은
    • 접착 및 계면
    • /
    • 제13권4호
    • /
    • pp.188-192
    • /
    • 2012
  • in-situ 무유화 유화중합 및 후속 CdS 코팅 공정으로 이루어진 방법을 이용하여 CdS로 코팅된 PMMA 나노입자를 제조하고 그 특성을 분석하였다. 합성된 CdS/PMMA 나노입자의 크기는 201.7 nm 였으며, TGA 및 원소 분석 결과 10.37 wt%의 CdS를 함유하고 있었다. PMMA 입자 표면에 코팅된 CdS 나노결정의 크기는 3.55 nm였으며 주로 (111) 결정면으로 성장되었다. UV-vis 분석 결과 blue-shifting 현상이 관찰되었으며, 이는 CdS/PMMA 하이브리드 입자상태에서의 CdS는 벌크 상태의 CdS가 갖는 2.41 eV의 밴드갭 에너지보다 큰 2.70 eV를 갖기 때문에 발생하는 양자구속효과에 의하여 기인하였다.

Fabrication of Uniform Hollow Silica Nanospheres using a Cationic Polystyrene Core

  • Yun, Dong-Shin;Jang, Ho-Gyeom;Yoo, Jung-Whan
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권5호
    • /
    • pp.1534-1538
    • /
    • 2011
  • Uniform, hollow nanosilica spheres were prepared by the chemical coating of cationic polystyrene (cPS) with tetraethylorthosilicate (TEOS), followed by calcination at 600 $^{\circ}C$ under air. cPS was synthesized by surfactant-free emulsion polymerization using 2,2'-azobis (2-methyl propionamidine) dihydrochloride as the cationic initiator, and poly(vinyl pyrrolidone) as a stabilizer. The resulting cPS spheres were 280 nm in diameter, and showed monodispersion. After coating, the hollow silica product was spherically shaped, and 330 nm in diameter, with a narrow distribution of sizes. Dispersion was uniform. Wall thickness was 25 nm, and surface area was 96.4 $m^2/g$, as determined by BET. The uniformity of the wall thickness was strongly dependent upon the cPS surface charge. The effects of TEOS and ammonia concentrations on shape, size, wall thickness, and surface roughness of hollow $SiO_2$ spheres were investigated. We observed that the wall thicknesses of hollow $SiO_2$ spheres increased and that silica size was simultaneously enhanced with increases in TEOS concentrations. When ammonia concentrations were increased, the irregularity of rough surfaces and aggregation of spherical particles were more severe because higher concentrations of ammonia result in faster hydrolysis and condensation of TEOS. These changes caused the silica to grow faster, resulting in hollow $SiO_2$ spheres with irregular, rough surfaces.

Effect of Multi-functional Group of Acrylate Crosslinker on Properties of Waterborne Polyurethane-acrylate

  • Moon, Seok Kyu;Kim, Eun-jin;Kwon, Yong Rok;Kim, Jung Soo;Kim, Hae Chan;Park, Han Soo;Kim, Dong Hyun
    • Elastomers and Composites
    • /
    • 제57권3호
    • /
    • pp.100-106
    • /
    • 2022
  • Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.

산화 그래핀과 나노 흑연이 폴리스티렌 나노복합재료의 유변물성 및 전기적 물성에 미치는 영향 (Influence of Graphene Oxide and Graphite Nanoplatelets on Rheological and Electrical Properties of Polystyrene Nanocomposites)

  • 염효열;나효열;이성재
    • 폴리머
    • /
    • 제38권4호
    • /
    • pp.502-509
    • /
    • 2014
  • 탄소기반 판상형 나노재료인 산화 그래핀(GO)과 나노 흑연(GNP)은 고분자재료에 전기 전도성을 부여하기 위한 복합재료용 나노필러로 사용되고 있다. 본 연구에서는 폴리스티렌(PS)에 나노필러를 첨가한 PS/GO와 PS/GNP 나노복합재료를 라텍스 기법으로 제조한 다음 유변학적, 전기적 물성을 비교 고찰하였다. PS 입자는 무유화제 유화중합으로 중합하였으며, GO는 흑연으로부터 modified Hummers 방법으로 합성하였다. 친수성인 GO는 첨가제 없이 PS 수성 현탁액에 분산하였으며, GNP는 분산성을 높이기 위해 계면활성제를 첨가하여 분산하였다. 나노필러에 따른 유변물성은 GO가 GNP에 비해 높게 나타났는데, GO는 단일층으로 분산이 가능한 반면, GNP는 다수의 층이 겹쳐진 형태이므로 나노 규모의 균질한 분산을 이루지 못하기 때문이다. 전도성 통로가 형성되는 지점인 전기적 임계점은 PS/GO, PS/GNP 나노복합재료에 대하여 각각 0.50, 5.82 wt%로 나타났다. PS/GO 나노복합재료가 우수한 전기 전도도를 보여주는 이유는 성형 시 열처리에 의해 GO가 환원되기 때문이다.