• 동력기계공학회지
• /
• 제14권4호
• /
• pp.50-55
• /
• 2010

In order to investigate tribological effects of nano copper particles impregnated(CuN) on surface polytetrafluoroethylene(PTFE) on sealing wear and an experimental study was carried out to determine the wear behavior of copper nano-particles impregnation two kind thickness in super critical $CO_2$ liquid. Experimental results showed that the friction coefficients of CuN PTFE at the low sliding speed(0.44m/s) and the oil temperature ($60^{\circ}C$) were higher than that of virgin PTFE. And a thin nano copper particles impreganated thickness was formed on the surface in the PTFE and the specimen with this treatment has much better friction properties than the original one. Fortunately, at the high load(80 N) and the oil temperature, the friction coefficient of CuN PTFE was lower than that of virgin PTFE. This evidenced the load carrying capacity of CuN PTFE was much better than that of virgin PTFE under the high load condition(80 N) specially. Therefore, it can be concluded that the friction coefficient variation of CuN PTFE is very small but its wear rate decreases greatly with increase in sliding speed.

• Membrane and Water Treatment
• /
• 제8권1호
• /
• pp.73-88
• /
• 2017

Adsorption kinetics of aqueous ferric ion ($Fe^{3+}$) onto bio-natural rice grains (BRG) have been studied in a batch system. The influence of contact time (0-180 minutes), the dosage of BRG adsorbent (10, 20, 40, and $60gL^{-1}$), and ambient temperature (27, 37, 47, and $57^{\circ}C$) for the adsorption system have been reported. The equilibrium time achieved after 20 minutes of adsorption contact time. The maximum removal of ferric ion is 99% by using $60gL^{-1}$ of BRG, $T=37^{\circ}C$, and $50mgL^{-1}$ ferric ion solution. Adsorption kinetic and diffusion models, such as pseudo-first order, pseudo-second order, and Weber-Morris intra-particle diffusion model, have been used to describe the adsorption rate and mechanism of the ferric ion onto BRG surface. The sorption data results are fitted by Lagergren pseudo-second order model ($R^2=1.0$). The kinetic parameters, rate constant, and sorption capacities have been calculated. The new information in this study suggests that BRG could adsorb ferric ion from water physiosorption during the first 5 minutes. Afterward, the electrostatic interaction between ferric ion and BGR-surface could take place as a very weak chemisorptions process. Thus, there is no significant change could be noticed in the FTIR spectra after adsorption. I recommend producing BGR as a bio-natural filtering material for removing the ferric ion from water.

• 대한한의학회지
• /
• 제26권3호
• /
• pp.162-175
• /
• 2005

Backgrounds : Two stress pathways, the hypothalamic-pituitary-adrenal (HPA) axis and the sympathetic nervous system, regulate immune system responses through release of corticosteroids, norepinephrine and epinephrine. respectively. These neuromediators act on immune cells via specific receptors on their surface to modulate the production of key regulatory cytokines. Objectives : To evaluate the preventive effects of oriental medicine Hyeolbuchukyeo-tang (HC) on stress. Methods : Mice were divided into three groups: nounal group, control group under immobilization stress and HC group which received Hyeolbuchukyeo-tang (HC) under immobilization stress. following sacrifice, their splenocytes were isolated and splenocyte surface markers were determined. The brains were removed and mRNA determined. In vivo, we separated RNA Iron cultured macrophages (RAW264.7). Results : In our study, immune functions were decreased in stress due mainly to changes of various neuromediators, cytokines and macrophage activities, and the treatment of HC increased those expressions. Conclusions : In summary, the present study documents the anti-stress effects of HC through stress-immune regulation.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.348-356
• /
• 2021

In this study, optical diagnosis of plasma was performed for nitrogen doping in graphene using a horizontal inductively coupled plasma (ICP) system. Graphene was prepared by mechanical exfoliation and the ICP system using nitrogen gas was ignited for plasma-induced and defect-suppressed nitrogen doping. In order to derive the optimum condition for the doping, plasma power, working pressure, and treatment time were changed. Optical emission spectroscopy (OES) was used as plasma diagnosis method. The Boltzmann plot method was adopted to estimate the electron excitation temperature using obtained OES spectra. Ar ion peaks were interpreted as a reference peak. As a result, the change in the concentration of nitrogen active species and electron excitation temperature depending on process parameters were confirmed. Doping characteristics of graphene were quantitatively evaluated by comparison of intensity ratio of graphite (G)-band to 2-D band, peak position, and shape of G-band in Raman profiles. X-ray photoelectron spectroscopy also revealed the nitrogen doping in graphene.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.109-114
• /
• 2005

본 연구에서는 기상용 제오카본을 수처리에 적합하도록 염산으로 표면 개질 하였으며, 개질된 제오카본을 이용하여 단일 공정을 통한 암모니아성 질소와 질산성 질소 동시 제거 가능성을 평가하고자 하였다. 제오카본과 비교하여 표면 개질 제오카본의 강도가 62% 정도 증가하였으며, 암모니아성 질소와 질산성 질소 및 총질소 제거율이 약 2배 증가하였다. 또한 암모니아성 질소와 질산성 질소 제거 효율은 pH 및 온도 변화에 거의 영향을 받지 않았다. 따라서 수중에 존재하는 암모니아성 질소와 질산성 질소의 동시 제거가 매우 효과적으로 이루어질 수 있었으며, 본 연구 결과를 토대로 암모니아성 질소와 질산성 질소를 동시 제거할 수 있는 단일 공정 설계를 위한 기본 데이터 제시가 가능하였다.

• 한국습지학회지
• /
• 제13권3호
• /
• pp.481-488
• /
• 2011

금강수계의 논산 양지리에 위치한 인공습지는 축산폐수처리시설에서 방류되는 처리수의 추가처리와 함께 강우시 유역에서 유출되는 비점오염물질을 처리하기 위하여 설치되었다. 본 시설은 2008년 설치된 이후부터 시설검증을 위한 모니터링을 수행중에 있으며 본 연구결과는 시설의 설치 직후로부터 1년간의 모니터링 결과를 정리한 것이다. 모니터링 결과, 평균 오염물질 저감효율은 TSS가 86%, BOD가 60%, TN은 45%, TP의 경우 70%로 산정되었다. 대부분의 모니터링에서 입자상 물질과 인의 평균 저감효율이 60% 이상의 높은 저감효율을 보이는 반면 질소의 경우 축산폐수의 높은 질소농도에 비해 낮은 유기물 농도에 의하여 낮은 저감효율을 나타내는 것으로 분석되었다. 따라서 유출수내 질소제거능 향상을 위해서는 긴 수리학적 체류시간 및 추가적 DO공급이 필요한 것으로 평가되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.654-661
• /
• 2005

Copper is a well known alloying element that is used to improve the resistance to general corrosion of stainless steel And also Cu cation have the anti-fouling effect to inhibit adhesion of the marine algae and shellfish to the surface of heat exchanger cooling pipe or outside wall of the ship, Therefore there are some anti-fouling methods such as anti-fouling Paint mixed with copper oxide or MGPS(Marine Growth Preventing System) by using Cu cation dissolved to the sea wather solution. Cu cation can be dissolved spontaneously by galvanic current due to Potential difference between Cu and cooling pipe of heat exchanger with Ti material, which may be one of the anti-fouling designs. In this study the effect of annealing heat treatment to galvanic current and Polarization behavior was investigated with a electrochemical points of view such as measurement of corrosion Potential, anodic polarization curve. cyclic voltammetric curve, galvanic current etc The grain size of the surface in annealed at $700^{\circ}C$ was the smallest than that of other annealing temperatures. and also the corrosion Potential showed more positive potential than other annealing temperatures. The galvanic current between Ti and Cu with annealed at $700^{\circ}C$ was the largest value in the case of static condition. However its value in the case of flow condition was the smallest than the other temperatures. Therefore in order to increase anti-fouling effect by Cu cation, the optimum annealing temperature in static condition of sea water is $700^{\circ}C$, however non- heat treated specimen in the case of flow condition may be desirable.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.95-95
• /
• 2010

자동차 산업에서 차체를 성형하는 프레스 금형 산업은 꾸준히 증가하고 있는 자동차 생산대수와 함께 성장해가고 있으며, 자동차 산업의 국제 경쟁이 심해지고 소비자들의 요구가 다양해짐에 따라 신제품 개발주기에 발맞추어 금형의 제작에도 단납기 및 비용절감을 위한 노력과 제품의 품질 향상을 위해 신기술, 신공법이 적용되고 있다. 한편 자동차 차체를 제작하는 프레스 금형가공은 박판소재를 원하는 형상으로 제작하는 공정으로써, 프레스의 상 하 운동을 이용하여 강판을 성형한다. 이러한 금형의 형태는 곧 자동차 차체 제품의 형태를 완성하므로 제품을 성형하는 도중에 금형과 소재의 마찰에 의해 금형의 마모나 마멸이 발생하여 제품의 품질을 저하시킬 우려가 있다. 따라서 금형의 내마모성 및 수명을 향상시키기 위한 방안들 중 표면경화처리가 행해지고 있으며, 그중 공정 속도가 빠르고 국부적인 열처리가 가능한 레이저 표면처리 방법이 많은 관심을 받고 있다. 본 연구에서는 이러한 금형의 성질을 향상시키기 위해 고출력 다이오드 레이저를 이용하여 프레스 금형공정 중 드로잉(drawing) 공정에의 적용을 위한 표면경화처리를 실시하였다. 최대출력 4.0kW의 다이오드 레이저를 사용하였으며, 6축 외팔보 로봇에 열처리용 광학계를 장착하여 열처리를 실시하였다. 또한 광학계 부근에는 적외선 온도센서가 부착되어있어 열처리시 시험편의 표면온도를 실시간으로 측정할 수 있도록 구성되어져있다. 시험편은 금형재료용 구상흑연 주철인 FCD550 소재를 사용하였으며, 공정변수에 따른 열처리 특성을 파악하고, 그 경화특성을 평가하였다. 실험 결과, FCD550 소재의 표면 열처리시 레이저 출력 3.5kW, 빔 이송속도 3mm/sec에서 최적의 열처리 특성을 나타내었으며, 이때의 최고 경도는 930Hv을 나타내며 모재에 비해 경도가 3배 정도 상승하는 우수한 경화특성을 보였다.

• 열처리공학회지
• /
• 제31권1호
• /
• pp.6-11
• /
• 2018

The anodic oxidation behavior of Si-containing aluminum alloy for diecasting was investigated. Especially, the property changes during anodization both on aluminum 1050 and 9 weight percentage silicon containing aluminum (Al-9Si) alloys were analyzed by the static current test. In order to fabricate a uniform anodic oxidation film by effect of Al-Si compound, nitric acid containing hydrofluoric acid had been used as a desmutter for aluminum alloy after alkaline etching. It was found that the level of voltage of Al-9Si alloy during the static current test was almost as double as higher than aluminum 1050 through anodization. By adding hydrofluoric acid in the nitric acid electrolyte, the silicon compound on the surface was removed, and the optimum amount of added hydrofluoric acid could be derived. It was also observed that the size of silicon compound formed on the surface could be refined by heat treatment at $500^{\circ}C$ and followed water quenching.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.772-778
• /
• 2006

Silk organza can make the silhouette of clothes bulky and rich, owing to its stiffness. And silk organza in the gum has better dyeability so can be dyed more bright and deeper color than scoured silk because silk organza has sericin gum that has better dyeability than fibroin. So, silk organza came into the most broad use as the material for Hanbok, especially in summer. But the silk organza has poor color fastness. Sericin is removed from organza when silk organza go through scouring. The purpose of this research is to find out the optimum conditions that the scoured silk fabrics can get stiffness by persimmon juice treatment. For experiments, non scoured, partially scoured and fully scoured silk fabrics were prepared by alkali treatments. Then 3 kinds of silk fabrics were treated with the concentration of 1, 5, 10, 50 and 100% of persimmon Juice. The change of fiber surface of the various silk fabrics were observed By SEM. The hand values of those fabric samples also were measured hand values by Kawabata Evaluation System and stiffness by Cantilaver method. By scouring, the silk organza got more flexibility and less cohesiveness between their fibers. And it can be a little more bulky by removing gum. Namely, silk organza lost its unique stiff and crisp handle. By the persimmon juice treatment, tannin component could be coated on the fiber surface. so that the stiffness of the fabrics were improved.