• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.21-30
• /
• 2007

The inverse offset method (IOM) is widely used for generating cutter paths from the point-based surface where the surface is characterised by a set of surface points rather than parametric polynomial surface equations. In the IOM, cutter path planning is carried out by specifying the grid sizes, called the step-forward and step-interval distances respectively in the forward and transverse cutting directions. The step-forward distance causes the chordal deviation and the step-forward distance produces the cusp. The chordal deviation and cusp are also functions of local surface slopes and curvatures. As the slopes and curvatures vary over the surface, different step-forward and step-interval distances are appropriate in different areas for obtaining the machined surface accurately and efficiently. In this paper, the chordal deviation and cusp height are calculated in consideration with the surface slopes and curvatures, and their combined effect is used to estimate the machined surface error. An adaptive grid generation algorithm is proposed, which enables the IOM to generate cutter paths adaptively using different step-forward and step-interval distances in different regions rather than constant step-forward and step-interval distances for entire surface.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.176-183
• /
• 2020

구조함은 수색 및 구조작업을 위하여 크게 세 가지 형태의 잠수체계(Diver Stage Diving, Wet Bell Diving 및 Scuba Diving)를 보유하고 있다. 어떠한 잠수체계를 활용하더라도 잠수요원이 잠수작업 완료 후 상승 시에는 잠수병 예방을 위하여 잠수작업수심 및 잠수 총 시간에 해당하는 감압표에 따라 감압절차를 준수하여야 한다. 감압절차는 크게 수중감압방법과 수중 및 함상감압을 병행하여 수행하는 방법으로 나뉘게 된다. 특히 수중 및 함상감압을 함께 수행하는 방법의 경우 U.S Navy Diving Manual에 따라 수중감압에서 함상감압으로 넘어가는 단계인 Surface Interval이 5분을 초과하지 않아야 한다. 하지만 실선 테스트결과 Wet Bell Diving에서 Surface Interval이 5분을 초과하는 문제점이 발생하였다. 이에 본 논문에서는 모든 가능한 원인을 식별하여 원인분석을 실시하고, 이를 바탕으로 개선된 Wet Bell Diving의 측정결과를 나타내었다. 그 결과 개선된 잠수체계의 실선 테스트에서 Surface Interval이 5분 이내 만족함을 확인하였다. 본 논문의 연구결과는 향후 잠수체계의 운용 및 개선에 유용한 자료로 활용될 것으로 판단된다.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.43-49
• /
• 2001

A reduced machining time and increased accuracy for the sculptured surface are very important when producing complicated parts. The step-size and tool-path interval are essential components in high speed and high resolution machining. If they are small, the machining time will increase, whereas if they are large, rough surfaces will be caused. In particular, the machining time, which is key in high speed machining, is affected by the tool-path interval more than the step-size. The conventional method for calculating the tool=path interval is to select a small parametric increment of a small increment based on the curvature of the surface. However, this approach also has limitations. The first is that the tool-path interval can not be calculated precisely. The second is that a separate tool-path interval needs to be calculated in each of the three cases. The third is that the conversion from Cartesian domain to parametric domain or vice versa must be necessary. Accordingly, the current study proposes a new tool-path interval algorithm that do not involve a curvature and that is not necessary for any conversion and a variable step-size algorithm for NURBS.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.479-482
• /
• 2002

The purpose of this paper is to present and discuss some of evaporation and desiccation observed in field experiments. Surface desiccation of dredged material is basically changed by evaporation characteristics which is controlled by weather and ploughing interval, etc. This study shows that ploughing interval is important factors in desiccation of dredged soft clay. A series of field experiments with variation of ploughing interval were carried out to get evaporation effiency and strength increase. In this study, it is proposed that ploughing technique on the total surface area expedites surface desiccation efficiency. Desiccation efficiency is improved when ploughing technique is applied on the surface area.

• Restorative Dentistry and Endodontics
• /
• 제2권1호
• /
• pp.50-54
• /
• 1976

16 healthy teeth extracted have been selected and their color and structural change have been observed at the fixed temperatures of $200^{\circ}F$., $400^{\circ}F$., $600^{\circ}F$., and $800^{\circ}F$. respectively at the intervals of 10min. 30min and 60min. The results were as follows: 1) $200^{\circ}F$ Groop: At the 60 minutes interval, crown surface shows pattern simliars to mottled teeth and roots take on light yellowish colar and interglobular dentin tends to be rough. 2) $400^{\circ}C$ Groop: at the 30 minutes interval, cracks begin to show in the direction of long axis of the teeth and crown surface have been observed on the verge of fracture at the 60 minutes interval. 3) $600^{\circ}F$ Groop: Crowns take on grayish-white color thoroughout 10, 30 and 60 minutes intervals and roots reveal black color. Moreover the seperation of enamel from dentin has been confirmed at the 60 minutes interval and inner dentin has changed black. 4) $800^{\circ}F$ Groop: Crowns take on the same grayish-white color as at the $600^{\circ}F$ at the 10, 30 and 60 minutes intervals and roots reveal gray color at the 30 and 60 minutes intervals, while parts of the crown have fractured at the 10 minutes interval. Inner dentin has turned gray at the 60 minutes interval.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.138-143
• /
• 2000

The establishment of a practical ultra-precision grinding technique using Diamond and CBN wheels is one of the major key technolo-gies to improve production techniques for machine-to-difficult materials without finishing process such as lapping and polishing. But the special efficient dressing technique for ultra-fine grit type grinding wheels to stabilize the grinding ability was not developed. Recently electrolytic in-process dressing technique is proposed to ultra-fine grit type metal bonded diamond wheels to protrude abra-sives continuously from the tool surface. This technology can be widely used to surface grinding and cylindrical grinding but cannot be used efficiently to internal grinding because of the electrode attachment trouble. This paper describes the effect of interval type electrolytic dressing as proposed newly to cast iron bonded diamond wheel for efficient internal grinding with mirror type high quality ground surface.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.153-159
• /
• 2006

Nanodiamond films were deposited on Si substrate by introducing a time dependent on/off modulation of $CH_4\;and\;O_2$ flows in a vertical-type microwave plasma enhanced chemical vapor deposition system. Surface morphology and diamond quality of the film were investigated as a function of the on/off modulation time interval. The diamond nucleation density on the substrate was enhanced under low temperature and low pressure condition. In addition, the diamond nucleation density was enhanced by increasing the on/off modulation time interval. Enhanced diamond quality was noticeable under the condition of a longer on/off modulation time interval. It was suggested that the nanodiamond nuclei formed the cluster formation.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.178-188
• /
• 2010

This paper addresses the problem of determining if two surfaces intersect tangentially or transversally in a mathematically consistent manner and approximating an intersection curve. When floating point arithmetic is used in the computation, due to the limited precision, it often happens that the decision for tangential and transversal intersection is not clear cut. To handle this problem, in this paper, interval arithmetic is proposed to use, which provides a mathematically consistent way for such decision. After the decision, the intersection is traced using the validated ODE solver, which runs in interval arithmetic. Then an iterative method is used for computing the accurate intersection point at a given arc-length of the intersection curve. The computed intersection points are then approximated by using a B-spline curve, which is provided as one instance of intersection curve for further geometric processing. Examples are provided to demonstrate the proposed method.

• 대한가정학회지
• /
• 제11권4호
• /
• pp.363-373
• /
• 1973

The Sewability was tested with the seam strength and Puckering Grade by a general sewing machine according to some properties of simulated Leather, yarn tensile strength needle and stitches. The main results tested are as follows ; 1. The thick and uncomfortable leather is unable to be sewed by a general sewing machine, but the thin and soft one is able to. 2. The interval between stitches depends on type of leather used, and the variance in accordance with type of leather varies much more in the case of narrower interval. 3. When the sewability of leather-surface is not so good, is desirable to pour oil on the surface for the purpose of better efficiency. 4. The seam strength is directly proportional to interval of stitch and tensile strength of yarn and leather used, and needle No. 14 is more effective than No.1l. 5. The more the soft and thin leather is, the lower the Puckering Grade becomes. Type of yarn and interval of stitches do not seem to effect the Puckering Grade.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.68-74
• /
• 2002

The FD process is analogous to the direct piston extrusion process where the cold feed filament acts as a piston extruding the molten filament from the heated liquefier through a nozzle. The extruded filament is deposited on top of futureless platform, where the liquefier and the nozzle move in X and Y direction control by computer based on the part geometry. After the first layer, the Z platform indexes down and the next layer get deposited on top of the first layer. the layer by layer building process introduces surface problem. This paper describes effect of slice interval of the parts built by fused deposition modelling rapid prototyping system.