Browse > Article

The Influence of Surface Roughness on Slice Interval Adjustment at FDM  

하만경 (부경대학교 기계공학부)
전재억 (부경대학교 대학원)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.11, no.4, 2002 , pp. 68-74 More about this Journal
Abstract
The FD process is analogous to the direct piston extrusion process where the cold feed filament acts as a piston extruding the molten filament from the heated liquefier through a nozzle. The extruded filament is deposited on top of futureless platform, where the liquefier and the nozzle move in X and Y direction control by computer based on the part geometry. After the first layer, the Z platform indexes down and the next layer get deposited on top of the first layer. the layer by layer building process introduces surface problem. This paper describes effect of slice interval of the parts built by fused deposition modelling rapid prototyping system.
Keywords
FDM(Fused Deposition Modeling); RP(Rapid prototyping); Slice interval;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 FAD장치에서 주사간격과 시작품의 경사가 표면거칠기에 미치는 영향ㅇ /
[ 하만경;전재억;정신서 ] / 한국공작기계학회논문집   과학기술학회마을
2 /
[ Stratasys Co. ] / FDM 3000 Manual
3 괘속제품(RP)을 위한 쾌속조형기술의 최근동향 /
[ 양동렬;손현기 ] / 한국정밀공학회지   과학기술학회마을
4 급속시작을 위한 광조형시스템 개발 및 성능향상에 관한 연구 /
[ 김준안 ] / 부산대학교 생산기계공학과 박사학위 논문
5 Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish /
[ R.Ippolito;L.luliano;Politecniodi Torino ] / Annals of CIRP   DOI   ScienceOn
6 /
[ 정해도(역) ] / 적층시스템:3차원 카피기술의 신 전개
7 LOM 시스템을 이용한 패턴제작에 관한 연구 /
[ 최만성;최배호 ] / 한국정밀공학회지   과학기술학회마을
8 Part Buld Orientation Based on Volumetric Error in Fused Deposition Modelling /
[ S.H.Masood;W.Rattanawong;P.Lovenitti ] / Adv Manuf Technol   DOI   ScienceOn
9 직접 절삭을 위한 FAN 시작품 제작 방식에 관한 연구 /
[ 강재훈;이찬홍;신보성;송창규 ] / 쾌속시작기술연구회 1999년도 춘계학술대회
10 /
[ Chua Chee Kai;Leong Kah Fai ] / Rapid Prototyping