• Journal of Chest Surgery
• /
• 제7권1호
• /
• pp.1-8
• /
• 1974

Acute pulmonary edema was induced by intravenous injection of epinephrine, intravenous infusion of dextran and intratracheal instillation of acid solution index was determined from pressure volume curves in excised lungs. Surface activity was also investigated with measurements of maximum and minimum surface tension and stability index on saline extracts of same lungs. The results were as follows. 1. The expansion index of excised lung in which pulmonary edema was induced by intravenous injection of epinephrine, intravenous infusion of dextran and intratracheal instillation of acid solution was ignificantly decreased as compared with the normal control of $0.86{\pm}0.017$ to $0.74{\pm}0.03$, $0.71{\pm}0.081$and $0.76{\pm}0.02$, respectively. 2. The deflation curves of excised lungs in which pulmonary edema was induced were significantly decreased as compared with the normal controls. 3. The minimum surface tension of excised lung in which pulmonary edema was induced was significantly increased in each groups and stability index was significantly decreased as compared with the normal controls 0.78 to $0.35{\pm}0.039$, $0.29{\pm}0.02 $ and $0.31{\pm}0.083$, respectively. 4. The decrease of pulmonary surface activity in acute pulmonary edema was in proportion to the degree of pulmonary edema regardless of their etiology.

• 한국표면공학회지
• /
• 제44권6호
• /
• pp.264-268
• /
• 2011

The Molybedenium thin film is generally used on back contact material of CIGS solar cell due to low electrical resistivity and stable thermal expansion coefficient. The Mo thin films deposited on si wafer by the magnetron sputtering method. The research focused on the variation of electrical resistivity of films which deposited with various working pressure at the target power of 2.0 kW(8.4 W/). The lowest resistivity of Mo thin film showed $9.0{\mu}O$-cm at pressure of 1.5 mTorr. However, working pressure increasing up to 50 mTorr, resistivities were highly increased. The results showed that the conductivity of Mo films depended on growing structures and defects in deposition process. Surface morphology, porosity, grain size, oxidation, and bonding structures were analysed by SEM, AFM, spectroscopic ellipsometry (SE), XRD, and XPS.

• 천문학회지
• /
• 제48권2호
• /
• pp.139-154
• /
• 2015

We carry out three-dimensional hydrodynamic simulations of the supernova remnants (SNRs) produced inside molecular clouds (MCs) near their surface using the HLL code (Harten et al. 1983). We explore the dynamical evolution and the X-ray morphology of SNRs after breaking through the MC surface for ranges of the explosion depths below the surface and the density ratios of the clouds to the intercloud media (ICM). We find that if an SNR breaks out through an MC surface in its Sedov stage, the outermost dense shell of the remnant is divided into several layers. The divided layers are subject to the Rayleigh-Taylor instability and fragmented. On the other hand, if an SNR breaks through an MC after the remnant enters the snowplow phase, the radiative shell is not divided to layers. We also compare the predictions of previous analytic solutions for the expansion of SNRs in stratified media with our onedimensional simulations. Moreover, we produce synthetic X-ray surface brightness in order to research the center-bright X-ray morphology shown in thermal composite SNRs. In the late stages, a breakout SNR shows the center-bright X-ray morphology inside an MC in our results. We apply our model to the observational results of the X-ray morphology of the thermal composite SNR 3C 391.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.107-109
• /
• 1998

This paper presents mechanical analysis of gas turbine generator (113MVA, $3{\phi}$, 2P, 0.9PF, F class, 3600rpm, 60Hz, 13.8kV, 4.72kA, Air-Cooling) field coil deformation. Rotor end coil deformation is only appeared on turbine end but collector end coil is normal. Expansion direction of end coil is tangential not axial. Deformation appears more severe at top turn. Retaining ling is expanded by centrifugal force of coil and itself. In case friction coefficient between coil top surface and retaining ring insulation inner surface is small, coil end length ${\ell}$ does not change. However, in case friction coefficient big condition, coil end is expanded ${\Delta}{\ell}$ due to start and stop. Deformation is assumed about 30mm by watching photograph inner surface of retaining ring is coated by Teflon at manufacturing condition. Usually Teflon coating insulation surface is small friction coefficient. It's value 0.08${\sim}$0.15. However it's value exceeds more than 0.297. Since top turn deformation appears. The distortion and subsequent failure have occurred because of the lack of a sufficient slip-plane between the top field coil conductors and the inside surface of the retaining ring insulation on the turbine end of the field-winding.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.87-92
• /
• 2007

As expansion of balconies at apartments has been legalized, the major function of the balconies as a thermal buffer zone is disappearing. This weakens the ability of window to insulate heat and multiplies surface condensation. Thus more and more residents require solutions to increasing surface condensation and aggravation in thermal comfort. This study intends to provide basic data by evaluating performance of triple layered Low-E windows, triple layered clear windows, double layered Low-E windows and double layered clear window used for expanded balconies and marketed within the country in terms of surface condensation and thermal environment through simulation. Results revealed that no surface condensation occurred at double layered Low-E windows and triple layered Low-E windows. Surface condensation took place at double layered clear windows and triple layered clear windows at a relative humidity of 60%. Thermal environment analysis suggested that double layered clear windows showed the most time falling into the range of comfort at $23^{\circ}C$. The figure were $22^{\circ}C$ for triple layered clear windows, $22^{\circ}C$ for double layered Low-E windows and $21^{\circ}C$ for triple layered Low-E windows.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.29-35
• /
• 2023

Herein we investigated the effect of the conductive agent on the electrochemical performance of the SiOx anode. SiOx anodes have a relatively low volume expansion (~160%) compared to Pure-silicon, but have a problem in that they have a poor electrical conductivity characteristic. In this study, physical and electrochemical measurements were performed using two 0-dimensional amorphous carbon conductive agents with different crystallinity and surface area. The crystal structure of the conductive agents and the local graphitization degree were analyzed through XRD and Raman, and the surface area of the particles was observed through BET. In addition, the electrical performance according to the graphitization degree of the conductive agents was confirmed through a 4-point probe. As a result of the electrochemical cycle and rate performance, it was confirmed that the performance of SiOx using a conductive agent having a low graphitization degree and a high surface area was improved. The results in this study suggest that the graphitization degree and surface area of the amorphous carbon conductive agent may play an important role in the SiOx electrode.

• 한국지역사회생활과학회지
• /
• 제28권3호
• /
• pp.365-375
• /
• 2017

The purpose of this study was to investigate the maximal elongation rate and area expansion ratio of human skin in various postures. Five males and five females (male: $23{\pm}2yr$ in age, $177.9{\pm}4.8cm$ in height, $76.7{\pm}8.8kg$ in body weight, $24.2{\pm}2.5$ in BMI, $16.2{\pm}3.4%$ in body fat; female: $22{\pm}1yr$, $163.2{\pm}3.6cm$, $51.4{\pm}2.7kg$, $19.3{\pm}1.6$, $27.4{\pm}6.7%BF$) participated in this study. Measurements were conducted using a pen and tape on the elbow, knee, wrist, shoulder, and neck. Subjects held postures so that each joint of the body regions was bent at its maximal level. The results were as follows: 1) The maximal elongation rate of skin showed a significant difference among the regions: $16.6{\pm}3.4%$ for the wrist, $22.4{\pm}5.5%$ for the neck (back), $37.6{\pm}11.3%$ for the shoulder, $42.6{\pm}10.0%$ for the knee, and $43.9{\pm}4.0%$ for the elbow (p<0.05). 2) The maximal expansion rate of the body surface area had the greatest values on the elbow ($93.7{\pm}6.4%$) and knee ($74.8{\pm}10.8%$). 3) No significant difference was found between males and females. In summary, maximal values of skin elongation and expansion rates in vivo were greater than in vitro values known from previous reports. These results can be applied to develop electronic fibers or textiles for wearable tight fit work clothing as well as fitness wear.

• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.27-35
• /
• 2010

Asphalt Plug Joint(APJ)는 통상 무게비로 20%의 역청(bitumen)과 80%의 골재로 구성된 역청 혼합물을 이용하여 포장 사이의 신축이음부를 메꾸는 형태의 신축이음장치로, 도로 포장과 신축이음부의 매끄러운 연결을 가능케 하여 평탄성을 확보하면서 재료의 특성을 이용하여 교량 상판의 신축을 자체적으로 흡수하도록 되어 있는 매설형 신축이음장치이다. 그러나 APJ은 6-7년의 사용주기를 가지고 설계되지만 때때로 시공 후 6개월 내에 조기파손의 사례가 나타나고 있다. 이러한 조기파손은 잦은 보수 공사로 인한 교통정체 등을 유발하며 이로 인한 사회적 비용은 이음장치의 설치비용을 훨씬 상회한다. 이에 본 연구에서는 APJ의 단점을 극복할 수 있는 새로운 시스템인 Buried Folding Lattice Joint(BFLJ)을 개발하였고 시험체를 제작하여 실험을 통해 기존 시스템과 성능을 비교 분석하였다. 실험결과 APJ는 신축에 의하여 철판 양끝에서 변형이 발생하여 표면으로 확산되었다. 이 결과로 철판 끝을 따라 발생하는 아스팔트 혼합물의 변형집중으로 인한 인장균열과 접합부의 부착파괴 현상이 발생하였으며 이것이 조기파손의 원인이 된다는 것을 알 수 있었다. 반면 새로 개발된 BFLJ의 경우는 움직이는 스터드를 사용하고 고성능 재료를 사용함으로써 조인트 전체에 고른 변형을 유도하여 APJ의 변형집중의 단점을 해소할 수 있었다. 이에 새로 개발된 BFLJ는 APJ의 문제점을 극복하고 조기파손을 예방할수 있을 것이라 판단된다.

• 대한수학회논문집
• /
• 제15권1호
• /
• pp.173-181
• /
• 2000

The objective of this paper is to study two dimensional steady gravitational waves on the interface between two immiscible, inviscid and incompressible fluids bounded above by a horizontal rigid boundary and below by a rigid step. A KdV equation for the first order perturbation in an asymptotic expansion can appear. However the coefficient of the KdV theory fails in that case. By a unified asymptotic method, we overcome this difficulty and derive a modified KdV equation with forcing. We find homogeneous steady solutions and present numerical solutions.

• 한국경영과학회지
• /
• 제20권2호
• /
• pp.77-93
• /
• 1995

A mathematical model for long-rage water supply planning was formulated as a dynamic plant location problem with network arc capacity expansion, and illustative example was presented. The proposed solution procedure identifies economical construction timings of surface water supply facilities and water conveyence systems and the best water supply operating patterns as well. In this study, we present a heuristic solution procedure using Simulated annealing Method in conjunction with Bertsekas & Tseng's RELAXT-II for the 0-1 integer network problem.