• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.689-695
• /
• 1999

Supercritical fluid extraction (SFE), ultrasonic extraction (USE), and accelerated solvent extraction (ASE) were compared with the well known Soxhlet extraction for the extraction of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins(PCDDs) from the XAD-2 resin which was used to adsorb PCDDs in the atmosphere. XAD-2 resin spiked with five PCDDs was chosen as a sample. The optimum conditions for the extraction of PCDDs by SFE were turned out to be the use of CO2 modified with 10% toluene at 100 ℃ and 350 atm, with 5 min static extraction followed by 20 min dynamic extraction. SFE gave a good extraction rate with good reproducibility for PCDDs ranging from 68 to 98%. The ultrasonic extraction of PCDDs from XAD-2 was investigated and compared with other extractions. A probe type method was compared with a bath type. Two extraction solvents, toluene and acetone were compared with their mixture. The use of their mixture in probe type, with 9 minutes of extraction time, was found to be the optimum condition. The average recovery of the five PCDDs for USE was 82-93%. Accelerated solvent extraction (ASE) with a liquid solvent, a new technique for sample preparation, was performed under elevated temperatures and pressures. The effect of tem-perature on the efficiency of ASE was investigated. The extraction time for a 10 g sample was less than 15 min, when the organic solvent was n-hexaneacetone mixture (1 : 1, v/v). Using ASE, the average recoveries of five PCDDs ranged from 90 to 103%. SFE, USE, and ASE were faster and less laborious than Soxhlet extraction. The former three methods required less solvent than Soxhlet extraction. SFE required no concentration of the solvent extracts. SFE and ASE failed to perform simultaneous parallel extractions because of instrumental limitations.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.853-860
• /
• 2019

In order to meet more severe environmental regulations, oxy-fuel circulating fluidized bed(CFB) boilers or ultra supercritical CFB boilers, which are a kind of process in that solid particles moves similar to fluid, have been developed in the world. In CFB power generation processes, the method to reduce or remove sulfur dioxide is in-situ desulfurization reaction via limestone directly injected into CFB boilers. However, the desulfurization efficiencies have continuously changed because limestones injected into CFB boilers are affected by various operation conditions (Bed temperature, pressure, solid circulating rate, solid holdup, residence time, and so on). In this study, a prediction method with physical and chemical properties of limestone and operation conditions of CFB boiler for in-situ desulfurization reaction in CFB boilers has developed by integrating desulfurization kinetic equations and hydrodynamics equations for CFB previously published. In particular, the prediction equation for in-situ desulfurization was modified by using experimental results from desulfurization reactions of various domestic limestones.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.63-70
• /
• 2023

Underground carbon dioxide (CO₂) storage emerges as a pivotal strategy for mitigating atmospheric CO₂ emissions and addressing global warming concerns. This study investigates techniques to optimize storage efficiency in aquifers, which stand out for their superior capacity compared to other geological layers. The focus is on the application of nonionic and anionic surfactants to enhance CO₂ storage efficiency within confined spaces. A specialized micromodel facilitating fluid flow observation was employed for the evaluation. Experimental results revealed a noteworthy minimum 40% increase in storage efficiency at the lowest injection rate when utilizing nonionic and anionic surfactants, in comparison to pure water injection. Interestingly, no significant variations in storage efficiency were observed based on the ionicity and concentration of the surfactants under investigation. These findings have implications for guiding the selection and concentration determination of surfactants in future underground CO₂ storage endeavors.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.827-833
• /
• 2013

In this study we investigated physicochemical properties of Zanthoxylum schinifolium seeds oil base extracts. Supercritical fluid extraction (SFE), roast pressure (RPM) and steam pressure (SPM) method were used for oil base extracts. The pressure and temperature conditions of SFE method were $70{\sim}80kgf/cm^2$ and below $30^{\circ}C$, respectively, by newly designed SFE-$CO_2$ system. The yield of extraction was 38.5% at the SFE method and others were 30% in each. Refractive index of oil base extracts, there was also no difference between them as 1.470~1.473. At the SFE method, viscosity observed higher value better than two method that showed as 181.88~209.93 according to the extraction time. Three oil base extracts showed difference in color which was low in b value at SFE, especially. The result of acid value at RPM that was lower as 0.93 mg/g than 2.36~2.64 mg/g of SFE method. Saponification value ranged $182.96{\sim}196.57mg{\cdot}KOH/g$ in three extraction method. At SPM, TBA value showed as 158.96 mg/kg, but in the SFE method ranged higher value as 201.30~347.14 mg/kg. Fatty acids analysed with 18 varieties in all oil base extracts and the composition of saturated/unsaturated fatty acids was 17:83(v/v) at SEF. Especially, ${\omega}$-3,6,9 fatty acids observed at SFE and SPM, but did not appeared at RPM. Fatty acid of ${\omega}$-6,9 detected in all cases.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.171-178
• /
• 2014

The purpose of this study was to analyse the volatile components of Thymus magnus Nakai extracted by different extraction methods and reproduce scent close to original plant based on the results. For this purpose, the essential oil of T. magnus was extracted by supercritical fluid extraction (SFE), water and steam distillation (WSD) and simultaneous steam distillation and extraction (SDE) methods. The compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GC-MS). Consequently, linalool (0.1%) and trans-sabinene hydrate (0.9%) contents in the essential oil extracted by SFE method of $40^{\circ}C$ - 400 bar condition were relatively higher than compositions of the essential oil extracted by different conditions. The contents of borneol (3.82%), terpinen-4-ol (0.3%) and caryophyllene oxide (2.2%) were relatively higher at $50^{\circ}C$ - 400 bar and the contents of ${\beta}$-bisabolene (5.88%), 1-octen-3-ol (0.31%), caryophyllene (2.91%), p-cymene (2.04%) and ${\gamma}$-terpinene (0.52%) were extracted relatively higher at $50^{\circ}C$ - 300 bar. The compositions of the essential oil extracted by SFE method of $50^{\circ}C$ - 200 bar condition contained relatively higher contents of thymol (77.63%) and carvacrol (5.65%). The contents of ${\alpha}$-bisabolol (0.17%), caryophyllene (6.46%), cis-${\alpha}$-bisabolene (1.52%) and ${\beta}$-bisabolene (20.65%) in the essential oil extracted by WSD method were relatively higher than compositions of the essential oil extracted by SFE method, and by SDE method we couldn't obtained essential oil. The results of this study could be utilized to reproduce scent close to original scent of T. magnus.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1747-1752
• /
• 2012

This study investigated the physiochemical characteristics of Xanthoceras sorbifolia seed oil. Xanthoceras sorbifolia seed oil was extracted by supercritical fluid extraction (420 atm, $50^{\circ}C$), hexane extraction and heat-pressed extraction ($160^{\circ}C$, $180^{\circ}C$). Acid values and peroxide values were evaluated, as well as the degree of lipid oxidation. The heat-pressed ($160^{\circ}C$) extraction gave a $53.5{\pm}2.5%$ higher yield of oil, compared with the other extraction methods. The acid values from the super critical fluid extraction were the highest, while peroxide values were highest from the heat-pressed extraction at $160^{\circ}C$ (3.10 meq/kg). The contents of linolenic acid and oleic acid were 38.63~41.13% and 26.29~26.85%, respectively. Contents of stigmasterol and ${\beta}$-sitosterol were 6.01~6.49 mg/100 g and 58.19~59.85 mg/100 g, respectively. These results indicate that Xanthoceras sorbifolia seed oil can possibly serve as new edible oils.

• The Korea Journal of Herbology
• /
• v.28 no.4
• /
• pp.71-76
• /
• 2013

Objectives : The biological activities and compound contents of herbal medicine vary depending on manufacturing processes. In this study, we compared anti-inflammatory effects and compound contents of three kinds of multi-herbal extract HT008 produced by different manufacturing processes in order to determine chemical and biological equivalence. Methods : HT008 was produced by three different manufacturing methods: 1. Freeze dried extract of Eleutherococcus senticosus, Scutellaria baicalensis and Angelica sinensis (HT008 FD), 2. Spray dried extract of E. senticosus and S. baicalensis combined with reflux extract of A. sinensis (HT008 SD), 3. Spray dried extract of E. senticosus and S. baicalensis combined with supercritial fluid extract of A. sinensis (HT008 SF). Anti-inflammatory effects were evaluated using acetic acid induced pain model and ${\lambda}$-carageenan induced paw edema model. Compound contents were evaluated by HPLC quantitative analysis of standard compounds of HT008, eleutheroside E, baicalin, z-ligustilide. Results : HT008 FD, HT008 SD and HT008 SF significantly decreased acetic acid induced pain index and ${\lambda}$-carrageenan induced paw edema volume compared with that of control group. There was no significant difference in efficacy among the HT008 FD, HT008 SD and HT008 SF. Standard compound contents of HT008 FD, HT008 SD and HT008 SF were quantified within the range of Korean pharmacopoeia or other research. Conclusions : Three different manufacturing methods of multi-herbal extracts have been developed without noticeable difference in the efficacy or compound contents. The results might be used to establish manufacturing process and industrialization of herbal extracts.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.94-131
• /
• 2007

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.

• Journal of Applied Biological Chemistry
• /
• v.61 no.2
• /
• pp.151-155
• /
• 2018

In this study, cinnamon essential oil (CEO) was formulated as emulsifiable concentrate (EC) and a granule. For the evaluation of their negative effects on the ecosystem, acute toxicities against Cyprinus carpio was determined in a static condition. The formulations were made using CEOs extracted by 3 different methods (steam distillation (SD), solvent extraction and supercritical fluid extraction (SFE)) and were tested to obtain $LC_{50}$ values. Among the ECs, EC including CEO extracted by SFE showed highest acute toxicity against C. carpio. Among the granules, a granule including CEO extracted by SD showed highest acute toxicity against C. carpio. Nevertheless, $LC_{50}$ of EC and a granule formulation with CEOs was higher than toxicity level III of pesticide standardized by Korea rural development administration. These results were similar to those using zebrafishes. Chronic toxicities were not found for 45 days in zebrafishes until $500{\mu}gL^{-1}$ level of EC formulation including CEO obtained by the SD. Based on these results, EC formulation of CEOs may be considered to be used as environmental-friendly natural insecticides in accordance with the standards.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.2
• /
• pp.161-168
• /
• 2006

The efficiency of six different extraction methods for the analysis of aroma components from pine needle(P. densiflora) was compared by gas chromatography-mass selective detector(GC-MSD). The six methods were dynamic headspace(DHS), reduced pressure headspace(RPHS), solid-phase microextraction(SPME), simultaneous distillation-extraction(SDE), supercritical fluid extraction(SFE) and pyrolysis distillation extraction(PDE). A total of 65 compounds were identified by using the six different extraction methods. These compounds are classified into six categories in terms of chemical functionality: 25 hydrocarbons, 16 alcohols, 9 carbonyls, 6 esters, 7 acids, and 2 ethers. The aroma compounds having low boiling point were more abundant in DHS, RPHS, and SPME extracts. On the other hand, the aroma compounds having high boiling point were more abundants in SDE, SFE and PDE extracts. The acid compounds were extracted by heat-based extraction methods such as SDE, SFE, PDE, but not by DHS, RPHS and SPME, which used neither solvent nor heat. The oxygenated terpens, hexanal, hexanol, and hexadienal were more abundant in DHS and RPHS extracts, compared with the other methods.