• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.4
• /
• pp.243-247
• /
• 2010

Every products, which made by mass production, is not identical in their size but have variations in some intervals specified by tolerance dimensions. Tolerances play major role in standardization of part and its quality, and also make a huge impact on manufacturing cost. The optimal condition for tolerances is giving the values as loose as possible for low production cost while satisfying quality specification, which usually demand tight control of tolerances. Tolerance analysis is necessary to get an optimal solution for this conflict situation. This paper have studied tolerance analysis for universal joint assembly of vehicle steering system and tried to find useful results of the study for product design and quality control.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.75-83
• /
• 2010

Every mechanical part for mass production has dimensions with tolerances in engineering drawing. Tolerance is given to guarantee assemble parts together satisfying functional requirements and dimensional constraints. Tolerance is essential factor for standardization of parts or assembly and has huge influence on manufacturing cost. It will be desirable to have tolerances as broad as possible for minimizing manufacturing cost. This paper describes tolerance analysis of u-joint assembly that is a part of automobile steering system. Within the range of tolerances of parts, accumulated effect is estimated by arithmetic calculation, probability theory and Monte carlo simulation. Each result is compared to investigate the method for increasing productivity.

• Journal of Korean Society for Quality Management
• /
• v.26 no.3
• /
• pp.130-140
• /
• 1998

Studies present a guide to parameter estimation of software reliability models using SAS JMP. In this paper, we consider only software reliability growth model(SRGM), where mean value function has a S-shaped growth curve, such as Yamada et al. model, and ohba inflection model. Besides these stochastic SRGM, deterministic SRGM's, by fitting Logistic and Gompertz growth curve, have been widely used to estimate the error content of software systems. Introductions or guide lines of JMP are concerned. Estimation of parameters of Yamada et al. model and Logistic model is accomplished by using JMP. The differences between Yamada et al. model and Logistic model is accomplished by using JMP. The differences between Yamada et al. model and Logistic model is discussed, along with the variability in the estimates or error sum of squares. This paper have shown that JMP can be an effective tool I these research.

• Journal for History of Mathematics
• /
• v.11 no.2
• /
• pp.63-76
• /
• 1998

When teaching the linear regression analysis in the class, the power transformation must be introduced to fit the linear regression model for nonlinear data. Box and Cox (1964) proposed the attractive power transformation technique which is so called Box-Cox transformation. In this paper, an effective algorithm selecting an appropriate value for Box-Cox transformation is developed which is considered to find a value minimizing error sum of squares. When the proposed algorithm is used to find a value for transformation, the number of iterations needs to be considered. Thus, the number of iterations is examined through simulation study. Since SAS is one of most widely used packages and does not provide the procedure that performs iterative Box-Cox transformation, a SAS program automatically choosing the value for transformation is developed. Hence, the students could learn how the Box-Cox transformation works, moreover, researchers can use this for analysis of data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.548-553
• /
• 2008

In this paper, we propose a new swing-up control strategy for rotary inverted pendulums with restricted rotation range. The control law is derived from a Lyapunov function. The Lyapunov function is defined as the square of the sum of the absolute value of the total mechanical energy and weighted squares of the arm's angular displacement and velocity. By adjusting the weighting parameters in the Lyapunov function, we can affect the swing-up strategy such that the restriction on rotation range can be satisfied. Finally, we verify the performance of the proposed control law through simulation and experiments.

• Journal of Information Processing Systems
• /
• v.4 no.4
• /
• pp.153-158
• /
• 2008

This paper deals with the geometric fitting algorithms for parametric curves and surfaces in 2-D/3-D space, which estimate the curve/surface parameters by minimizing the square sum of the shortest distances between the curve/surface and the given points. We identify three algorithmic approaches for solving the nonlinear problem of geometric fitting. As their general implementation we describe a new algorithm for geometric fitting of parametric curves and surfaces. The curve/surface parameters are estimated in terms of form, position, and rotation parameters. We test and evaluate the performances of the algorithms with fitting examples.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.195-202
• /
• 2017

We can sometimes find instability against numerical solutions in nonlinear regression. All iterative procedures in nonlinear regression require initial parameter values to be selected. Poor starting values may result in convergence to an unwanted stationary point of the error sum of squares surface. Starting values can sometimes cause the chaos effect in the nonlinear regression model. We can find the chaos phenomena with the convergence plot of starting values in the parameter space.

• Communications of the Korean Mathematical Society
• /
• v.37 no.3
• /
• pp.915-938
• /
• 2022

We are interested in the problem of fitting a parabola to a set of data points in ℝ³. It can be usually solved by minimizing the geometric distances from the fitted parabola to the given data points. In this paper, a parabola fitting algorithm will be proposed in such a way that the sum of the squares of the geometric distances is minimized in ℝ³. Our algorithm is mainly based on the steepest descent technique which determines an adequate number λ such that h(λ) = Q(u - λ𝛁Q(u)) < Q(u). Some numerical examples are given to test our algorithm.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.708-713
• /
• 2000

The design of experiment(DOE) is getting more attention in the engineering community since it is easy to understand and apply. Recently, engineering designers are adopting DOE with orthogonal arrays when they want to design products in a discrete design space. In this research, a design flow with orthogonal arrays is defined fur structural design according to the general DOE. The design problem is defined as a general structural optimization problem. Sensitivity information is evaluated by the analysis of variance(ANOVA), and an optimum design is determined from analysis of means(ANOM). Interactions between design variables are investigated to achieve additivity which should be valid in DOE. When strong interactions exit, a method is proposed. Some methods to consider the problem are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.240-240
• /
• 2000

This paper presents two algorithms based on the concept of the frequency domain adaptive filter(FDAF). First the frequency domain recursive least squares(FRLS) algorithm with the overlap-save filtering technique is introduced. This minimizes the sum of exponentially weighted square errors in the frequency domain. To eliminate discrepancies between the linear convolution and the circular convolution, the overlap-save method is utilized. Second, the sliding method of data blocks is studied Co overcome processing delays and complexity roads of the FRLS algorithm. The size of the extended data block is twice as long as the filter tap length. It is possible to slide the data block variously by the adjustable hopping index. By selecting the hopping index appropriately, we can take a trade-off between the convergence rate and the computational complexity. When the input signal is highly correlated and the length of the target FIR filter is huge, the FRLS algorithm based on the block processing technique has good performances in the convergence rate and the computational complexity.