• 환경위생공학
• /
• 제14권2호
• /
• pp.105-112
• /
• 1999

The removal characteristic of BOD, COD,T-N, and T-P was investigated in municipal wastewater treatment with anoxic and membrane submerged aerobic reactor. It was found that BOD and COD removal rate were obtained 90% and 92%, respectively, for 90 days operation. BOD and COD loading rate did not affect to the removal efficiency because MLSS concentration in aerobic tank was highly maintained.In the case of first reactor operated with anoxic and second reactor operated as aerobic, T-N, T-P removal rate were obtained 93% and 99% respectively.It was shown that removal efficiency could be maintained stable due to the complete removal of SS and sludge production decreased with increasing of sludge retention time.

• Journal of Korean Dental Science
• /
• 제2권2호
• /
• pp.12-17
• /
• 2009

Purpose : To determine whether peri-implant crestal bone loss could be affected by systemic disease, primary ISQ value, implantation method (submerged vs. non-submerged), surface treatment, and bone density Materials and methods : Patients who underwent fixture installation from June 24, 2005 to October 23, 2008 at Seoul National University Bundang Hospital were evaluated. A total of 157 patients (male: 52, female: 85) had 346 fixtures installed. Among them, 49 patients had periapical radiographs taken 1 year after prostheses were first set. A total of 97 fixtures were implanted. In particular, 30 fixtures were installed in patients with systemic diseases such as diabetes mellitus, cardiovascular disease, hypertension, and liver disease. The immediate stability of implants was measured with $Osstell^{tm}$. Implant surface treatment was classified into two groups (RBM, Cellnest (Anodized)), and bone density, into four groups (D1~D4). The bone resorption on the mesial and distal areas of fixtures was measured with periapical radiographs using the paralleling technique, and the mean value was calculated. The length determination program in IMPAX (AGFA, Belgium) was used. Results : At least 332 out of 346 (96%) installed GS II implants were successfully osseointegrated 1 year after prostheses were first set. The mean value of the bone resorption of the installed GS II implants was 0.44mm. The minimum value was 0mm, and the maximum value, 2.85mm. There was a statistically significant difference between the implantation methods (submerged, non-submerged) with regard to the amount of alveolar bone loss 1 year after prostheses were first set (p<0.05). Non-submerged implants showed less crestal bone loss. Note, however, that other variables had no correlation with crestal bone loss (p>0.05). Conclusion : There was a statistically significant difference between the 1-stage method and 2-stage method with regard to the amount of alveolar bone loss 1 year after prostheses were first set. Systemic disease, primary ISQ value, surface treatment, and bone density were not associated with alveolar bone loss. Other variables were assumed to have a correlation with alveolar bone loss.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2000년도 침지형 분리막을 이용한 수처리 시스템 Water Treatment System Using Submerged Membranes
• /
• pp.85-109
• /
• 2000

• 대한설비공학회지:설비저널
• /
• 제18권3호
• /
• pp.240-249
• /
• 1989

• 미생물학회지
• /
• 제40권2호
• /
• pp.160-166
• /
• 2004

The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % KH$_2$PO$_4$, 0.05% The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % KH$_2$The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % $(KH_2PO_4$, 0.05% $MgSO_4{\cdot}7H_2O$, 0.2% L-asparagine, pH 4.5, and the optimal inoculum size and shaking speed were $1.5{\times}10^6$ spores/50 m1 medium and 150 rpm, respectively. On optimal conditions, 4.1 g/l of the cell mass was obtained at 28$^{\circ}C$ for 3 days. The mycelium were inoculated on 500 g of steamed rice using vinyl bag ($30.6{\times}44$ cm) and incubated at $30^{\circ}C$, 85% humidity for 21 days. Lactone form monacolin K was rapidly increased for 2 days and reached highest concentration of monacolin K (2,930 mg/kg) for 15 days, and monacolin K was decreased after 15 days.

• 유기물자원화
• /
• 제11권2호
• /
• pp.125-131
• /
• 2003

본 연구는 오수중의 유기물 및 질소 인의 동시제거를 위한 오 폐수 고도처리장치인 간접폭기형 침적생물막여과장치(Indirected Aerated Submerged Biofilter : INSUB)를 개발하기 위하여 실험실적 모형실험을 수행하였다. INSUB에서 오수를 처리함에 있어서, HRT 18시간, 공탑속도 42.5m/hr, 충전율 40%인 경우가 실제로 경제적인 효율을 고려하였을 때, 가장 효율이 좋았다. 각각의 제거효율을 살펴보면, $COD_{cr}$, 90.6%, $COD_{Mn}$ 85.3%, $BOD_5$ 95.0%, T-N 52.3% 그리고 T-P 56.8%로 나타났다. 질소 인의 고효율처리를 위해서는 전탈질공정에 의한 산화질소의 제거를 위해 무산소, 호기조의 조합 등에 의한 system의 일부 다단화가 필요함을 확인할 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제17권5호
• /
• pp.784-791
• /
• 2007

The present work aims to use a biofilter technology(aerated submerged filters) for the aerobic transformation at laboratory-scale of olive washing water(OWW) generated in the first steps of olive oil processing, as well as the genetic profiling and identification to the species level of the bacteria involved in the formation of the biofilm, by means of TGGE. Chemical parameters, such as biological oxygen demand at five days($BOD_5$) and chemical oxygen demand(COD), decreased markedly(up to 90 and 85%, respectively) by the biological treatment, and the efficiency of the process was significantly affected by aeration and inlet flow rates. The total polyphenol content of inlet OWW was only moderately reduced(around 50% decrease of the inlet content) after the biofilter treatment, under the conditions tested. Partial 16S rRNA genes were amplified using total DNA extracted from the biofilm and separated by TGGE. Sequences of isolated bands were mostly affiliated to the $\alpha-subclass$ of Proteobacteria, and often branched in the periphery of bacteria] genera commonly present in soil(Rhizobium, Reichenowia, Agrobacterium, and Sphingomonas). The data obtained by the experimentation at laboratory scale provided results that support the suitability of the submerged filter technology for the treatment of olive washing waters with the purpose of its reutilization.

• Journal of Periodontal and Implant Science
• /
• 제40권2호
• /
• pp.69-75
• /
• 2010

Purpose: Implant survival rates using a bone-added osteotome sinus floor elevation (BAOSFE) procedure with simultaneous placement of a non-submerged sand blasted with large grit and acid etched (SLA) implant are well documented at sites where native bone height is less than 5 mm. This study evaluated the clinical results of non-submerged SLA Straumann implants placed at the time of the BAOSFE procedure at sites where native bone height was less than 4 mm. Changes in graft height after the BAOSFE procedure were also assessed using radiographs for 5 years after the implant procedure. Methods: The BAOSFE procedure was performed on 4 patients with atrophic posterior maxillas with simultaneous placement of 7 non-submerged SLA implants. At least 7 standardized radiographs were obtained from each patient as follows: before surgery, immediately after implant placement, 6 months after surgery, every year for the next 3 years, and after more than 5 years had passed. Clinical and radiographic examinations were performed at every visit. Radiographic changes in graft height were calculated with respect to the implant's known length and the original sinus height. Results : All implants were stable functionally, as well as clinically and radiographically, during the follow-up. Most of the radiographic reduction in the grafted bone height occurred in the first 2 years; reduction after 2 years was slight. Conclusions: The simultaneous placement of non-submerged SLA implants using the BAOSFE procedure is a feasible treatment option for patients with severe atrophic posterior maxillas. However, the grafted bone height is reduced during the healing period, and patients must be selected with care.

• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.59-68
• /
• 1989

This study was performed employing the two stage aerated submerged biofilter of media pore size 1.5cm and 2cm, and infiuent substrate concentrations were 30.25mg COD/l, 50.1mg COD/l respectively. The purpose was to determine the treatment efficiency at the low concentration infiuent, reaction order and substrate flux with application of variable-order model that was presented by Rittmann and McCarty. . The results are as follows. 1. Treatment efficiency of 1st reactor was about BOD 82% and COD 76%, when effluent concentration was BOD 3.9 ~ 6.8, COD 7.1 ~ 12.5 mg/l, and this effluent concentration didn't satisfy the water quality grade I, II of river and lake. But as treated effluent of 1st reactor with 2nd reactor, we could achieve appropriate water quality, since instillation of 2nd reactor was needed. 2. Difference of media pore size between 1.5cm and 2cm didn't effect significantly to treatment efficiency and since this of 2nd reactor was about BOD 60%, COD 50%, an consideration of economic point of view should be carried out in field application. 3. Reaction order and substrate flux was varied 0.9851~0.9956 and 0.0028~0.0405 mg/$cm^{2} \cdot day$, and the substrate flux was increased as infiuent substrate concentration increased.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.93-104
• /
• 2020

As water resources are limited and legal regulations are strengthened, there is a growing need to reuse residuals in WTP(Water Treatment Plant). In this study, membrane filtration system was constructed and its operation method was studied for water quality stabilization and reuse of WTP residuals. The operation parameters were stable for 1 year and 6 months. Membrane fouling was identified as particulate pollution (activated carbon) and inorganic pollution (manganese). The membrane system was operated steadily with raw water of high concentration SS(Suspended solid) containing activated carbon because membrane fouling was reduced by the effect of End-Free type. In the case of inorganic contamination, dissolved manganese eluted by chemicals and acted as a membrane fouling source, and the operating conditions for minimizing membrane fouling. were confirmed by newly developing application methods and types of cleaning chemicals. Based on the results, design parameters for reducing manganese membrane fouling were derived.