• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.35-42
• /
• 2000

A cross-shaped microstripline-fed printed slot antenna having wide bandwidth Is presented in this paper. The proposed antenna is analyzed by using the Finite-Difference Time-Domain (FDTD) method. It was found that the bandwidth of the antenna depends highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The maximum bandwidth of this antenna is from 1.975 GHz to 4.725 GHz, which is approximately 1.3 octave, for the VSWR $\leq$ 2. Experimental data for the return loss and the radiation pattern of the antenna are also presented. and they are in good agreement with the FDTD results.e FDTD results.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.361-366
• /
• 2018

In this study, 200 social workers in Seoul and Gyeonggi area were surveyed using convenience extraction method. Data were analyzed by frequency, reliability, correlation, and regression analysis using IBM SPSS Statistics 20, and Sobel test was performed. The purpose of this study was to investigate the effects of empowerment on the relationship between exhaustion and organizational effectiveness of social workers and to provide basic data for improving organizational effectiveness. The results of the study are as follows. Empowerment was found to be mediated in the relationship between exhaustion and job satisfaction, which is a sub - area of organizational effectiveness. Empowerment was found to be mediated in the relationship between exhaustion and turnover intention, which is a sub - domain of organizational effectiveness. Therefore, it is necessary to have a resting place that gives a sense of security to the exhausted social worker rather than granting authority for the social welfare organization.

• Tribology and Lubricants
• /
• v.18 no.3
• /
• pp.194-203
• /
• 2002

This paper is the first step fur thermo-mechanical stress analyses of part with coated layer under contact load. A lot of coated material is applied in many structures to endure severe situation, like thermal stresses, high temperature gradients, irradiation, impacts by microscopic meteorites, and so on. In this part we are going to apply the FEM to analyze space parts with a coated layer subjected to a contact load thermo-mechanically. Coating layer is very thin in comparision with the structure, therefore it should take more times and behaviors to analyze whole model. In these reason we develop the FEM method of analyzing part with coated layer under contact load using partial model. Steady state temperature distribution of the part is obtained first, and then we apply quasi-static external load on the part. To obtain the final stage of solution, we compute the total solution, and by subtracting the thermal strain from the total ones we get the mechanical strains to compute stresses of the parts. In using the FEM, one has to discretize the model into many sub-domain, finite elements. The method is consisited of two steps. First step is to analyze the whole model with rather coarse meshes. Second step we cut a small region near the loading point, and analyze with very fine meshes. This method is allowable by the Saint-Venant's principle. And then, we finally shall check the therma1 load on the stresses of the space part with coating layer with or without substrate cracks. Then, we predict the actual behaviors of the part used in space.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.221-227
• /
• 2014

In this paper, we propose a synthesis method that can effectively suppress the ambience which affects tonal components in the PS decoder. Ambience component was obtained by using decorrelation filter and the weighting of the ambience in the decoder was determined through IC parameter. However, since the parameters are extracted in the sub-band domain, a low IC value could be analyzed even if the tonal component is dominant. The quality of the output signal may be degraded. To prevent this problem, the tonality was measured in the downmixed signal and the weighting of the ambience components were adjusted appropriately according to the measured tonality index. The performance of the proposed method was evaluated by simulations. Furthermore, the subjective test was performed and the results confirmed that the proposed method offers improved quality.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.3
• /
• pp.393-404
• /
• 2004

Recently, public home have used a more than two computer connected with network, and several home appliances using independently with internet or network are developing to be related closely with the network. Therefore, the home utilized for a simple terminal of the global network in the past is being expanded to another part of the sub network. For a variety of connecting home-area protocols with the existing existing network, we require a new Residential Gateway(RG) that does not only make the home-area network operating in the sub network but also connects to the external network. In this paper, RG has intrinsic limits against flexible service due to IP address assignment and hardware capacity. In order to solve this problem in the RG, we propose a Management Server(MS). The MS that offers the integrated managements and control services for a variety of devices connected the RG in the home-area. It can not only solve the dynamic IP address assigning problem but also assigns private IP addresses to the home network devices through the Network Address Translation(NAT). It also provides somewhat useful functions for the home network and the RG for other additional services. <중략> The MS is using a SNMP protocol for managing the RG in the domain, a polling method of the MS and the RG compose a sequence polling method, a polling method using a multi-process and a multi-thread. In this paper, we introduce a problem with polling method separately, show a polling method between the MS and the RG using a multi-thread.

• Communications of the Korean Mathematical Society
• /
• v.27 no.3
• /
• pp.557-564
• /
• 2012

This study concerns the existence of positive solution for the following nonlinear system $$\{-div(|x|^{-ap}|{\nabla}u|^{p-2}{\nabla}u)=|x|^{-(a+1)p+c_1}({\alpha}_1f(v)+{\beta}_1h(u)),x{\in}{\Omega},\\-div(|x|^{-bq}|{\nabla}v|q^{-2}{\nabla}v)=|x|^{-(b+1)q+c_2}({\alpha}_2g(u)+{\beta}_2k(v)),x{\in}{\Omega},\\u=v=0,x{\in}{\partial}{\Omega}$$, where ${\Omega}$ is a bounded smooth domain of $\mathbb{R}^N$ with $0{\in}{\Omega}$, 1 < $p,q$ < N, $0{{\leq}}a<\frac{N-p}{p}$, $0{{\leq}}b<\frac{N-q}{q}$ and $c_1$, $c_2$, ${\alpha}_1$, ${\alpha}_2$, ${\beta}_1$, ${\beta}_2$ are positive parameters. Here $f,g,h,k$ : $[0,{\infty}){\rightarrow}[0,{\infty})$ are nondecresing continuous functions and $$\lim_{s{\rightarrow}{\infty}}\frac{f(Ag(s)^{\frac{1}{q-1}})}{s^{p-1}}=0$$ for every A > 0. We discuss the existence of positive solution when $f,g,h$ and $k$ satisfy certain additional conditions. We use the method of sub-super solutions to establish our results.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.599-608
• /
• 2013

Motion compensated interpolation (MCI) techniques are used for increasing the frame rate and generating the side information in the distributed video coding (DVC) system. In this paper, an efficient MCI technique using the image resizing in the DCT or LiftLT domain is proposed, and the performance of the MCI technique using various sub-pixel generation techniques is analyzed. Extensive computer simulations show that the proposed method produces the superior results compared to the conventional methods.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.467-486
• /
• 2017

A method for decoupling reliability based design optimization problem into a set of deterministic optimization and performing a reliability analysis is described. The inner reliability analysis and the outer optimization are performed separately in a sequential manner. Since the outer optimizer must perform a large number of iterations to find the optimized shape and size of structure, the computational cost is very high. Therefore, during the course of this research, new multilevel reliability optimization methods are developed that divide the design domain into two sub-spaces to be employed in an iterative procedure: one of the shape design variables, and the other of the size design variables. In each iteration, the probability constraints are converted into equivalent deterministic constraints using reliability analysis and then implemented in the deterministic optimization problem. The framework is first tested on a short column with cross-sectional properties as design variables, the applied loads and the yield stress as random variables. In addition, two cases of curvilinearly stiffened panels subjected to uniform shear and compression in-plane loads, and two cases of curvilinearly stiffened panels subjected to shear and compression loads that vary in linear and quadratic manner are presented.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.364-370
• /
• 2006

In this paper, the decision method of optimal sub-band which is supposed to embedded watermark incorporating fuzzy inference into transform-based watermarking is proposed. After performing the DCT, maximum variation of human visual properties, such as text degree, contrast sensitivity function is calculated, and by using these, membership function is generated. After embedding the watermark to the selected bands obtained from fuzzy inference, performance of imperceptibility and robustness are evaluated. In order to testify the proposed scheme, such attacks as JPEG, filtering, cropping are utilized. and in addition, by using an AWGN channel of OFDM/QPSK system, PSNR as well as correlation are calculated, and finally evaluated the performance.

• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.27-34
• /
• 2003

Digital image manipulation software is now readily available on personal computers. It is therefore very simple to tamper with any image and make it available to others. Therefore. copyright protection of digital contents and insurance of digital image integrity become major issues. In this paper, we propose a hybrid watermarking method to identify locations of tampered region as well as copyright. Our proposed algorithms embed the PN-sequence into low frequency sub-band of the wavelet transform domain and it doesn't need the original image in extraction procedure. The experimental results show good robustness against any signal processing with tamper detection on still image.