• 한국초전도ㆍ저온공학회논문지
• /
• 제6권1호
• /
• pp.38-42
• /
• 2004

The cryogenic system for 6.6 kV/200 A inductive superconducting fault current limiter (SFCL) was developed at Yonsei university in 2003. The sub-cooled nitrogen cryogenic system could be applied to not only SFCL but also many other applied high-Tc superconducting (HTS) devices like superconducting motor, superconducting generator and superconducting magnetic energy storage (SMES). Generally, the cooling capacity of GM-cryocooler depends on the load temperature. Therefore it is necessary to perform the cooling capacity test at no load condition to calculate the exact cooling power and heat load of cryogenic system. In this research, the cooling capacity test of GM-cryocooler was executed and the heat load of developed cryogenic system was calculated. The long run operation test results of sub-cooled nitrogen cryogenic system were successful in pressure and temperature condition. Moreover, the design and fabrication method of cryogenic system were introduced and the test results were described.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.53-55
• /
• 2005

In electrical railway system, power supplied to electrical locomotive by catenary is returned to sub-station on track. The current returned to sub-station on track is return current, which is an essential factor for the safety of the wayside electrical equipment and maintenance staff. Therefore, earth system acts an important role to protect wayside electrical equipment and maintenance staff against return current. In general, individual earth system protects partially the electrical railway system, but common earth system does the whole electrical railway system and minimizes the flow of return current. In this paper, we are compared the effect of return current according to earth type by actual measurement in existing electrical railway system. The measurement was conducted at Shinchungju sub~station in high speed trains, and Guro sub-station, which is electrified section in classical line.

• 한국수소및신에너지학회논문집
• /
• 제2권1호
• /
• pp.15-21
• /
• 1990

Nickel-hydrogen battery systems with metal hydride alloys are expected to have both higher energy density and lower pollution than nickel-cadmium cells. Nickel-hydrogen storage cells are expected to be well-suited for use in space crafts for a large capacity power storage system. Their major advantages are not only a capability of deep DOD(depth of discharge) using but also with excellent durability under excessive overcharging and overdischarging. In this study, the charge/discharge capacities, anodic polarization characteristics and durability for the continious charge/diacharge cycling of the $Ti_{1-X}Zr_XVNi$ and $Ti_{1-X}Zr_XV_{0.5}Ni_{1.5}$ alloys were measured by electrochemical method. The electrode properties of the copper or nickel plated $Ti_{1-X}Zr_XV_{0.5}Ni_{1.5}$ alloys were examined with a battery charge/discharge testing system in the temperature range of -5 to $25^{\circ}C$.

• 한국재료학회지
• /
• 제14권7호
• /
• pp.505-510
• /
• 2004

The glass-ceramic based on LAS($Li_{2}O-Al_{2}O_3-SiO_{2}$) system was observed using SEM(Scanning Electric Microscopy) and AFM(Atomic Force Microscopy) and it was expected to get a correlation between the crystal size and the surface roughness through the result. At heat treatment conditions (the nucleation: $740\~800^{\circ}C$, the crystal growth: $900\~1150^{\circ}C$), the crystal size was increased from 72 to 450 nm so that the mean of surface roughness was also risen from 0.8 to 6.3 nm. Based on the results, the surface roughness of glass-ceramic is controlled by the factors, crystal size, crystallines, and the condition of heat treatment.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.37-42
• /
• 2007

The preparation of $TiC_{0.7}N_{0.3}$ powder by SHS in the system of $Ti-TiH_2-C$ ($N_2$ atmosphere) was investigated in this study. In the preparation of $TiC_{0.7}N_{0.3}$ powder, the effect of gas pressure, compositions such as Ti, $TiH_2$, C, and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $TiC_{0.7}N_{0.3}$ was $0.75Ti+0.25TiH_2+0.7C+0.5NaCl$. The $TiC_{0.7}N_{0.3}$ powder synthesized in this condition was a single phase with irregular shape.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.785-790
• /
• 2003

We have synthesized some phosphors in the system $CaO-Y_2$$O_3$-$Al_2$$O_3$by combinatorial polymerized-complex method. Composition and synthetic temperature of phosphors in the library was screened from the emission intensities of individual samples under VUV excitation. In $Tb^{ 3＋}$-activated $CaO-Y_2$$O_3$-$Al_2$$O_3$, green phosphors showing good intensity were found to be X$O_3$$O_{7}$, CaYA1O$_4$, YA1O$_3$, $Y_3$$Al_{5}$$O_{12}$, $Y_4$$A1_2$$O_{9}$ .

• 한국재료학회지
• /
• 제24권2호
• /
• pp.81-86
• /
• 2014

The nitrogen solubility and nitride capacity of $CaO-SiO_2-Al_2O_3-MgO-CaF_2$ slag systems were measured by using gas-liquid equilibration at 1773K. The nitrogen solubility of this slag system decreased with increasing CO partial pressure, with the linear relationship between nitrogen contents and oxygen partial pressure being -3/4. This system was expected to show two types of nitride solution behavior. First, the nitrogen solubility decreased to a minimum value and then increased with the increase of CaO contents. These mechanisms were explained by considering that nitrogen can dissolve into slags as "free nitride" at high basicities and as "incorporated nitride" within the network at low basicities. Also, the basicity of slag and nitride capacity were explained by using optical basicity. The nitrogen contents exhibited temperature dependence, showing an increase in nitrogen contents with increasing temperature.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.595-600
• /
• 2006

The preparation of $\beta$-SiAlON powder by SHS in the system of $Si-Al-SiO_2-NH_4F(\beta-Si_3N_4)$ was investigated in this study. In the preparation of SiAlON powder, the effect of gas pressure, compositions such as Si, $NH_4F$, \beta-Si_3N_4$ and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $\beta$-SiAlON was $3Si+Al+2SiO_2+NH_4F$. The $\beta$-SiAlON powder synthesized in this condition was a single phase $\beta$-SiAlON with a rod like morphology.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.849-854
• /
• 2003

80-373 K의 온도범위에서 La$_{2.1}$ Sr$_{1.9}$ Mn$_3$O$_{10}$ 의 열기전력의 온도의존성을 조사하였다. 저온강자성영역에서 열기전력(S)의 온도의존성은 광범위한 온도영역에서 S＝S$_{0}$ ＋S$_{1.5}$ T$^{1.5}$ ＋S$_4$T$^4$로 표현할 수 있었다. 강자성 전이온도 이하에서 열기전력의 완만한 피크 및 복잡한 온도의존성은 편력성 강자성체에서 예상되는 electron-magnon 산란으로 이해할 수 있으며, 고온에서의 열기전력은 Mott의 small polaron hopping 모델로 설명 가능하였다.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.699-714
• /
• 2021

Supercritical CO₂ (S-CO₂) Brayton cycle has been applied to various heat sources in recent decades, owing to the characteristics of compact structure and high efficiency. Understanding the research development in this emerging research field is crucial for future study. Thus, a bibliometric approach is employed to analyze the scientific publications of S-CO₂ cycle field from 2000 to 2019. In Scopus database, there were totally 724 publications from 1378 authors and 543 institutes, which were distributed over 55 countries. Based on the software-BibExcel, these publications were analyzed from various aspects, such as major research areas, affiliations and keyword occurrence frequency. Furthermore, parameters such as citations, hot articles were also employed to evaluate the research output of productive countries, institutes and authors. The analysis showed that each paper has been cited 13.39 times averagely. United States was identified as the leading country in S-CO₂ research followed by China and South Korea. Based on the contents of publications, existing researches on S-CO₂ are briefly reviewed from the five aspects, namely application, cycle configurations and modeling, CO₂-based mixtures, system components, and experiments. Future development is suggested to accelerate the commercialization of S-CO₂ power system.