• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.394-400
• /
• 2023

이 연구에서는 메탄 가스(CH₄)와 함께 사이클로프로필아민(cyclopropylamine, CPrA)과 사이클로펜틸아민(cyclopentylamine, CPeA)을 이용한 하이드레이트의 튜닝효과, 가스 저장량, 그리고 하이드레이트의 열팽창 거동에 대해 논의하였다. 메탄 가스의 저장량을 극대화시킬 수 있도록 하이드레이트 튜닝 효과를 하이드레이트에 투입된 객체 분자의 농도를 달리 함에 따라 알아보았다. (CPrA+CH₄) 하이드레이트의 경우, 0.5 mol% 정도의 농도에서 최대 튜닝효과가 발생하였으며, (CPeA+CH₄) 하이드레이트는 기존 연구와 유사한 1.0 mol% 정도의 농도에서 최대 튜닝 효과가 발생하였다. (CPrA + CH₄), (CPeA + CH₄) 하이드레이트 모두 구조 II 하이드레이트를 형성한다고 알려진(테트라하이드로퓨란 + CH₄), (사이클로펜탄 + CH₄) 하이드레이트보다 더 많은 가스량을 저장하는 것으로 밝혀졌다. 100, 150, 200, 250 K의 조건에서(CPrA + CH₄), (CPeA + CH₄) 하이드레이트의 분말 X-선 회절 분석을 통해 각 온도별 격자 크기를 알아내고 그 차이를 분석하여 열팽창 거동을 분석하였다. 이에 따라, 객체 분자의 크기 차이로 인해(CPeA + CH₄) 하이드레이트의 격자 상수가 더 큰 것으로 확인되었다.

• 한국통신학회논문지
• /
• 제27권2C호
• /
• pp.143-149
• /
• 2002

시스템의 대규모, 복잡화는 시스템의 결함 여부를 테스트하는 것을 어렵게 하고 있다. 시스템의 구성은 기능별 모듈로 나눌 수 있으며, 시스템의 각 모듈이 전체 시스템의 신뢰도에 미치는 영향의 효율적인 분석을 통해 시스템 전체에 대한 효율적인 테스트 전략을 수립할 수 있고 이는 전체 시스템 테스트의 효율을 증대시킬 수 있을 것이다. 또한 시스템 모델을 정형화된 모듈로 나타낼 경우 그 시스템의 동작상의 논리적인 정확성, 성능분석 및 신뢰성 예측 등의 여러 특성 등의 효율적인 분석이 가능하다. 본 논문에서는 시스템 모듈을 그래프 모델로 정형화하고, 이것의 시스템 동작 특성을 기반으로 한 분석을 통하여 각 모듈이 전체 시스템의 신뢰성에 미치는 영향을 분석하는 기법을 제안한다.

• 한국전산구조공학회논문집
• /
• 제22권2호
• /
• pp.173-179
• /
• 2009

축소시스템은 반복적인 계산이 요구되는 문제에서 매우 유용하게 적용될 수 있는 해석 기법이다. 최근에는 영역분할 기법과의 연동을 통해 축소시스템의 효율성이 향상되었다. 그러나 전체 도메인이 몇 개의 영역으로 분할될 때 구속조건이 부과되지 않는 영역이 만들어지게 된다. 각 부영역에서 축소시스템을 구축하기 위해서는 주자유도가 선정되어야 하고, 이를 위해서는 리츠벡터를 추출해야 한다. 리츠벡터 계산은 구속조건이 부과된 부영역에서는 일반적인 정적해석을 통해 가능하나, 경계조건이 부과되지 않은 부영역에서는 의사역행렬을 이용해야 한다. 일반적으로 의사역행렬의 사용은 상당한 계산시간과 전산자원을 필요로 하는 문제점이 있다. 본 연구에서는 이 문제점을 개선하기 위해 축소 의사역행렬 도입을 제안한다. 이 방법은 정적 축소방법을 기초로 축소 의사역행렬을 구축하여 축소된 리츠벡터 정보를 추출하고, 변환관계를 통해 전체 리츠벡터 정보를 구한다. 수치예제에서는 일반적인 의사역행렬 계산시간 및 고유치 해석 결과의 비교를 통해 제안방법의 효율성과 신뢰성을 검증한다.

• Coupled systems mechanics
• /
• 제3권1호
• /
• pp.1-25
• /
• 2014

In this work, we present the theoretical formulation, operator split solution procedure and partitioned software development for the coupled thermomechanical systems. We consider the general case with nonlinear evolution for each sub-system (either mechanical or thermal) with dedicated time integration scheme for each sub-system. We provide the condition that guarantees the stability of such an operator split solution procedure for fully nonlinear evolution of coupled thermomechanical system. We show that the proposed solution procedure can accommodate different evolution time-scale for different sub-systems, and allow for different time steps for the corresponding integration scheme. We also show that such an approach is perfectly suitable for parallel computations. Several numerical simulations are presented in order to illustrate very satisfying performance of the proposed solution procedure and confirm the theoretical speed-up of parallel computations, which follow from the adequate choice of the time step for each sub-problem. This work confirms that one can make the most appropriate selection of the time step with respect to the characteristic time-scale, carry out the separate computations for each sub-system, and then enforce the coupling to preserve the stability of the operator split computations. The software development strategy of direct linking the (existing) codes for each sub-system via Component Template Library (CTL) is shown to be perfectly suitable for the proposed approach.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.315-316
• /
• 2014

Combustion gases emit various radiation signals by chemical reaction and excited molecules in combustion system. Since temperature measurement of combustion system is very difficult, non-contact temperature measuring methods are being researched. In this paper, we propose optical system of simple structure and implement technique for measuring temperature partially in furnace using radiation wavelength signals of high temperature $CO_2$ gas generated during combustion.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.153-160
• /
• 2020

In this paper, we present a hydrostatic bearing design and rotordynamic analysis of a pump-and-drive turbine module for a 250-kW supercritical CO₂ cycle application. The pump-and-drive turbine module consists of the pump and turbine wheel, assembled to a shaft supported by two hydrostatic radial and thrust bearings. The rated speed is 21,000 rpm and the rated power is 143 kW. For the bearing operation, we use high-pressure CO₂ as the lubricant, which is supplied to the bearing through the orifice restrictor. We calculate the bearing stiffness and flow rate for various orifice diameters, and then select the diameter that provides the maximum bearing stiffness. We also conduct a rotordynamic analysis based on the design parameters of the pump-and-drive turbine module. The predicted Campbell diagram shows that there is no critical speed below the rated speed, owing to the high stiffness of the bearings. Furthermore, the predicted damping ratio indicates that there is no unstable mode. We conduct the operating tests for the pump and drive turbine modules within the supercritical CO₂ cycle test loop. The pressurized CO₂, at a temperature of 136℃, is supplied to the turbine and we monitor the shaft vibration during the test. The test results show that there is no critical speed below the rated speed, and the shaft vibration is controlled to below 3 ㎛.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1028-1032
• /
• 2009

In this study, the influences of silicon-based gas barrier films fabricated by using a facing target sputtering(FTS) system on the gas permeability for flexible displays have been investigated. Under these optimum conditions on the $SiO_x$ film with oxygen concentration($O_2/Ar+O_2$) of 3.3% and the $SiO_xN_y$ film with nitrogen concentration($N_2/Ar+O_2+N_2$) of 30% deposited by the FTS system, it was found that the films were grown about 4 times higher deposition rate than that of the conventional sputtering system and showed high transmittance about 85% in the visible light range. Particularly, the polyethylene naphthalate(PEN) substrates with the $SiO_x$ and/or $SiO_xN_y$ films showed the enhanced properties of decreased water vapor transmission rate (WVTR) over $10^{-1}\;g/m^2{\cdot}day$ compared with the PEN substrate without any gas barrier films, which was due to high packing density in the Si-based films with high plasma density by FTS process and/or the denser chemical structure of Si-N bond in the $SiO_xN_y$ film.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1236-1249
• /
• 2021

Although there are still controversial opinions and uncertainty on application of SiC_f/SiC composite cladding as next-generation cladding material for its great oxidation resistance in high temperature steam environment and other outstanding advantages, it cannot deny that SiC_f/SiC cladding is a potential accident tolerant fuel (ATF) cladding with high research priority and still in the engineering design stage for now. However, considering its disadvantages, such as low irradiated thermal conductivity, ductility that barely not exist, further evaluations of its in-pile behaviors are still necessary. Based on the self-developed code we recently updated, relevant thermohydraulic and mechanical models in FROBA-ATF were applied to simulate the cladding behaviors under normal and accident conditions in this paper. Even through steady-state performance analysis revealed that this kind of cladding material could greatly reduce the oxidation thickness, the thermal performance of UO₂-SiC was poor due to its low inpile thermal conductivity and creep rate. Besides, the risk of failure exists when reactor power decreased. With geometry optimization and dopant addition in pellets, the steady-state performance of UO₂-SiC was enhanced and the failure risk was reduced. The thermal and mechanical performance of the improved UO₂-SiC was further evaluated under Loss of coolant accident (LOCA) and Reactivity Initiated Accident (RIA) conditions. Transient results showed that the optimized ATF had better thermal performance, lower cladding hoop stress, and could provide more coping time under accident conditions.

• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.698-702
• /
• 2005

Dielectric and Piezoelectric properties of complex perovskite 0.92Pb($Zr_{1/2}Ti_{1/2})O_{3}-(0.08-x)Pb(Cu_{1/3}Nb_{2/3})O_{3}-xPb(Mn_{1/3}Nb_{2/3})O_{3}(0{\leq}x{\leq}0.080$) (PZT-PCN-PMN) system were investigated as a function of PMN content. With the increase of PMN content of the sintered specimens, tetragonal phase was coexisted with rhombohedral phase, the dielectric constant was decreased, mechanical quality factor ($Q_{m}$) was inceased, and optimal sintering temperature was increased up to 1050$^{\circ}C$. For the composition of x = 0.064 sintered at 1050$^{\circ}C$ for 2 h, 1939 of maximum mechanical quality factor ($Q_{m}$), 57$\%$ of electromechanical coupling factor ($k_{p}$), and 1100$^{\circ}C$ of dielectric constant, 0.37$\% $ of dielectric loss (tan $\delta$) were obtained.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.576-581
• /
• 2023

The Ga₂O₃ thin films were deposited using an RF sputtering system and the effect of crystallographic and optical properties under rapid thermal annealing conditions on Ga₂O₃ thin film was evaluated. A rapid thermal annealing method can fabricate a crystalline Ga₂O₃ thin film which is applied to various fields with a low cost and a high efficiency compared with the conventional post-annealing method. In this study, the Ga₂O₃ treated at 900℃ for 1 min showed the beta and gamma phases in XRD measurement. In optical properties, the crystalline Ga₂O₃ represented a high transmittance of more than 80% in the visible region and was calculated with a high optical bandgap energy of 4.58 eV. The beta and gamma phases Ga₂O₃ can be obtained by adjusting the rapid thermal annealing temperatures, and the various properties such as the optical bandgap energy can be controlled. Moreover, it is expected that crystalline Ga₂O₃ can be applied to various devices by controlling not only temperature but process time.