• The Korean Society of Law and Medicine
• /
• v.16 no.2
• /
• pp.263-291
• /
• 2015

In May, 2015, a 68 years old man, who has been Middle East Saudi Arabia and the United Arab Emirates, had high fever, muscle aches, cough and shortness of breath. he went two local hospital near his house and the S Medical Center emergency center. He was diagnosed MERS(Middle East respiratory syndrome) and the diseases had put South Korea the fear of epidemics for three months. Especially, this disease has firstly reported in Middle East Asia in September 2012 and spreaded to twenty-six countries. In 21, July, 2015, European Center for disease prevention and control reported 533 people were died and in South Korea, 186 people were infected, 36 people were died and 16,693 people were isolated from MERS. South Korea government were faced into epidemic control and blamed from public. Especially, hospital acquired infection, disease control chain, opening of information, ventilation, lack of isolation bed, the problem of function of local health center, the issue of reparation for hospital and insurance cover rate, the classification of disease, the role of Korea Centers for disease control and prevention, the culture of visiting hospital to see sick people, the issue of hospital multiple room and other related social support policy. it is time to study and discuss to solve these problems. South Korea citizens felt fear and fright from MERS. What is wore, they thought the dieses were out of their government control. It was unusual case for word except Middle East Asia. numerous tourists canceled visiting korea. South korea economic were severly damaged especially, tourism industry. South korea government should admit that they had failed initial action against MERS and take full reasonability from any damages. The government have to open information to public in terms of epidemic diseases and try to prevent any other epidemic diseases and try to work with local governments.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.41-50
• /
• 2010

The goal of this study was to develop a suitable ventilation system for high-rise hog building (HRHB) for growing-fattening with combined slatted floor pen in second story and in situ manure management system in Korea. The HRHB was constructed as 29m long, 9m wide and 7.6m high for outer dimension with an indoor height of 3.1m and 2.4 for lower and upper floor, respectively. Ventilation systems for each treatment were installed in separated rooms of HRHB. The ventilation types installed in each room were following 3 types: ventilation type 1 (V1), where air was pulled through a circular duct inlet and exhausted by fans; ventilation type 2 (V2), where air was pulled through eave inlet (side ceiling inlet) and exhausted by fans; and ventilation type 3 (V3), where air was pulled through baffled ceiling inlet and exhausted by fans. For each ventilation system, investigated air velocity under minimum, medium and maximum ventilation ratio and air flow pattern inside. The results were as follows; For air flow pattern from top to bottom, V1 showed a homogeneous vertical type, V2 showed a bilateral symmetry type and V3 showed an vertical umbrella type. Under minimum ventilation ratio, air velocity in upper floor (80cm above the slated floor) was similar for V1, V2, and V3. Under maximum ventilation ratio, air velocity in upper floor was undeviating for V1 (0.10~0.26m/s) and varied for V2 (0.12~0.63m/s) while those for V3 was relatively slow and less varied (0.07~0.15m/s). In conclusion, Duct inlet type (V1) can be applied to the development of a new HRHB with additional evaluations such as field test hog feeding.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.70-82
• /
• 2015

This study was conducted to establish an efficient screening system to identify melon resistant to Fusarium oxysporum f. sp. melonis. F. oyxsporum f. sp. melonis GR was isolated from infected melon plants collected at Goryeong and identified as F. oxysporum f. sp. melonis based on morphological characteristics, molecular analyses, and host-specificity tests on cucurbits including melon, oriental melon, cucumber, and watermelon. In addition, the GR isolate was determined as race 1 based on resistance responses of melon differentials to the fungus. To select optimized medium for mass production of inoculum of F. oxysporum f. sp. melonis GR, six media were tested. The fungus produced the most spores (microconidia) in V8-juice broth. Resistance degrees to the GR isolate of 22 commercial melon cultivars and 6 rootstocks for melon plants were investigated. All tested rootstocks showed no symptoms of Fusarium wilt. Among the tested melon cultivars, only three cultivars were susceptible and the other cultivars displayed moderate to high resistance to the GR isolate. For further study, six melon cultivars (Redqueen, Summercool, Superseji, Asiapapaya, Eolukpapaya, and Asiahwanggeum) showing different degrees of resistance to the fungus were selected. The development of Fusarium wilt on the cultivars was tested according to several conditions such as plant growth stage, root wounding, dipping period of roots in spore suspension, inoculum concentration, and incubation temperature to develop the disease. On the basis of the test results, we suggest that an efficient screening method for melon plants resistant to F. oxysporum f. sp. melonis is to remove soil from roots of seven-day-old melon seedlings, to dip the seedlings without cutting in s pore s uspension of $3{\times}10^5conidia/mL$ for 30 min, to transplant the inoculated seedlings to plastic pots with horticulture nursery media, and then to cultivate the plants in a growth room at 25 to $28^{\circ}C$ for about 3 weeks with 12-hour light per day.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.11-21
• /
• 2019

The purpose of this study is to evaluate the awareness and usability of descending life lines and simple descending life lines for fire situations in the accommodation of the public officials who are responsible for supervising the installation and maintenance of descending life lines and simple descending life lines. The main results of the study are summarized as follows. First, in comparison of the ability to distinguish between descending life lines and simple descending life lines, the majority of female public officers in general administrative services do not have the ability to distinguish between descending lifelines and simple descending life lines, so they should be able to improve their ability to distinguish descending life lines. Also, institutional strategies are needed to regularly receive education through the Safety Experience Center in order to prevent safety accidents such as falling in emergency situations. Second, as a result of verifying reusability of simple descending life lines by gender and occupation, most public officers with the exception of half of the firefighting officers were analyzed as having no ability to reuse the simple descending life lines. Therefore, it is necessary to change the relevant laws so that only the installation of descending life lines which can be used continuously is permitted, except for the simple descending life lines among the evacuation instruments to be additionally installed in each room of the accommodation. Third, in terms of the ability to perceive the maximum load of the descending life lines according to occupation, the perception ability of the rescuers was the highest and the perception ability of the fire service personnel was the lowest. In order to improve the perception abilities of the fire service personnel, it is necessary to strengthen the theoretical and practical education of descending life lines in collective education such as the command-enhancing training which is regularly carried out in fire service academy. Lastly, it is believed that it is more effective to conduct the experience training of the descending life lines by imagining the fire in accomodations rather than other facilities, because it is the location where fires are actually seen the most.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.440-453
• /
• 2019

This study was carried out to investigate the effect of watching a two-dimensional (2D) forest video and a virtual reality (VR) forest video on stress reduction in adults. Experiments were conducted in an artificial climate room, and 40 subjects participated. After inducing stress in the subjects, subjects watched a 2D gray video, 2D forest video, or VR forest video for 5 mins. The autonomic nervous system activity was evaluated continuously in terms of measured heart rate variability during the experiment. After each experiment, the subject's psychological state was evaluated using a questionnaire. The 2D forest video decreased the viewer's stress index, increased HF, and reduced heart rate compared with the 2D gray video. The VR forest video had a greater stress index reduction effect, LF/HF increase effect, and heart rate reduction effect than the 2D gray video. Psychological measurements showed that subjects felt more comfortable, natural, and calm when watching the 2D gray video, 2D forest video or VR forest video. We also found that the 2D forest video and VR forest video increased positive emotions and reduced negative emotions compared to the 2D gray video. Based on these results, it can be concluded that watching the 2D forest and VR forest videos reduces the stress index and heart rate compared with watching the 2D gray video. Thus, it is considered that the 2D forest video increases the activity of the parasympathetic nervous system, and the VR forest video increases the activity of the sympathetic nervous system. The increased activity of the sympathetic nervous system upon watching the VR forest video is judged to be positive sympathetic nerve activity, such as novelty and curiosity, and not negative sympathetic activity, such as stress and tension. The results of this study are expected to be the basis for examining the visual effects of forest healing, with hope that the utilization of VR, the technology of the fourth industrial revolution in the forestry field, will broaden.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.85-96
• /
• 2018

Developed nations have implemented various policies to reduce greenhouse gases since the 1997 Kyoto Protocol in order to minimize the effects of global warming. Korea should also reduce energy consumption in the industrial sector, and the transportation and building sectors in order to achieve its greenhouse gas reduction target of 37 percent compared to the Business As Usual levels. The government implements various laws and regulations for reducing energy consumption. To reduce energy consumption in the building sector, in particular, the Energy Conservation Design Standards are enforced according to the 'Enforcement Support for Green Building Construction'. The amount of electricity used to maintain room temperature at $28^{\circ}C$ in these buildings have a 30% reduction (measured on the walls and rooftop) in power usage compared to buildings not required to meet these standards. Although the effect of these energy savings on landscaping is proven, this demonstration is not effective for energy saving since it is not a suitable method for the 'Energy Saving Design Standards of Buildings'. For landscaping to be effective as far as a component of energy reduction, the perfusion rate of the building should be calculated based on the thermal conductivity of the component materials for the energy saving designs with respect to the basis of Article 14 of the Green Building Act. Therefore, the purpose of this study is to ensure that the planting-based mats currently being widely used in the landscape industry can have insulating performance suitable for the 'Energy Saving Design Standards' of Buildings according to the 'Enable Green Building Construction Methods'.

• Journal of Applied Biological Chemistry
• /
• v.62 no.1
• /
• pp.25-30
• /
• 2019

This study investigated the quality changes in whole super sweet corn during thermal processing to extend its shelf-life. To minimize the reduction of unique texture of whole sweet corn after the sterilization, the alcohol sanitation applied and the cold point of a whole corn ear was determined using a computer simulation. The cold point was located between the corn kernel and the cob. The microorganisms on the surface of sweet corn were reduced by more than 1 log CFU/g after alcohol sanitation, then the whole corn was treated to satisfy the degree of sterilization ($F_{121.1}=4$). The quality of sterilized sweet corn was compared with the control that was treated with steaming. The quality changes of sterilized sweet corn during storage were monitored for 9 months at $25^{\circ}C$. The hardness was maintained within 30% of its initial value. The minimum of hardness was $464.50{\pm}103.35g$ and maximum of hardness was $514.50{\pm}81.83g$. The differences in the sugar content among the samples were found, but the sugar content of corn kernel remained within 30% of the control, ranging from $28.83{\pm}1.05$ to $34.36{\pm}0.42%$. The yellowness was higher than that of control by 5%. The maximum value of yellowness was $34.36{\pm}0.42$. The general bacteria and molds and yeasts in corn kernel stored at $25^{\circ}C$ were not detected after 9 months of storage at $25^{\circ}C$. Therefore, in this study, we have demonstrated that the thermal sterilized method extends the shelf-life of whole sweet corn with minimizing its quality changes over 6 months in room temperature.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.84-87
• /
• 2018

Purpose The radiopharmaceutical used in the nuclear medicine department is used only for the specific patient according to the prescription or instruction of the doctor without selling, so it is dispensed and it is distributed and used for the examination. Radiopharmaceuticals administered to patients should be managed appropriately as well as radiation safety management during dispensation. The purpose of this study is to investigate microbial contamination during dispensation of radiopharmaceuticals Materials and Methods This study distinguished between general workbench and clean workbench and performed three tests. First, microbial cultivation test of radiopharmaceutical prepared and dispensed in general workbenches and sterile workbenches were carried out five times, respectively. The second test was performed settle plate method three times before and after the use of the exhaust filter. Finally, Adenosine Triphosphate (ATP) measurement was performed in each workbench to measure bacterial counts. In addition, ATP measurement were carried out by designating locations and items that may be contaminated during dispensation. Results In the microbial culture test, no microorganisms were detected in both samples. In the settle plate method, it was detected without using of the exhaust filter in a general workbench once. In the ATP measurement test, it was measured at the level of 400 RLU or less, which is the standard value of contamination, in both workbenches surface. In additional ATP measurement test, the refrigerator handle in the distribution room was measured above the reference value of 1217 RLU, the vacuum vial shield of the Tech Generator at 435 RLU, and the syringe holder at 1357 RLU. After environmental disinfection, the results were reduced to 311 RLU, 136 RLU, and 291 RLU. Conclusion No contamination by bacteria was found in both workbenches. However, microbial contamination may occur if the use of an exhaust filter or proper hand hygiene is not achieved. Regular inspections and management for aseptic processing themselves will be necessary.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.150-167
• /
• 2021

Since the advent of tertiary curriculum, middle school history education has been focused on political history, but many students perceive history as a simple memorization subject and complain about difficulties in abstract learning. The researcher saw this problem as caused by the history curriculum, and carried out this study for the purpose of proposing a revitalization of cultural property education in the middle school history curriculum. First, through the analysis of prior research, the usefulness of cultural property education, such as nurturing creative talent and realizing interactive history classes, was revealed, and the problems of the current political history-centered middle school history curriculum were pointed out. Afterwards, as a result of conducting an opinion survey on middle school 3rd grade students and social studies teachers, it was found that first, both middle school students and their teachers thought that the current political history-centered history had much room for improvement. Second, all groups agreed on the necessity of cultural property education in history education. However, in reality, it was found that it was not easy to sufficiently educate students about cultural property in a political history-centered curriculum. Third, teachers thought that it was necessary to improve the current history curriculum in order to enhance cultural property education. Based on these findings, the researcher suggested an improvement plan for the 2015 revised history curriculum. First, in the 'nature of the subject' section, cultural properties and historical materials should be included, and in the 'objective' section, politics, economy, society, and culture should be included. Contents related to cultural properties should be added to the sub-themes in the 'content system and achievement standards', and cultural properties-related contents should be further reinforced in the achievement standards, 'teaching, learning and evaluation'. It was suggested that this section should include cultural property learning and historical material learning, and guidance on teaching and learning methods of cultural property education should be added. If these aspects are reflected in the 2022 revised curriculum that is currently being developed, cultural property education will be improved, and more lively history education will be provided to students.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.18-26
• /
• 2021

Purpose: Generally, patients are noticed to store denture in water when removed from the mouth. However, few studies have reported the advantage of volumetric change in underwater storage over dry storage. To be a reference in defining the proper denture storage method, this study aims to evaluate the volumetric change and dimensional deformation in case of underwater and dry storage. Materials and methods: Definitive casts were scanned by a model scanner, and denture bases were designed with computer-aided design (CAD) software. Twelve denture bases (upper 6, lower 6) were printed with 3D printer. Printed denture bases were invested and flasked with heat-curing method. 6 upper and 6 lower dentures were divided into group A and B, and each group contains 3 upper and 3 lower dentures. Group A was stored dry at room temperature, group B was stored underwater. Group B was scanned at every 24 hours for 28 days and scanned data was saved as stereolithography (SLA) file. These SLA files were analyzed to measure the difference in volumetric change of a month and Kruskal-Wallis test were used for statistical analysis. Best-fit algorithm was used to overlap and 3-dimensional color-coded map was used to observe the changing pattern of impression surface. Results: No significant difference was found in volumetric changes regardless of the storage methods. In dry-stored denture base, significant changes were found in the palate of upper jaw and posterior lingual border of lower jaw in direction away from the underlying tissue, maxillary tuberosity of upper jaw and retromolar pad area of lower jaw in direction towards the underlying tissue. Conclusion: Storing the denture underwater shows less volumetric change of impression surface than storing in the dry air.