• 대한정형도수물리치료학회지
• /
• 제13권1호
• /
• pp.58-66
• /
• 2007

The purpose of this study is to understand the structure and biomechanics of the skeletal muscle. The skeletal muscle takes 40 to 45% of the whole body. Stable posture requires a balance of muscle. However, when the muscle strength is unbalanced, movement initiates. The power generated by the muscle is a primary means to adjust the equilibrium of posture and movement. The structural unit of the skeletal muscle is a long cylindrical type muscle fiber which contains hundreds of nucleus. The thickness of muscle fiber is about $10-100{\mu}m$, and its length is about 1-50cm. Muscle fiber is composed of myofibril that is covered with plasma membrane which is called sarcolemma. In understanding the movement of human body, it is important to comprehend the movement of bone and joint and the tension of muscle. Understanding the structure and biomechanics of muscle also provides basic information on clinical treatment of patients.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1964-1969
• /
• 2010

최근 건설시장 규모가 확대되고 교통산업이 발전하면서 지하철 및 터널 등과 같은 개착형 Box 혹은 Shield형 터널 구조물 등 지하구조물의 건설이 다양화되고, 그 수요도 점차 급증하고 있는 실정이다. 그러나 주로 지하에 건설되는 콘크리트 구조물은 시공시 신축이음 및 시공 조인트 등과 같은 다양한 형태의 조인트 발생과 구조물의 수축팽창에 따른 거동, 부동침하, 과다하중, 진동발생에 의한 균열로 인하여 누수가 발생되고 있다. 이에 다양한 방수공법 및 재료들이 현장에 적용되고는 있지만 지하철도, 지하철 등과 같은 진동 및 구조물의 거동이 상시적으로 발생되는 환경조건에서는 방수층의 성능이 저하되어 균열, 침식, 들뜸 등으로 물이 확산되어 재누수가 되는 악순환을 겪고 있는 실정이다. 따라서 본 연구에서는 진동 및 구조물의 거동에 대응 가능한 점착 유연형 복합방수공법을 대상으로 구조물의 거동 대응성 시험을 평가하고, 거동 및 진동이 상시적으로 발생되는 지하철, 터널 등을 대상으로 실제 현장에 적용 후 사례를 통해 구조물 거동에 대응 가능한 방수기술을 검토하였다. 이러한 거동 대응 특성을 검토한 결과 방수재가 기건 및 수중환경에서도 재료의 유연성과 부착성을 유지하여 물의 침투를 방지하고, 거동폭 $5.0mm({\pm}0.5)$ 범위에서도 거동에 대응 가능함을 알 수 있었다.

• 농촌계획
• /
• 제24권3호
• /
• pp.127-135
• /
• 2018

In countries and regions population plays an important role. Recently the importance of population migration increased as population growth slowed. Researches on population migration are mainly focused on the analysis of the population movement factors and the regional structure analysis using the network analysis method. Analysis of regional structure through population movement is not enough to explain the phenomenon of migration of small cities and rural regions. In this study, to overcome the limit of previous studies the characteristics of the population movement rate according to the size of the population were analyzed. Also network analysis using the population movement OD (Origin and Destination) and population movement rate OD were conducted and the results of them were compared. As the results of analysis by the regional population scale, the population movement by population size showed a big difference in the areas with more than 100 thousand people and less than 100 thousand people. Migration to the outside of the province was the most frequent in regions with 30,000~50,000 people. The population migration rate network analysis result showed that the new area with large population inflow capacity was identified, which could not be found in the population movement network analysis because population movement number is small. The population movement rate irate is expected to be used to identify the central regions of the province and to analyze the difference in resident attractiveness.

• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.49-55
• /
• 2007

본 논문은 광섬유 브래그 격자 센서를 이용한 대공간 구조물의 실시간 모니터링을 설명하였고, 외부 외력 작용시에 대공간 구조물의 요소인 막이나 케이블의 변형을 계측하는데 광섬유 브래그 격자 센서가 매우 적합하다는 점을 검증하고 있다. 이와 함께 대공간 구조물에 광섬유 브래그 격자 센서를 이용하여 변형을 모니터링하는 실험을 실시하였다. 장스팬의 대공간 구조물을 모니터링하기 위하여 많은 요소를 계측할 수 있는 장비가 필요하다. 실험의 결과로 광섬유 브래그 격자 센서는 외력 작용시에 정확한 계측을 보여주었다. 그러므로 대공간 구조물의 변형율을 계산할 수 있고 실시간 모니터링이 가능하다.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1802-1807
• /
• 2004

When a construction company builds a high structure, many piles should be driven into the ground by a hammer whose weight is 7,000 Kg in order to make the ground under the structure safe and strong. So, it is essential to determine whether a pile is penetrated into the ground enough to support the weight of the structure since ground characteristics at different locations are different each other. This paper proposes a visual measurement system for pile rebound and penetration movement including vibration using a high-speed line-scan camera and a specially designed mark to recognize two-dimensional motion parameters of the mark using only a line-scan camera. A mark stacking white and black right-angled triangles is used for the measurement, and movement information for vertical distance, horizontal distance and rotational angle is determined simultaneously

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.19-26
• /
• 2002

In this paper, the nonlinear structural analysis for the composite structure of the spent nuclear fuel disposal container and the 50cm thick bentonite buffer is carried out to predict the collapse of the container while the sudden rock movement of 10cm is applied on the composite structure. This sudden rock movement is anticipated by the earthquake etc. at a deep underground. Horizontal symmetric rock movement is assumed in this structural analysis. Elastoplastic material model is adopted. Drucker-Prager yield criterion is used for the material yield prediction of the bentonite buffer and von-Mises yield criterion is used for the material yield prediction of the container(cast iron insert, copper outer shell and lid and bottom). Analysis results show that even though very large deformations occur beyond the yield point in the bentonite buffer, the container structure still endures elastic small strains and stresses below the yield strength. Hence, the 50cm thick bentonite buffer can protect the container safely against the 10cm sudden rock movement by earthquake etc.. Analysis results also show that bending deformations occur in the container structure due to the shear deformation of the bentonite buffer. The elastoplastic nonlinear structural analysis for the composite structure of the container and the bentonite buffer is performed using the finite element analysis code, NISA.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.121-129
• /
• 1998

A quantitative non-contact multi-point measurement system is proposed to the measurement of three-dimensional movement of floating vessels by using digital image processing. The instantaneous three-dimensional movement of a floating structure which is floating in a small water tank is measured by this system and its three-dimensional movement is reconstructed by the measurement results. The validity of this system is verified by position identification for spatially distributed known positional values of basic landmarks set for the camera calibration. It is expected that this system is applicable to the non-contact measurement for an unsteady physical phenomenon especially for the measurement of three-dimensional movement of floating vessels in the laboratory model test.

• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.269-274
• /
• 2012

The research of the biological mimics robot which utilizes the operation of the organism is progressed on the ground, aerial, and underwater robot sector. In the field of flying robot, the research for implementing the wing movement structure of the bird and insect is progressed. The joint structure for the wing movement of the bird is implemented. The operation of the wing is simulated. For this purpose, by using the Matlab/Simulink, the joint structure of the wing is modelled. The joint movement of the wing is tested through the simulation.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.404-405
• /
• 2012

The research of the biological mimics robot which utilizes the operation of the organism and which it applies to the robot is progressed on the ground, aerial, and underwater robot sector. In the field of flying robot, the research for implementing the wing movement structure of the bird and insect is progressed. The joint structure for the wing movement of the bird is implemented. The operation of the wing is simulated. For this purpose, by using the Matlab/Simulink, the joint structure of the wing is modelled. The joint movement of the wing is tested through the simulation.