• Journal of KIBIM
• /
• v.8 no.2
• /
• pp.1-9
• /
• 2018

Nowadays Building Information Modeling (BIM) is a significant source of sharing project information in the construction industry. This method of sharing the information enhances the project understanding among stakeholders. Modeling of information using BIM is becoming an essential part of many construction projects around the globe. Despite rapid adoption of BIM in construction industry still, some sectors of the industry like earthwork have not yet reaped its full benefits. BIM has brought a paradigm shift through identification and integration of the roles and responsibilities of project participants on a single platform. BIM is a 3D model-based process which provides the insight into the efficient project planning and design. The 3D modeling can also be used significantly for the design of temporary structures in an earthwork project. This paper presents the quantity take-off methodology and parametric modeling technique for creating the temporary structures using 3D BIM process. A case study is conducted to implement the proposed temporary structure family design on a real site project. The study presented is beneficial for the earthwork project stakeholders to extract the relevant information using 3D BIM models in a project. It provides an opportunity to calculate the quantity of material required for a project accurately.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.79-83
• /
• 2005

Recently, column-supported wall structural system is frequently adopted in mixed-use high-rise buildings. Due to the sudden change of stiffness at the transfer floor proper load transfer and avoiding stress concentration are very important in column-supported wall structural system. It is revealed by many investigators that 2-dimensional analysis is not reliable and inappropriate selection of element for modeling may lead to erroneous result for gravitational loading. In this study, structural behavior of column-supported wall structure at transfer floor subject to lateral loading is compared by changing modeling methods.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.5
• /
• pp.321-329
• /
• 2007

The present pipe modeling method requires detailed inputs from a designer to generate a pipe model, and thus it takes much time for the designer to perform such task. Moreover, the pipe model has no relation with the hull structure. Thus, it is time-consuming and requires much effort if design changes arise. In this study, a generating method that generates quickly many pipes using a pipe tray and a conversion method that converts automatically the pipes into objects related with the hull structure are proposed. A pipe modeling system based on the proposed methods is developed. The applicability of the developed system is demonstrated by applying it to the generation of the pipe model of a deadweight 300,000 ton VLCC(Very Large Crude oil Carrier). The results show that the developed system can quickly generate the pipe model in relation with the hull structure.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.61-69
• /
• 2005

In the global ship structure and vibration analysis, the FE(finite element) analysis model is required in the early design stage before the 3D CAD model is defined. And the analysis model generation process is a time-consuming job and takes much more time than the engineering work itself. In particular, ship structure has too many associated structural members such as stringers, stiffness and girders etc. These structural members should be satisfied as the constraints in analysis modeling. Therefore it is necessary to support generation of analysis model with satisfying these constraints as an automatic manner. For the effective support of the global ship analysis modeling, a method to generate analysis model using initial design information within ship design process, that hull form offset data and compartment data, is developed. In order to easily handle initial design information and FE model information, flexible data structure is proposed. An automatic quadrilateral mesh generation algorithm using initial design information to satisfy the constraints imposed on the ship structure is also proposed. The proposed data structure and mesh generation algorithm are applied for the various type of vessels for the usability test. Through this test, we have verified the stability and usefulness of this system including mesh generation algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.378-382
• /
• 2011

This paper develops the core competencies of manufacturing workers, analyze the consciousness structure on the core competencies. As the analyzing method of consciousness structure, ISM(Interpretive Structural Modeling) and FSM(Fuzzy Structural Modeling) are used to classify layers and determine the connection state. However, the element of each layer is frequently changed by data. This paper suggests the method with the point of view that the structure is determined basically and the connection state of the structure model is changeable depending on the method; first to determine structure model by ISM, second to determine connection by FSM. By using this method, the objective structure model, analyzing the consciousness on the core competencies of manufacturing workers, is suggested with specialist confirm.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.182-190
• /
• 2006

The circuit modeling of interdigitated capacitors fabricated by high-k low-temperature co-fired ceramic (LTCC) sheets was investigated. The s-parameters of each test structure were measured from 50 MHz to 10 GHz, and the modeling was performed using these measured sparameters up to the first resonant frequency. Each test structure was divided into appropriate building blocks. The equivalent circuit of each building block was composed based on the partial element equivalent circuit (PEEC) method. Modeling was executed to optimize the parameters in the equivalent circuit of each building block. The validity of the extracted parameters was verified by the predictive modeling for the test structures with different geometry. After that, Monte Carlo analysis and sensitivity analysis were performed based on the extracted parameters. The modeling methodology can allow a device designer to improve the yield and to save time and cost for the design and manufacturing of devices.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.720-724
• /
• 2009

This thesis analyze structure of consciousness of success factors of company project by applying FSM(Fuzzy Structural Modeling). FSM is a theory that implied fuzzy theory to ISM(Interpretive Structural Modeling) and is known to be more valid in recognizing a complex pluralistic value system and it is also designed to choose structure model that fits reality with when it is changed by parameter p and $\lambda$. It is desirable to conduct conformity assessment to complement even though selected structure model is considered as conformed because structure model is chosen without objective evaluation for conformity. Therefore, this paper present more objective structure model through conformity evaluation using structural equation modeling on success factors to achieve company project obtained by FSM and analyze the consciousness structure according to that structure.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.109-124
• /
• 1999

The major objective of this research is to design and build the variable structure DEVS modeling & simulation framework. To do this, we have proposed the direct message passing mechanism between the model and its simulator to deal with the structural demand from the model during the simulation. In this approach, four types of basic messages are introduced for the vertical(creation/deletion of the child) and horizontal(creation/deletion of the brother) structural changes. Proposed methodology has been successfully applied to the multi-processor system and the forest fire information system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.31-43
• /
• 1994

General concepts and overall procedures of interactive graphical user interface, a preand post- processor, for building analysis are introduced. Attention is forcused on the data structures and the modeling operators which can ensure the intergrity of its database should have. An example of model building process is presented to illustrate its capability, its facilities for modifying, and for processing.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.648-650
• /
• 1998

This paper proposes a constructive algorithm for generating the Takagi-Sugeno type fuzzy model through the sequential learning from training data set. The proposed algorithm has a two-stage learning scheme that performs both structure and parameter learning simultaneously. The structure learning constructs fuzzy model using two growth criteria to assign new fuzzy rules for given observation data. The parameter learning adjusts the parameters of existing fuzzy rules using the LMS rule. To evaluate the performance of the proposed fuzzy modeling approach, well-known benchmark is used in simulation and compares it with other modeling approaches.