• Investigative Magnetic Resonance Imaging
• /
• v.3 no.2
• /
• pp.159-166
• /
• 1999

Purpose : To evaluate the effect of rotational correlation time (${\tau}_R$) and the possible related changes of other parameters, ${\tau}_M,{\;}{\tau}_S,{\;}and{\;}(\tau}_V$ of gadolinium (Gd) chelate on T1 relaxation enhancement in two pool model. Materials and Methods : The NMRD (Nuclear Magnetic Relaxation Dispersion) profiles were simulated from 0.02 MHz to 800 MHz proton Larmor frequency for different values of rotational correlation times based on Solomon-Bloembergen equation for inner-sphere relaxation enhancement. To include both unbound pool (pool A) and bound pool (pool B), the relaxivity was divided by contribution from unbound pool and bound pool. The rotational correlation time for pool A was fixed at the value of 0.1 ns, which is a typical value for low molecular weight complexes such as Gd-DTPA in solution and ${\tau}_R$ for pool B was changed from 0.1 ns to 20 ns to allow the slower rotation by binding to macromolecule. The fractional factor of was also adjusted from 0 to 1.0 to simulate different binding ratios to macromolecule. Since the binding of Gd-chelate to macromolecule cab alter the electronic environment of Gd ion and also the degree of bulk water access to hydration site of Gd-chelate, the effects of these parameters were also included. Results : The result shows that low field profiles, ranged from 0.02 to 40 MHz, and dominated by contribution from bound pool, which is bound to macromolecule regardless of binding ratios. In addition, as more Gd-chelate bound to macromolecule, sharp increase of relaxivity at higher field occurs. The NMRD profiles for different values of ${\tau}_S$ show the enormous increase of low field profile whereas relaxivity at high field is not affected by ${\tau}_S$. On the other hand, the change in ${\tau}$V does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field and the maximum relaxivity value. The results shows a parabolic dependence of relaxivity on ${\tau}_M$. Conclusion : Binding of Gd-chelate to a macromolecule causes slower rotational tumbling of Gd-chelate and would result in relaxation enhancement, especially in clinical imaging field. However, binding to macromolecule can change water enchange rate (${\tau}_M$) and electronic relaxation ($T_le$) vis structural deformation of electron environment and the access of bulk water to hydration site of metal-chelate. The clinical utilities of Gd-chelate bound to macromolecule are the less dose requirement, the tissue specificity, and the better perfusion and intravascular agents.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.27-39
• /
• 2010

Blast design equations based on the concept of scaled distances can be obtained from the statistical analysis on measured peak particle velocity data of ground vibrations. These equations represents the minimum scale distance of various recommendations for safe blasting. Two types of scaled distance widely used in Korea are the square root scaled distance (SRSD) and cube root scaled distance (CRSD). Thus, the design equations have the forms of $D/\sqrt{W}{\geq}30m/kg^{1/2}$ and $D/\sqrt[3]{W}{\geq}60m/kg^{1/3}$ in the cases of SRSD and CRSD, respectively. With these equations and known distance, we can calculate the maximum charge weight per delay that can assure the safety of nearby structures against ground vibrations. The maximum charge weights per delay, however, are in the orders of $W=O(D^2)$ and $W=O(D^3)$ for SRSD and CRSD, respectively. So, compared with SRSD, the maximum charge for CRSD increases without bound especially after the intersection point of these two charge functions despite of the similar goodness of fits. To prevent structural damage that may be caused by the excessive charge in the case of CRSD, we suggest that CRSD be used within a specified distance slightly beyond the intersection point. The exact limit is up to the point, beyond which the charge difference of SRSD and CRSD begins to exceed the maximum difference between the two within the intersection point.

• Journal of Fashion Business
• /
• v.15 no.1
• /
• pp.103-114
• /
• 2011

This study is to provide basic information on clothing fitness necessary to develop apparel products for Korean companies that want to enter or have already made inroads into the Chinese market. In an effort to serve this purpose, a standard upper torso body model for Chinese women was established by applying the Rohrer Index and Size Designation of Clothes - Women of GB/T 1335.2-1997 to Chinese women in their 20s to determine body types and its characteristics. First, according to the result of applying the Rohrer Index to categorize body types, Type 1 showed the longest vertical body length and a short horizontal length with the lowest degree of flatness. Type 2 was a standard body type with a height of 158.73cm, weight of 53.02kg and the Rohrer Index of 1.32. Type 3 had a thick and flat body shape that had the highest degree of flatness and the shortest vertical length in its upper torso among all three types of body. Second, F-test was conducted on 4 distinctive body types obtained from comparing obesity scores to verify differences in body shapes for different degree of obesity. The test result indicated significant differences in 3 of the 4 body types and showed different structural components for different degree of obesity. Third, the result of comparing correlational distributions of body types and height range, and body types and degree of obesity for all and specified age groups revealed that about 33.30% of the body types appeared in Type2-A followed by 20.18% in Type1-A, 18.40% in Type2-Y and 7.91% in Type1-Y respectively. Body types and degree of obesity for two different age groups were most frequent in Type2-A. For the group of young women in their early 20s appeared the most in Type2-A, Type1-A, Type2-Y and Type 1-Y respectively and young women in late 20s were frequent in the order of Type2-A, Type2-Y, Type1-A and Type1-Y.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.1-6
• /
• 1994

Some physicochemical properties of sugary rices were comparatively analyzed with the original cultivars, using Hwachung su-1, su-2, and Nampung su lines bred in Seoul Nat'l Univ., and EM 5 bred in Kyushu Univ. Sugary rice grains were smaller in width and thickness, and the relative dry weight of 1000 grains of sugary rices ranged from 49% to 72%, compared to normal ones. No distinct starch granules were found in endosperm of sugary rices exposured by SEM, with structural variations between Hwachung su-1 and su-2 lines. Sugary rices showed the significant increases in sucrose, glucose and fructose content, especially much higher in sucrose content showing 5.84-8.79%, in comparison with the normal ones, 1.11∼2.65%. However, sucrose and total sugar content varied within sugary lines carrying the same sugary gene, and were significantly lower in Hwachung su-2. Sugary rices, except Hwachung su-1, showed the same or lower ADV and harder gel characteristics, compared to normal ones. Protein and lipid content were much higher in sugary rices, due to the increased relative proportion of aleurone layer in brown rice caused by thicker aleurone layer than in normal rices and the reduction of endosperm part. However, there were no remarkable changes in amino acid and fatty acid compositions.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.1
• /
• pp.13-20
• /
• 1991

The flacheric virus(FV) was isolated from the diseased larvae with flaccidity symptoms of the silkworm, Bombyx mori, which were collected in Hyangnam, Kyunggi Province and in Youcheon, Kyungpook Province. The properties of the virus were investigated and compared with the Japanese FV in morphology, size, nucleic acid and structural proteins. The Hyangnam isolate had a diameter of 27$\pm$1, 7nm with speherical shape and contained RNA of which the electrophoretic pattern was same as that of the Japanese FV. The virus had four sturctural proteins and their molecular weight were estimated as 35, 000, 33, 000, 31, 000, and 11, 400 daltons, respectively. The Youcheon isolate had two different sizeds in diameter of 27$\pm$1.7nm and 21$\pm$0.8nm. The antigenicity of the Hyangnam isolate was proved to be identical to that of Japanese FV, whereas the antisera against the Youcheon isolate (mixed with two different sizes) reacted with Japanese FV and densonucleosis virus type 1, respectively. From these characteristic of the isolated viruses, it was concluded that the Hyangnam isolate was identical to the Japanese FV and the Youncheon isolate contained the same viruses as the Japanese FV and DNVI.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.295-310
• /
• 2010

Since wall paintings in Maitreya Hall of Geumsan-sa temple had displayed a serious state of damage and deterioration, a detailed examination such as structural analysis of the wall, cause of damage, and the state of deterioration have been thoroughly conducted before the conservation treatment has commenced. The most seriously deteriorated part of the wall paintings was the south wall of the building in particular in its painted and surface layer. The painted layer had formed its own layer of thick, which has been separation from the surface layer. As such problem developed the whole surface layer has been separated from the wall. The problem has been caused by two reasons: 1. the heavy weight of the roof section and it caused cracks and damage on the wall; 2. the loss of function of consolidating material and it caused discolouring and the separation of surface layer from the wall. The cause of damage on the painted and surface layers can be assumed in two ways: 1. its surrounding environment such as the change of temperature and humidity level and ultraviolet rays ; 2. the loss of mechanical function of consolidating material, synthetic resin which had been applied in the past conservation treatment. The separation of layers from the wall and cracks was caused by the mistake in choosing an applicable consolidating material and dismantling technique which had ignored a different characteristic of the wall painting of Korean buddhist temples.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.1-6
• /
• 2009

Persimmon occupied the second largest cultivation area next to apple among the fruits in Korea. Since 70 % of its cultivating field is located at slope, the efficiency of its harvesting operation is very low. Also, the traditional persimmon harvest apparatus does not seem to be efficient to use due to a structural problem. In this paper, the author has analyzed the physical properties of persimmon friut-stem system and compared detachment force with developed persimmon harvest apparatus and traditional persimmon harvest apparatus in order to solve the problems mentioned above. The results of the research are summarized as follows : 1. The weight of the persimmon is shown as 157 g on average, the lengths of stem's major axis and minor axis is shown as 4.6 mm and 3.7 mm on average, respectively, sectional area of stem is shown as $13.9mm^2$ on average and the stem length is shown as 13.6 mm on average. 2 In case of the traditional persimmon harvest apparatus, the detachment force needed when a persimmon was detached from its stem was shown as 86.3 N on average. 3. In case of the developed persimmon harvest apparatus, detachment force needed when a persimmon was detached from its stem was shown as 72.6 N on average.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.744-754
• /
• 2015

Buddhist temple construction at East Asia is considered one of the most important architecture activities together with the capital city and palace, where the pagoda is positioned at the center of a Buddhist temple as the most important element of Buddhist architecture enshrining Buddha's Sary. Accordingly, this study was performed to examine the procedure of how to build brick pagodas through the stone pagoda's internal structure between $7^{th}{\sim}9^{th}$ century while disassembling and repairing Andong Jotap-ri five-story brick pagoda. As a result, as the brick pagoda destruction phenomenon, there was a slip phenomenon by side forces, member's plastic temperature, and mixed material differences. Second, like a stone pagoda, brick pagoda is classified and constructed by the design and structural parts. According to the analysis, the design part is formed by the most edge brick, and the structure part places stone material at the buffer zone in the design brick from most edge brick and intra-center, i.e., at the space to support a side force while the top weight is vertically led. When building a brick pagoda, putting a wood pole at inside center plays the role as holding parts. In addition, the center axis is connected to the bottom of the steel pole hole, A steel pole hole has holes to safely settle down and decide the position. Because of them, the steel pole is self-loaded, which may be installed by wood rather than immovable steel.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.57-62
• /
• 2016

PURPOSES : The objective of this study is to evaluate the effect of size and depth of cavities on the pavement failure using the full-scale accelerated pavement testing. METHODS : A full-scale testbed was constructed by installing the artificial cavities at a depth of 0.3 m and 0.7 m from the pavement surface for accelerated pavement testing. The cavities were made of ice with a dimension of 0.5 m*0.5m*0.3m, and the thickness of asphalt and base layer were 0.2 m and 0.3 m, respectively. The ground penetrating radar and endoscope testing were conducted to determine the shape and location of cavities. The falling weight deflectometer testing was also performed on the cavity and intact sections to estimate the difference of structural capacity between the two sections. A wheel loading of 80 kN was applied on the pavement section with a speed of 10 km/h in accelerated pavement testing. The permanent deformation was measured periodically at a given number of repetitions. The correlation between the depth and size of cavities and pavement failure was investigated using the accelerated pavement testing results. RESULTS : It is found from FWD testing that the center deflection of cavity section is 10% greater than that of the intact section, indicating the 25% reduction of modulus in subbase layer due to the occurrence of the cavity. The measured permanent deformation of the intact section is approximately 10 mm at 90,000 load repetitions. However, for a cavity section of 0.7 m depth, a permanent deformation of 30 mm was measured at 90,000 load repetitions, which is three times greater than that of the intact section. At cavity section of 0.3 m, the permanent deformation reached up to approximately 90 mm and an elliptical hole occurred at pavement surface after testing. CONCLUSIONS : This study is aimed at determining the pavement failure mechanism due to the occurrence of cavities under the pavement using accelerated pavement testing. In the future, the accelerated pavement testing will be conducted at a pavement section with different depths and sizes of cavities. Test results will be utilized to establish the criteria of risk in road collapse based on the various conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1381-1389
• /
• 2012

The object of this study considers corrosion fatigue improvement of 7075-T6 aluminum by using shot peening treatment on 3.5% NaCl solution at room temperature. Aluminum alloy is generally used in aerospace structural components because of the light weight and high strength characteristics. Many studies have shown that an aluminum alloy can be approximately 50% lighter than other materials. Mostly, corrosion leads to earlier fatigue crack propagation under tensile conditions and severely reduces the life of structures. Therefore, the technique to improve material resistance to corrosion fatigue is required. Shot peening technology is widely used to improve fatigue life and other mechanical properties by induced compressive residual stress. Even the roughness of treated surface causes pitting corrosion, the compressive residual stress, which is induced under the surface layer of material by shot peening, suppresses the corrosion and increases the corrosion resistance. The experimental results for shot peened specimens were compared with previous work for non treated aluminum alloy. The results show that the shot peening treatment affects the corrosion fatigue improvement of aluminum alloys and the induced compressive residual stress by shot peening treatment improves the resistance to corrosion fatigue.